OpenSUSE Network :: Can't See Local Webpage On Microsoft IIS?
Nov 6, 2010
I am running SUSE Linux 11.2 on my main internet mail machine here and I really like it. Everything seems to be working fine.On another machine here, I am running Windoze 2000 Pro (don't laugh) as a home server and I can access the library drive I set up there there just fine through Samba which I set up on the Linux machine.Also on the server, I am running Microsoft IIS (Personal Web Manager) and have a house home web page set up that anyone can see from any other machine on the network (all Windoze machines, using IE if that makes a difference) by typing:and the house home webpage I've set up shows up in that browser, but not on the Linux machine? Linux (Firefox) takes me to www.server.com which is a GoDaddy website.I don't know how to start figuring out why I don't see this home page in Linux.
View 9 Replies
ADVERTISEMENT
Jan 2, 2010
I just installed OpenSuse 11.2 and I can't see any webpages. I can contact my modem, and if I type 66.102.7.99 in Firefox it gets me to the google webpage, however if I type google.com it says that it can't find the server.
Right now I'm connected using OpenSuse 10.3 that I had in a different partition. I'm trying to replicate the settings from 10.3 to 11.2 but to no aval.
this as is really hard to be without a proper internet connection
View 4 Replies
View Related
Dec 31, 2009
Have searched and not found much to show/tell me how to go about sending video to a web. The code for the page and the way to tell the camera to send or ftp or ...?
View 2 Replies
View Related
Mar 7, 2010
I have tried to set up the desktop version of the server . In my apache2.conf file I have changed the following lines-
Code:
# Include the virtual host configurations:
#Include /etc/apache2/sites-enabled/
Include /home/www/websites/
Yes I do keep the default values commented out
In my virtual host file I have made the following changes to the DocumentRoot, and to one of the <Directory>; the rest of the file doesn't appear here as nothing was changed.
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
# DocumentRoot /var/www
[Code]....
View 7 Replies
View Related
Aug 29, 2010
I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies
View Related
Jan 13, 2010
Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies
View Related
Mar 9, 2010
I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!
This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.
View 4 Replies
View Related
Feb 2, 2011
We are experiencing a rather odd issue with SSH access to our opensuse linux server. When accessing it via SSH on the local network everything works fine and there are no issues. However, when accessing it via SSH from an external location it hangs randomly. We can log in without issue and some commands seem to work ok. If we attempt to run a command such as "top" the SSH session simply hangs permanently. using "strace" the process hangs at different points so it is not a particular part of it's execution that appears to be the problem.
View 1 Replies
View Related
Jul 14, 2010
How do you get linux to resolve local hostnames without DNS?
I've recently migrated from a fully windows home network, to a few linux machines and im unable to ping any local machines with hostname via these linux machines. i can ping IP and internet hostnames. also, windows > anything pings ok too. however linux > anything will not ping via hostname.
I beleive it's an additional service running on windows to resolve hostnames without DNS (wins/netbios).
DNS is done via a netgear DG834 router (DNS forwarding).
I know i could either use direct IP, or add machines into the hosts file, but im wondering if theres some way around that and to have it dynamically update like it does on the windows machines. static mappings seem a bit silly inside DHCP zones
I've seen some reports of avahi causing local network issues (taking over the .local domain), but i think this only extends to having to manually enter in .local after the hostname and even after removing avahi, the problem is still present.
View 9 Replies
View Related
Apr 3, 2010
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
View 9 Replies
View Related
Feb 18, 2010
how I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).
View 8 Replies
View Related
Feb 5, 2011
I'm running OpenSuse 11.3 X64. I have installed apache2, PHP5 and MySQL in order to do some web-design offline e.g. they are for internal network use only. There is also phpMyAdmin installed. The default directory for the "server" is /srv/www/htdocs.
To access a specific site in progress I create a subfolder there then just navigate via h**p://10.13.23.201/NAMEOFFOLDER from my internal network. At least that is how it should work but it doesn't. I created a new folder called wlc so it's directory is /srv/www/htdocs/wlc however when I go to the address h**p://10.13.23.201/wlc I get a Remote Server Or File Not Found error from my browser, there is files in there ,index.php, that should load and apache has been set to recognize *.php files.
