OpenSUSE Network :: Yast2 Nukes APACHE_SERVER_FLAGS - Configure WWW To Use SSL
Nov 25, 2010
Steps to reproduce: Tell Yast2 to configure WWW to use SSL. Tell Yast2 to set APACHE_SERVER_FLAGS in sysconfig:WWW to SSL TRAC_WSGI. Tell Yast2 to configure WWW. Yast2 will notify you about unsupported configuration changes. Tell Yast2 to exit saving changes. Tell Yast2 to examine APACHE_SERVER_FLAGS in sysconfig. Observe how the value is back to SSL. As a result, whatever you tell Yast2 to do to WWW, you have to fix sysconfig thereafter. Not funny.
View 2 Replies
ADVERTISEMENT
Nov 20, 2010
I'm using the yast2 gui interface to configure apache. I think its called yast2_http_server. I added one website with *:80 set as the virtualhost ID. When I go to add a second website with the same thing, it errors out with: The IP address is already configured on another virtual host: *:80/mydomain.com. I have another opensuse box with many websites in apache configured this way.
View 1 Replies
View Related
Jan 31, 2010
I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:
I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,
View 6 Replies
View Related
Mar 17, 2010
New to opensuse, trying to set up cache proxy and webfilter at a highschool. I have a new install of opensuse11.2 64bit installed as server. Installed squid3 stable. Trying to configure it in yast2. Now in yast2-->networkservices-->squid I get the message squid needs to be installed, continuing with Next I get message unresolved dependencies then another that squid3 conflicts with squid-2.7. Solutions offered are deinstall squid3 or don't install squid-2. I select the latter and get messages that yast might not function etc. Isn't squid3 the newer version of squid-2? Should yast2 recognize that?
View 3 Replies
View Related
Apr 5, 2011
IPV6 gets more and more interesting. YAST is failing to connect to the repositories. I have disabled ipv6 in several ways but none of them work or YAST (also Konqueror) seems to do it's own thing. I have managed to get Firefox to work see my "slow internet seems to be down to dns post" made earlier today. So as a check on the YAST problem I loaded each of the repository addresses into Firefox and lo they all connect without any problem at all. So it seems that the YAST problem is down to IPV6
In order to disable ipv6 I initially added ipv6.disable=1 to the end of all of the bootloader APPENDS. More recently following up further info on here I added a couple of lines to
/etc/modprobe.d/99-local.conf. These were:
alias net-pf-10 off
alias ipv6 off
This doesn't work either.
Maybe of use to others - It seems it's possible to see if IPV6 is active by typing the following into the command line:
ip a | grep inet6
I'm told if it is active lines will be output? So just what do I do to disable it in YAST and I hope in Konqueror too? It's beginning to look like it is enabled or disabled at the app level according to the Firefox fix.
View 4 Replies
View Related
Sep 23, 2010
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
View 3 Replies
View Related
Nov 14, 2010
I am unable to examine Apache httpd error log from YaST2 because the lines are too long; the browser just truncates them and thus it does not show any description. The only option is to save it. However, when I chose that option, YaST2 encourages me to save it in /tmp, and as soon as I do that, the log becomes accessible to every user!
View 5 Replies
View Related
Nov 6, 2010
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies
View Related
Jan 8, 2010
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
View 9 Replies
View Related
Feb 1, 2010
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
View 1 Replies
View Related
Nov 27, 2010
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
View 4 Replies
View Related
Sep 6, 2011
I'm going to come right out and say I am a complete novice with Linux/SUSE. The equipment I'm having a problem with is a little web-server that was purchased by my employer that has, quite suddenly, stopped functioning. I was changing the IP address within YaST, at which point the device offered to update itself, which I saw no harm in. Post-update, however, I was unable to so much as ping the device.
I tried "ifconfig eth0": "Error fetching interface information: Device not found." I went into network settings via YaST and found that there are two cards now listed as: RTL8111/8168B PCI Express Gigabit Ethernet controller Both IP addresses are "Not configured". The information pane, for both cards, cites:
RTL8111/8168B PCI Express Gigabit Ethernet controllerBusID : 0000:02:00.0 Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. The only difference in either of the cards is the BusID (0000:02:00.0 and 0000:03.00.0)
I can neither edit nor delete either of these cards. As I mentioned, I am a total Linux novice, and am at a total loss for what to do next, or even how to find critical information about the system itself. I know enough to check dmesg, but not enough to have any clue what to look for in the output.
View 9 Replies
View Related
Sep 18, 2009
I have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
View 9 Replies
View Related
Aug 5, 2010
I am using opensuse 11.2 with a server that has a static ip from my isp and the ip is working. I have tried with an old domain but I cannot try anymore with it. I have installed yast dns server and configured it normally. When I will buy a new domain i will asign those nameserver(s) to ns(x).domain.com with my ip address.
When the changes will take effect at the registrar it will point to my dns server. I have added two forwarders to my isp domain name servers and a zone with mydomain.com and for testing I don't have firewall. The dns server is started at boot time. That's all that is required to be done? I have to set other things before I buy the domain?
