OpenSUSE Network :: RaLink RT2561 / RT61 Working In LiveCD Not In Actual HDD Install
Aug 2, 2010
I am and Ubuntu user, and recently became interested in KDE 4, since it obviously looks much more modern that GNOME. I tried Kubuntu, but didn't really like it that much, so I downloaded openSUSE 11.3 and installed it on an old 40 GB IDE hard drive, leaving my existing Windows/Ubuntu HD untouched. The only problem is the Wi-Fi doesn't work, although it did work on the liveCD. Issuing the command gives the Wi-Fi card as being a RaLink RT2561/RT61. Does anyone know how to fix this? I really hope I can get this fixed, as I've heard some great things about openSUSE KDE, and would love to make it my primary OS, completely dumping Ubuntu. I'm using the 64-bit CD.
View 7 Replies
ADVERTISEMENT
Sep 5, 2010
Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.
The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.
A screen grab is attached.
I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04
PS. I have no networking on the system but I can transfer files via USB flash drives if needed.
Some System info:
Code:
1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650
2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI
3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code].....
View 1 Replies
View Related
Apr 26, 2010
About a year ago I had a different computer with this same wireless card (edimax EW-7128g) and it was recognized immediately after I installed ubuntu 8.10. I found this hardware compatibility page, and it says it is compatible, at least on 9.04.
After reading this old guide I found:[URL].. I downloaded the latest driver, and followed the instructions (i had to refer to the readme too, some things were slightly different which I'm assuming is because it's the 2010 driver not the version referred to in that tutorial) up until:
(e) copy the rt61.ko driver file to the modules directory then load it
Code:
$ sudo cp rt61.ko /lib/modules/`uname -r`/kernel/drivers/net/.
$ sudo depmod
$ sudo modprobe rt61
I don't see where rt61.ko is.I've got the information for my wireless connection edited into /etc/Wireless/RT61STA/ rt61sta.dat iwconfig shows pretty much default stuff, no mention of my wireless card or any type of connection, though the card does show up at the bottom of the lspci query. I added the wireless connection information into the "Network Connections" prompt in the preferences, but obviously that's not accomplished much of anything for obvious reasons. Should I just install 9.04? Judging from this account, getting this wireless card to work would be a hell of a lot easier.
View 3 Replies
View Related
Sep 13, 2010
I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.
Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree
[Code]...
View 9 Replies
View Related
Mar 23, 2009
I have just purchased an Edimax EW-7128g with Ralink RT61 chip and physically installed it in a system running CentOS 5.2. Trying to follow the installation instructions, I get the following:
[root@webtest Module]# make all
make -C /lib/modules/2.6.18-92.el5/build SUBDIRS=/root/drivers/2007_1210_RT61_Linux_STA_v1.1.2.0/Module modules
make: *** /lib/modules/2.6.18-92.el5/build: No such file or directory. Stop.
make: *** [all] Error 2
The problem is that although /lib/modules/2.6.18-92.el5/build exists, it appears to be a link:
[root@webtest Module]# ls -l /lib/modules/2.6.18-92.el5/build
lrwxrwxrwx 1 root root 43 Mar 23 15:34 /lib/modules/2.6.18-92.el5/build -> ../../../usr/src/kernels/2.6.18-92.el5-i686
View 7 Replies
View Related
Jan 22, 2010
I recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
View 9 Replies
View Related
Aug 10, 2010
Desktop PC with Trendnet TEW-642 PCI wireless N adapter (Ralink 2860 STA driver). Running openSUSE 11.3 X8_64 with KDE 4.4.4. Software Management and KNetwork Manager both identified rt2860STA as installed. However, KNetwork Manager's authentication window keeps popping up every few seconds and I cannot get wireless.
1) uname -r:
Code:
2.6.34-12-desktop
2) /sbin/lspci -nnk:
Code:
03:06.0 Network controller [0280]: RaLink RT2800 802.11n PCI [1814:0601]
Subsystem: RaLink Device [1814:2860]
Kernel driver in use: rt2860
3) dmesg:
Code:
[ 6.270671] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.275290] alloc irq_desc for 21 on node 0
[ 6.275294] alloc kstat_irqs on node 0
[code].....
I have downloaded and extracted the latest rt2860.bin file from the Ralinktech website to Desktop but even as root I cannot copy it to /lib/firmware or replace the existing rt2860.bin file in /lib/firmware.
View 9 Replies
View Related
Sep 15, 2010
Running XBMC (based off Ubuntu 9.10) and trying to get a RT2561-based card to connect to my wireless router.
From my understanding, this card should work right out of the box.
The driver is loaded, the card sees the router and the router can see the card, but the card can't/won't connect to the router.
Router is running DD-WRT, with no encryption (yet) or any type of MAC filtering and physically sits about 8' away from the XBMC machine.
Requested info:
lspci
Code:
00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
[Code].....
View 1 Replies
View Related
Nov 22, 2009
I have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:
After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.
It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s
View 1 Replies
View Related
Dec 28, 2010
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies
View Related
Aug 23, 2010
I have openSUSE 11.2 (m8) Gnome LiveCD installed in my VirtualBox and now i want to move the schema to server side. I know, this is not normal, but it's fun - 'Have a lot of fun!', that is what i do in my study time.