I know the theory should work as I can access /srv/www/htdocs/phpMyAdmin by going to h**p://10.13.23.201/phpMyAdmin and it loads just fine. Also the error is different if I go to a folder that doesn't exist for example h**p://10.13.23.201/THISFOLERDOESNTEXISIT will return an Object Not Found error.
View 4 Replies
View Related
Aug 11, 2011
loss password to network. when trying to login to a local Server it tries to Authenticate from the network. Can anyone tell me how to change it back to a local Authentication or to reset network password.
View 2 Replies
View Related
May 16, 2010
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies
View Related
Jun 28, 2011
I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies
View Related
Jun 4, 2011
Should I be able to transfer files between computers wired to the same router? Is the router bridging function used to transfer data between wired computers? I just got DSL and I'm new to networking. I have openSuse 11.4 on two computers plugged into a Belkin router. The internet connection to my ISP works from either computer. If I ping $HOSTNAME from either computer, the hostnames are different, but the IP address is the same which is that of my ISP. I only have the one router, but it has a bridging option. I don't know if it can do both bridging and routing simultaneously.
View 9 Replies
View Related
Jul 18, 2011
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
View 2 Replies
View Related
Jul 25, 2011
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies
View Related
Jun 12, 2011
build a cluster within local network based on opensuse and fedora?
View 2 Replies
View Related
Jan 29, 2011
I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies
View Related
May 25, 2010
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
View 6 Replies
View Related
Apr 7, 2011
I am looking for a way to set a default for new users for the akonadi mysql.conf file that is created for each user for the akonadi database. Usually this file contains a inno_db_log_file_size of 64MB. Because of this the database eats up 64MB storage even if its still empty. I would like to decrease this size globally for each "new" user since we have very tight storage restrictions on our NFS home directories now. And 64MB make up already have the quota each user has. So this is to much. where is this default mysql.conf file taken from?
I found hints that there used to be a /usr/share/config/akonadi/mysql-global.conf file that was simply copied but I cannot find such a file on my 11.4 system. It seems things have changed. how akonadis user specific mysql.conf file in ~/.local/share/akonadi/ is generated for a new user? How can I use my own template file here?
View 2 Replies
View Related
May 30, 2011
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
View 4 Replies
View Related
May 31, 2010
I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
View 2 Replies
View Related
Jul 2, 2011
I have setup a nis server and client. At first I didn't have a local user defined on the client. The client then used the user and passwords from NIS, so that was ok.
The problem then is, that when the server is down, I couldn't login to my client anymore. So I created a local user with the same name on the client but with a different password (after I shut the nis server down, if nis server was on, I couldn't create a local user with the same name). I then edited etc/nssswitch.conf as follows:
Code:
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Legal entries are:
#
# compat Use compatibility setup
[Code].....
If NIS server is on: client has to login with the nis password If NIS server is down: client has to login with the local password (as fallback)
However the actual behaviour is that I can only login with the local password now. The NIS pasword doesn't seem to be used anymore.
View 3 Replies
View Related
Jan 29, 2011
Yhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
View 4 Replies
View Related
Jan 23, 2011
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
When I click on a PDF file from a webpage, it opens it with GIMP, seems rather excessive to me. How do I open the file with Okular. I haven't been able to Google this as I am not sure what it is called. Is this 'file association' or 'application association'?
View 3 Replies
View Related
Mar 31, 2009
I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
View 6 Replies
View Related
Jun 7, 2011
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
View 6 Replies
View Related
Aug 17, 2010
Reading local pdf files with okular.
However, when I visited this site [IMG=http://img185.imageshack.us/img185/4708/snapshot1u.png][/IMG](consisting of a pdf file), I am unable to view the site.
Only, upon installing acroread, the site/file is then visible.
Note that BEFORE installing acroread, the site can be viewed with konqueror. [IMG=http://img718.imageshack.us/img718/1353/snapshot2hh.png][/IMG]
How can Firefox be configured to view the site without installing acroread?
View 4 Replies
View Related