View 4 Replies
View Related
Dec 7, 2010
is SAMBA server a ftp server, if not what is the name of ftp server in linux? I want to configure and use a ftp server
View 2 Replies
View Related
Jan 24, 2010
I was trying to configure a static Ip on openSUSE but didn't get very far...I would like to do it through the terminal.
View 4 Replies
View Related
Feb 20, 2010
i using before ubuntu and in them it was simple just in the terminal sudo ppoeconfig but i dont know to config it in suse 11.2.
View 1 Replies
View Related
Apr 23, 2010
I have been working on this for about 4 hours so I am extremely frustrated. I am trying to access windows shares from my linux box. I will worry about getting my own data shared afterwards.
I was having the authentication problem described by swerdna's sticky, and it was solved by the upgrade. However apparently that is not the main problem. samba is trying to use my ISP's DNS to resolve the internal network names. I have a vague conceptual understanding of WINS and NetBIOS - but Windows does this without any extra steps. Do I need to configure my machine to also act as a WINS? how do I do that? In my searches I found a thread about "why do windows to linux users give up?" this is why.
View 2 Replies
View Related
Jun 26, 2010
I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?
I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )
I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.
View 2 Replies
View Related
Oct 18, 2010
I have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
View 3 Replies
View Related
Mar 4, 2011
I need some help install and configure my vnc session at my Opensuse.
Right now I have installed nx client which works fine and is listening on port 5901.
I also want vnc to use when I want to check exactly what is going on my work's computer (when I go home)
I am reading the tutorial here:
And I would like to ask you the following
1.
Code:
For VNC client connection remember to open ports 5901-> in the firewall. (1 port/Xsession.) nxserver is listening to 5901. How to configure vnc to listen to 5902.
2. The guide also refers that
Code:
Here we "Prestart" vnc sessions for specific users, therefore no login screen is presented. This uses more resources as the VNC Session is running even when no client is connected to the session watching it. But there in lies it's advantage, "watching a session" and "using a session" are not the same thing! This method is very usefull for starting long running programs before going home. Once home you can re-connect to the session and see how things are going.
View 3 Replies
View Related
Mar 5, 2011
I'm looking forward to the release of openSUSE 11.4, which I'm looking to install as an Internet facing gateway on a mini-ITX machine with 2 Ethernet cards. As such I've been reading up on the YaST Firewall trying to find out to configure it, and there's one thing I'd like to be able to do: 'stealth' all the firewall ports.
In other words, if someone were to hypothetically do a port scan of my external IP address, I would rather they not know whether any of the ports on my gateway are open or closed, so instead of replying with the status of those ports the packets get dropped. I've been able to do this with a product called Astaro Security Gateway, which I currently have installed on a second hand Dell Optiplex machine, but I am now looking into the possibility of installing this as a virtual machine inside an openSUSE 11.4 host (extra level of security) and would like the same functionality for the host OS.
View 9 Replies
View Related
Mar 5, 2011
I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
View 8 Replies
View Related
Jun 18, 2011
I am having opensuse 11.0 installed. I have BSNL BB plan with "Always on" connection. How to configure internet connection in opensuse11.0 ?
View 1 Replies
View Related
May 23, 2011
the following message appears after I enter the root password.
/usr/lib/YaST2/bin/y2controlcenter: symbol lookup error: /usr/lib/YaST2/bin/y2controlcenter: undefined symbol: _ZN9QListData11detach_growEPii
It doesn't launch from the root console, either. But, the text-based YaST works fine. I assume that something went wrong after my last system update. which package I need to downgrade, to get things working, again?
View 1 Replies
View Related
Mar 14, 2009
I work with a proxy serverWhen i try to update my system i am not being allowed access. it tells me that i am denied access. what can i do?
View 7 Replies
View Related
May 9, 2009
I am new to using OpenLDAP on OpenSUSE with the yast configure tool. I have used Openldap on Fedora before and there was a slapd.conf file that I could modify. It appears that the yast does something different. Anyway I need to find out what the rootdn password is, but I cannot find it since there is no slapd.conf file.
View 2 Replies
View Related
Apr 28, 2010
I am installed Opensuse 11.2 and maked all configurations and installations for Mail Server Yast. ( Postfix, Ldap ) In ldapadmin what class objects i need insert to configure e-mail client ? I am choised for test suseMailAccess and in suseMailClient inserted my e-mail and what i insert in suseMailAction ? Anyhere know howto install and configure this service ?
View 5 Replies
View Related
Aug 28, 2010
If I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?
View 1 Replies
View Related
Sep 4, 2010
I will like to know how to install ethernet drivers dell inspiron N4010 on opensuse 11.3, when I go to YaST > Network Devices > Network Settings and then I have a Warning message "Network is currently controlled by NetworkManager and its settings cannot be edited by Yast. Then I click on OK, I go to Global Options and i click on Traditional Method with ifup, and then I go to Overview and I have this information:
Name IP Address
Attansic Ethernet controller Not configured
Broadcom WLAN controller DHCP
This is my first time using openSuse, I previously install Ubuntu and I had some similar problem with the internet I hope fix that problem as soon as possible and keep using openSuse. Other thing is that I don't have any internet connection with this laptop even wire or wireless connection.
View 2 Replies
View Related
