I'm trying to use LDAP with TLS but allways got Connect error. The message error is TLS : hostname does not match CN in peer certificate So I've tried to generate new certificate with my hostname for CN but my LDAP still don't want to work with TLS.
I use opensus 11.3. I used YAST2 for crating my CA and certificates.
I am using Ubuntu 10.4 LTS and Samba3.4.7.I have read a lot of posts and different web pages on setting up Samba on a Peer-to-Peer network with Windows XP but just cant make it work. I can see the Guest account in XP My Network Places but cant access the folder when I click on it.Network not accessible or you dont have permission. I can PING both ways ok. I have Firestarter turned OFF and I dont have any third party firewall on XP.
This is my samba config file:
[global]
netbios name = dolphin
server string = Ubuntu
workgroup = WATERLILLY - same as XP
[code]....
My organization just moved to using a zscaler proxy system. Basically, I have to use a .pac file in Firefox to get onto the proxy, which directs me to a series of two Flash pages, one to input my username, one for the password. After reading through the .pac file, I was able to get some command-line things to work by specifying the proxy given at the end. However, this server uses an SSL certificate that is not emitted by an authority, but rather directly by our organization. In Firefox, I had to import this certificate to enable https:// browsing.
Is there any way to "import" this certificate so that yum can use it? Because yum freezes with the error:
Code:
Could not get metalink [URL] error was
14: Peer cert cannot be verified or peer cert invalid
I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:
10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0
As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.
I install debian, I when I restart apache2, I got this error
[warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Thu Feb 26 11:53:45 2015] [warn] RSA server certificate CommonName (CN) `Ismo' does NOT match server name!?
How can I modify the commonName of the RSA server certificate?
But I don't think my peer is dead.
View 1 Replies View RelatedI setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
When I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:
"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"
In my httpd log I always get this recurring error
[notice] Digest: generating secret for digest authentication ...
[notice] Digest: done
[warn] RSA server certificate CommonName (CN) `srvspam' does NOT match server name!?
Where do I get Frostwire to install? None of the repos I have have it.
What are other popular peer to peer programs?
How do you change the hostname in SLES11? I have normally used the /etc/hostname file and rebooted the server in other distros. I only notice the way to change it is in yast2 -> network devices -> network settings -> Hostnames. I am looking for where it is stored because I want to write a script to update it (apart of a server deployment process).
View 9 Replies View RelatedI cannot uncheck the "Change Hostname via DHCP" box because it is disabled. Next to it says "No interface with dhcp". How can I fix it? I'm using OpenSUSE 11.3/KDE4
View 3 Replies View RelatedI've a little trouble: I reinstalled on my notebook OpenSUSE 11.3 yesterday and I'm unable to change the hostname. I modified it, but when I type on terminal
Code:
uname -a
it doesn't give the right answer but returns
Code:
host
I don't know where I wrong because I did this action many times with Opensuse 11.1 and 11.3 without any problem.
I know I'm missing something absolutely basic here but when I search the forums for filesharing I only seem to get info referring to Windows filesharing/SAMBA etc.
We have 3 Ubuntu machines at home and a printer on a Windows machine. How can we best fileshare:
1) between Ubuntu machines
2) reliably between Ubuntu and the Windows machine
Printing across the network is ok except for the Karmic NBR machines but that's another thread.
Just completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.
View 5 Replies View RelatedWhen browsing in WinXP Windows Explorer to view an OpenSUSE computer, the displayed name is:
Samba 3.5.4-5.3.1-2489-SUSE-SL11.3 (*hostname*)
Other Windows computers display as:
[computer description]([hostname])
How can I change the "computer description" within OpenSUSE?
I went into Yast and disabled the SYSLOG service, ignoring the warning of which services would be affected, I went ahead anyway and stopped it. Sure enough, a handful of other services stopped as well.Now I have almost recovered the PC from this foolish mistake of mine, the only problem I seem to be stuck with is I am now unable to locate the computer on my LAN by hostname ... does anyone know which service I should restart please (if it helps, the computer can resolve DNS names such as Google.com OK)?
View 3 Replies View RelatedAnyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
I installed openSUSE on my notebook with an usb drive using openSUSE 11.4 KDE LIVE iso. The installation process set the name to "linux-ygrl" which I don't really like. (I probably just missed the setting during the installation.). I tried to change it through YaST -> Network -> Hostnames and I set everything where needed to the new name and restarted but the changed weren't applied. I searched the web and found out about the /etc/HOSTNAME file which still contains "linux-ygrl". Now I could change it manually but I was wondering if there is a GUI for it? (I mean, openSUSE has for alsmost everything a GUI.