So, how can i remove the packages useless for servers in a simple mode? My first idea uses category GROUP of a package, but this not work.
I can, for example, see the packages on System/Daemons, ok, but i can't see a list of groups inside System/ in a easy way.
And /usr/share/doc/rpm/GROUPS it's not full.
View 1 Replies
View Related
Nov 25, 2010
When I run Kubuntu on livecd everything works perfectly, I just click on systray icon, select my network, enter wpa pass and it's all setup! But after I installed Kubuntu on HDD it doesn't work like that anymore. [URL] Version 10.10. Maverick Meerkat
View 9 Replies
View Related
Aug 28, 2011
I've been in doubt weather to install Linux open SUSE or Mint on my Dell inspiron 1501 laptop. Having tried the latest SUSE live CD (not finding a way to use WiFi) I decided to install Mint (Katya release). Now it turns out there's a bug on Ubuntu/debian related linux distros in connection with Dell Laptops, specifically on WiFi cards by Broadcom. (If you want to know more, check this Ubuntu forum thread and my comment on it.) My question is: are there any known bugs on Dell with OpenSUSE? An additional question would be: is it at all possible to use WiFi with the latest SUSE live CD?
View 4 Replies
View Related
May 31, 2011
I seem to have a knack for having systems built that OpenSuse doesn't like. I remembered this afternoon why I gave up on 11.x - the 11.4 LiveCD doesn't like my setup, at least in terms of booting into a GUI. I have uploaded two photos I took of the bootup screen, in case the provide information that might be helpful. I am sorry about the shakiness, I have CP and the the 2nd one is harder to read because of that, but it says something about "amd radeon hd 6800 series (chip ID 0x6738) requires KMS" among other things.
Even though I'm really rusty in CLI, I'm happy to give it a go, to get this working, if possible. The two screenshots are [URL]
FWIW, the 11.4 LiveCD also really didn't like the NVIDIA GeForce 7000M / nForce 610M in my old Acer Aspire 5520 either.
View 9 Replies
View Related
May 4, 2010
I formatted my old laptop's HDD completely to install openSUSE with a clean slate plus it couldn't handle XP anymore. I burnt a liveCD and NET CD but none of them boot (not at all) and since its my first experience with Linux I am puzzled. I get this message that operating system could not found (well there is none) and it suppose to boot from the CD I triple checked the boot priority I burnt extra CD's but nothing seem to work.
View 9 Replies
View Related
Sep 15, 2009
I am trying to make a liveUSB(my DVD drive run out monthes ago), I use this iso image: openSUSE-11.1-KDE4-Reloaded-LiveCD.x86_64-4.3.1-Build4.1.iso I just cp the file in the iso into the usb, and cp the L : ootx86_64loader*.* into my usb, mv the isolinux.cfg into syslinux and run with syslinux command to install the bootloader. and boot with my usb drive,get Error: .. Loading device nodes with udev Boot logging started on.
... No devices matches MBR identifier: 0x5b265f15 reboot Exception: error console at Alt - F3/F4 ...
View 7 Replies
View Related
Jun 20, 2010
I've decided to try openSUSE again, but I'm having trouble with the LiveCD. I've tried both "linux" and "root" which has been mentioned in many places but neither works.
View 7 Replies
View Related
Aug 5, 2010
I've installed OpenSUSE with both DVD and liveCD. When I'm in Open SUSE booted from the CD/DVD, my wireless usb is recognized and I can connect to the network using the icon at the bottom right bar. When I install Open SUSE to my hard drive, my wireless usb seems not to be recognized and I'm not offered to connect to a wireless network.
View 3 Replies
View Related
Sep 6, 2010
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890
View 9 Replies
View Related
Jan 26, 2011
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
View 9 Replies
View Related
Aug 17, 2011
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
View 1 Replies
View Related
Feb 23, 2011
i have a doubt about NS3, can use the actual network card of my computer in the simulator NS3, that is, if my network card can behave as programmed into the simulator.
View 2 Replies
View Related
Feb 7, 2010
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
View 5 Replies
View Related
May 15, 2010
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
View 1 Replies
View Related
Oct 16, 2010
openSUSE-11.3-Addon-Lang-i586.iso and openSUSE-11.3-GNOME-LiveCD-i686.iso
Index of /distribution/11.3/iso
And what is openSUSE-11.3-Addon-NonOss-BiArch-i586-x86_64.iso ?
View 1 Replies
View Related
May 14, 2011
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
View 5 Replies
View Related
Feb 1, 2011
I've followed these instructions exactly but when I get here: Quote: Reboot and you should see an ra0 interface when you run the command 'ifconfig'
[Code]...
View 9 Replies
View Related
May 16, 2011
i am trying to get skylink 802.1n usb wirless adapter working under ubuntu 10.4 lts.https://help.ubuntu.com/community/WifiDocs/WiFiHowTowell, it seemed to see something at first:
user@host:~$ lshw -C network
WARNING: you should run this program as super-user.
...
[code]....
View 2 Replies
View Related
Mar 30, 2009
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears:
ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Loading
Invalid or corrupt kernel image.
boot:
View 7 Replies
View Related
Nov 17, 2010
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
View 9 Replies
View Related
