OpenSUSE Network :: Yast2 Does Not Recognize Squid3?
Mar 17, 2010
New to opensuse, trying to set up cache proxy and webfilter at a highschool. I have a new install of opensuse11.2 64bit installed as server. Installed squid3 stable. Trying to configure it in yast2. Now in yast2-->networkservices-->squid I get the message squid needs to be installed, continuing with Next I get message unresolved dependencies then another that squid3 conflicts with squid-2.7. Solutions offered are deinstall squid3 or don't install squid-2. I select the latter and get messages that yast might not function etc. Isn't squid3 the newer version of squid-2? Should yast2 recognize that?
View 3 Replies
ADVERTISEMENT
Feb 16, 2011
I am running suse11.3 32 bit, and have installed squid3.
As far as I can tell it's not been compiled with ipv6 support.
Or have I missed some option in some file somewhere?
View 2 Replies
View Related
Jan 31, 2010
I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:
I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,
View 6 Replies
View Related
Nov 25, 2010
Steps to reproduce: Tell Yast2 to configure WWW to use SSL. Tell Yast2 to set APACHE_SERVER_FLAGS in sysconfig:WWW to SSL TRAC_WSGI. Tell Yast2 to configure WWW. Yast2 will notify you about unsupported configuration changes. Tell Yast2 to exit saving changes. Tell Yast2 to examine APACHE_SERVER_FLAGS in sysconfig. Observe how the value is back to SSL. As a result, whatever you tell Yast2 to do to WWW, you have to fix sysconfig thereafter. Not funny.
View 2 Replies
View Related
Apr 5, 2011
IPV6 gets more and more interesting. YAST is failing to connect to the repositories. I have disabled ipv6 in several ways but none of them work or YAST (also Konqueror) seems to do it's own thing. I have managed to get Firefox to work see my "slow internet seems to be down to dns post" made earlier today. So as a check on the YAST problem I loaded each of the repository addresses into Firefox and lo they all connect without any problem at all. So it seems that the YAST problem is down to IPV6
In order to disable ipv6 I initially added ipv6.disable=1 to the end of all of the bootloader APPENDS. More recently following up further info on here I added a couple of lines to
/etc/modprobe.d/99-local.conf. These were:
alias net-pf-10 off
alias ipv6 off
This doesn't work either.
Maybe of use to others - It seems it's possible to see if IPV6 is active by typing the following into the command line:
ip a | grep inet6
I'm told if it is active lines will be output? So just what do I do to disable it in YAST and I hope in Konqueror too? It's beginning to look like it is enabled or disabled at the app level according to the Firefox fix.
View 4 Replies
View Related
Sep 23, 2010
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
View 3 Replies
View Related
Nov 14, 2010
I am unable to examine Apache httpd error log from YaST2 because the lines are too long; the browser just truncates them and thus it does not show any description. The only option is to save it. However, when I chose that option, YaST2 encourages me to save it in /tmp, and as soon as I do that, the log becomes accessible to every user!
View 5 Replies
View Related
Nov 6, 2010
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies
View Related
Jan 8, 2010
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
View 9 Replies
View Related
Jun 12, 2010
I have an external usb dial up modem. lsusb shows: Bus 001 Device 002: ID 2001:f10d D-Link Corp. [hex] Accent Communications Modem How do I set this up? It probably needs a driver, how do I check it, or better yet, can I get yast to tell me if it recognizes the modem or needs firmware? I know linux and dial up is like the seventh circle of hell. Just wondering if there was a snowball's chances of getting this working. Sorry if this is the wrong section to ask in. Seemed like as good as any when I checked.
View 9 Replies
View Related
May 1, 2011
I can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card
BCM4322
When I enter /sbin/lspci -nnk
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
[Code]....
View 4 Replies
View Related
Mar 26, 2010
So the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
View 9 Replies
View Related
Oct 16, 2010
i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
View 1 Replies
View Related
May 23, 2011
the following message appears after I enter the root password.
/usr/lib/YaST2/bin/y2controlcenter: symbol lookup error: /usr/lib/YaST2/bin/y2controlcenter: undefined symbol: _ZN9QListData11detach_growEPii
It doesn't launch from the root console, either. But, the text-based YaST works fine. I assume that something went wrong after my last system update. which package I need to downgrade, to get things working, again?
View 1 Replies
View Related
Feb 24, 2010
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
View 2 Replies
View Related
Mar 23, 2011
I'm using openSUSE 11.4 64bit (KDE). I enabled Index of /source/distribution/11.4/repo/oss repository through YaST2 but it is empty and I can't see any source rpm file in YaST2. I even delete that repository and add it again but still empty. I open the link in firefox and it's not empty or invalid link.
Code:
# zypper lr -d .....
View 3 Replies
View Related
Apr 4, 2011
For the past several days I have been getting a notice to update but then when I try to, get the following notice of a dependency problem:
I am running 11.4_64 with KDE 4.6.1 update. How do I clear this?