View 9 Replies View Related.site gets appended to the end of the hostname every system bootup for me (e.g. hostname.site), even though I've changed the hostname in both the Network Settings and Hostnames sections of YaST. How can I stop this?
View 7 Replies View RelatedI've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies View RelatedHow do I set $HOSTNAME to dynamically update with the hostname that is specified for the ip in DNS?
View 3 Replies View RelatedI have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
The collage I am going to has a secure wireless net work that we are suppose to be able to log into with a user name and password they give us. They have instructions on how to connect with windows and mac, but not for linux.There tech support has not been any help and I have tried quit a few different combinations but with no luck.
According to their instructions for windows their net work uses WPA-Enterprise for security type, and PEAP. They do not seem to use any root certification authorities, and they have you unchecked "validate server certificate".At [URL]there is some similar thing were you can see screen shots, but I cannot follow these because I do not know what "CA Certificate" to use. Is there a way to do it with out a "CA Certificate"?
I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
View 1 Replies View RelatedI have the following query:
Code:
$sql="SELECT table1.datetime, table1.user_id, table2.ip, FROM table1,table2 WHERE id='$id' AND (table1.id = table2.id AND table1.datetime = table2.datetime)";
In table2 the datetime fields are about 1 to 2 seconds off due to the source of the data, which I cannot change.
Is it possible via a query match table1.datetime & table2.datetime by HH:MM (ie. to the minute instead of to the second)?
can any tell me how can I configure OpenSuse for login session (kde/gnome) using a certificate in a SmartCart (spanish DNIe).
View 5 Replies View RelatedI have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies View RelatedI'm having an issue on two Fedora Core 13 machines where I can ping others by hostname, but the hostname resolution fails whenever I use ssh/scp/vnc/etc. I can still do these things by IP address, just not by hostname. RHEL5.3 machines on the same network with the same configuration do not seem to have this problem.
Here's the not-so-quick-and-dirty description of the situation:
I know that there is a virtual router at 192.168.31.1 and another at 192.168.30.1. I also know that there is another network (let's call it 90.90.90.0) and on that network lies a number of resources. By nature of this configuration, any machine on 90.90.90.0 can be accessed by any 192.168.x.x, but not the other way around. Beyond that is out of my hands and currently out of my scope of knowledge.
I have a dnsmasq server on 90.90.90.10 that operates as a secondary nameserver, another machine out of my sphere of influence is the primary nameserver (90.90.90.31).
The secondary nameserver on 90.90.90.10 holds the hostnames of our development machines. The problem is that in some cases, while I can ping by hostname all day long, services such as ssh, scp, vncviewer, etc all fail to resolve the hostname. In other cases I can do all of these things.
Every machine has an equivalent resolv.conf:
As an example, I will show the output of a handful of my development machines:
I also included columbia as a one-way test -- even though it cannot access 30.x or 31.x, they can access it:
columbia -- physical machine, Red Hat Enterprise 5.3, IP 192.168.100.200
Okay, so here are the various outputs. Remember, nibbler, discovery, and atlantis can ALL:
- Ping by IP address
- Ping by hostname
- ssh, scp, vnc, etc by IP addess
Additionally, the SERVFAIL reply from 90.90.90.31 is expected since my dnsmasq server is on the secondary server.
Note that the only machine that can both ping and ssh/scp/etc by hostname is nibbler, which also happens to be the only one of the three running RHEL5.3 instead of FC13. Other virtual and physical machines running on the 192.168.31.0 and 192.168.30.0 networks (all running RHEL5.3) work just like nibbler does. So the problem seems to only affect machines running FC13.
Final note: selinux is disabled, iptables is disabled, ip6tables is disabled.
Other than that, discovery is a brand-spanking-new install straight off of the FC13 DVD. atlantis has been around longer, but its just a file server so I haven't done anything too crazy to it.
First off I should say that I am a total Linux and Networking Noob. I have used Windows all my life, but I am now trying to get into linux so I have set up an old PC with Fedora.
Currently I only have the Linux Box and a Windows 7 Box and they are both connected to my broadband router. I have set them up with static IP addresses in the router and they can both ping each other by IP address but not hostname. I would like to be able to use hostnames to access each box (e.g. for SSH access and File Sharing). My question is basically how can I do this, what are the options and which is recommended for a small home network?
So far I have been able to set up the linux box to be able to ping the Windows box by hostname by editing the hosts file. Is this the right thing to do? Should I just do this on the Windows box too?