View 9 Replies
View Related
Apr 26, 2011
Is there a way to know the size of a package in YaST2?I only have 50MB left in my root partition / (Btw, my /home is in a separate partition.) and I'm looking for a way to selectively delete package depending on it's size. Also, when we "remove" a package in YaST2, is it "completely" removed? or is there some residual rpm left? (of course /home/configs would be kept as it is an expected behavior).
View 5 Replies
View Related
Aug 22, 2011
11.4-KDE4.6.5 32bit install,,,perhaps it is the normal way now, but it was new to me: Opened Yast2 Partitioner module, and attempted to set up an extended partition on space unallocated of sdb. Went thru the steps to create and hit finish, immediately i get a kdesu authorization dialog and yast2 Partitioner disappears/crashes. entry in var/log/messages:
Aug 22 09:08:25 blkdragon polkitd(authority=local): Operator of unix-session:/org/freedesktopConsoleKit/Session3 FAILED to authenticate to gain authorization for action org.freedesktop.udisks.filesystem-mount-system-internal for system-bus-name::1.38 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:blkdragon) so, does this mean I have to set up udisks/polkit rules for using the Partitioner? Yast2 was not considered in the default polkit rules for the install?
View 2 Replies
View Related
Feb 8, 2010
When I start yast2 it seems to hang at around 50% (the lower progress bar) while refreshing the repositories. It can sit there for a minute before moving on. Once yast2 has started and I add / remove repos the refresh happens very quickly. It's only when starting that it gets stuck.
This is something that really only started after I upgraded to 11.2. In 11.1 the progress bar would move cross quickly and you could see the various repos flashing up above the progress bar. I didn't bother with it too much but it's starting to annoy me now. It also sometimes just hangs there permanently and I have to abort it.
I've tried unconditionally updating the yast stuff but it hasn't helped. My network connection is fine and I have now problems or speed issues with browsing the repo urls from a browser.
View 9 Replies
View Related
Oct 6, 2010
I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
View 9 Replies
View Related
Nov 20, 2010
I'm using the yast2 gui interface to configure apache. I think its called yast2_http_server. I added one website with *:80 set as the virtualhost ID. When I go to add a second website with the same thing, it errors out with: The IP address is already configured on another virtual host: *:80/mydomain.com. I have another opensuse box with many websites in apache configured this way.
View 1 Replies
View Related
Mar 5, 2011
if I open Yast2 via SSH I see the garbage (code page related issue; similar to this). If I set some other than UTF-8 in PuTTY (KOI8-U, iso-8859 etc) Yast looks good, but then the same problem appears with Midnight Commander. How can I have Yast to use 'right' UTF-8 instead of any legacy code pages? Or how better deal with the situation?
View 2 Replies
View Related
Jul 3, 2011
I'm trying to get yast2 to default to the QT interface. I have used these instructions but each time I run yast from the KDE launcher it still uses the GTK interface. I have also checked that the Yast2-qt package is installed. And have rebooted after setting it up, but it has still not worked.
I know it can work as if I run in konsole /sbin/yast2 it uses the correct interface?
View 9 Replies
View Related
Jul 3, 2011
Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.
So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.
View 9 Replies
View Related
Aug 7, 2011
I have a problem with the runlevel editor. It hangs at 28 per cent when initialising the runlevels. (Process: y2base runlevel qt). It used to work fine, probably until.I installed an update recommended by yast, including a new kernel. I did not immediately reboot after installing the new kernel but used the runlevel editor, which has hung since then.I've tried a reboot without success.Does anyone know what I could do to get this running again?
View 7 Replies
View Related
Dec 5, 2009
I have problems with running Yast2 under Gnome when I connect via VNC to the computer. The first 20-30 times it worked, but then it simply stopped to work. When switching to another VNC-Server (instead of :1 to :2) it works again for approx. 20-30 times. The behaviour is very much similar to the one described here:
Yast2 startet nicht unter VNC (SUSE 11.1/Gnome)
I use OpenSUSE 11.2 with german language set. The VNC server I use the one that is installed "by default".
When I try to run Yast2 from a terminal under Gnome as normal user I get the following output:
./yast2: Zeile 30: ./lib/YaST2/bin/yast2-funcs: Datei oder Verzeichnis nicht gefunden
./yast2: Zeile 267: set_lang_from_sysconfig: Kommando nicht gefunden.
./yast2: Zeile 192: check_qt: Kommando nicht gefunden.
Qt GUI wanted but not found, failing back to ncurses.
[Code]....
View 4 Replies
View Related
Sep 14, 2010
11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?
View 1 Replies
View Related
Mar 4, 2010
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
View 2 Replies
View Related
Apr 6, 2010
how can I set it don't close automatically? I want it just stay there, and let me close it manully.
View 9 Replies
View Related
