I have a problem with my opensuse, i can't launch amarok it missing a dependence
When i launch it since a terminal i have this message :
xxxxxx@linux-portable:~> amarok amarok: error while loading shared libraries: libknewstuff3.so.4: cannot open shared object file: No such file or directory
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies View RelatedSalutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies View RelatedWhy do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
drwxr-xr-x 2 jimt users 4.0K Jun 22 22:00 .gstreamer-0.10
-rw-r--r-- 1 jimt users 132 Jun 24 11:50 .gtk-bookmarks
d????????? ? ? ? ? ? .gvfs
-rw------- 1 jimt users 4.3K Jun 24 11:50 .ICEauthority
drwxr-xr-x 3 jimt users 4.0K Jun 23 08:41 .icedteaplugin
i read through and spent an hour trying to fix my maudio mobile prei tried uninstalling and reinstalling alsa. i tried getting a new updated also from their site and installing it.and no luck. put the error message i got from trying to run alsamixer in the title.i dont know why it says that there are no alsa drivers when ive tried to install them 2 different ways
View 1 Replies View Related% apt-file search bin/ooffice
openoffice.org-common: /usr/bin/ooffice
% apt-cache policy openoffice.org-common
openoffice.org-common:
Installed: 1:3.3.0-6
Candidate: 1:3.3.0-6
Version table:
*** 1:3.3.0-6 0
500 ftp://ftp.us.debian.org/debian/ sid/main amd64 Packages
100 /var/lib/dpkg/status
1:3.2.1-11+squeeze2 0
500 ftp://ftp.us.debian.org/debian/ wheezy/main amd64 Packages
% /usr/bin/ooffice
zsh: no such file or directory: /usr/bin/ooffice
I want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View RelatedOpensuse 11.2 x86-64
python-numpy 1.3.0-22.1
python-numpy-devel 1.3.0-22.1
The Numerical Python (numpy) is installed.
Numeric/arrayobject.h:No such file or directory
I have been trying to start the multipathd service but it does not start.
My configuration looks as follows.
The problem is that i cannot start the multipathd service.
The devices get created just fine but neither can i run multipathd -k
When I learn shell script, I want to add my own PATH variable to system previous variables. I find that my linux has the below PATH variables (in the end of this message). It shows 'No such file or directory' although I verify that all the directories exist. Some directories are empty indeed. This will result that warning?
I want to make the present PATH variables correct before I add mine.
bash: /usr/lib/mpi/gcc/openmpi/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin: No such file or directory
when i switch to init 3 i have an error message telling me that /root/.../.kde4/Autostart/rundbus has no such file or directory What is this file supposed to be ?
View 9 Replies View RelatedI've got a few large, unsorted folders where I dump mp3s. I manage it all through rhythmbox and I've decided to separate the wheat from the chaff by paring down stuff I don't want and throwing all the desirable stuff into a big (~1,800 file) playlist file saved to my desktop.My question to you is, is there a hack that'll let me cp all the file entries in this playlist from their various original directories and into one target directory? Playlist format is:
Quote:
[playlist]
X-GNOME-Title=Biglist
NumberOfEntries=1823[code].....
I have a problem when booting my pc.I uninstaled bootchart and since then kernel goes to panic..saying /sbin/boot:no such file or directory..I followed the Repair Installed System from my dvd but it fails at the end and it just reboots the system..Is there any way to baypass this problem without reinstalling the OS?
View 9 Replies View RelatedIn a fresh install of 11.4 I see a file named "1" (the number "One") in the / (root) directory.
Code:
vodoo@host:/> ls -l 1
-rw-r--r-- 1 root root 0 May 31 11:29 1
Who creates this file and what is it good for?
Been trying to get nxserver running on 11.2 i386 at location A and keep getting an error on connecting from client at location B.
Code:
NX> 203 NXSSH running with pid: 6439
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[code].....
I'm attempting to install a WLAN card driver from source, as that's all that's available.I'm getting:
make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory
Build appears to be a link pointing to "/usr/src/linux-2.6.31.5-0.1-obj/x86_64/desktop"."linux-2.6.31.5-0.1-obj" doesn't exist.
I can access my NAS box with telnet but the file I am looking for is not in the expected directory. Of course I could go through all the directories using ls -a but that would take days. Is there a command I can run to look for the file for me using the telnet console?
View 3 Replies View RelatedI was trying to connect to wireless via cmd:
* ifconfig wlan0 up
* iwconfig wlan0 essid 'XXX'
* iwconfig wlan0 key XXXXXXX
* dhclient wlan0 -> here i get error:
ls: cannot access /var/run/netconfig//wlan0/: no such file or directory
My USB stick is this one: [URL] I can't get it to scan my frequencies. PC finds the stick (lsusb):
Code:
Bus 002 Device 005: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick When I plug it in, dmesg shows this:
Code:
[ 5680.696043] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 5680.834917] usb 2-2: configuration #1 chosen from 1 choice
[ 5680.849872] af9015: tuner id:179 not supported, please report!
[ 5680.852951] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[code]....
But if the directory is created, then after the same command I have
Code:
scanning /usr/share/dvb/dvb-t/lv-Riga
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device
I found on the internet a firmware for my USB HDTV DVB-T stick named "dvb-usb-af9015.fw" and copied it into /lib/firmware/ but I have not seen any difference with that.
I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-2.6.31.5-0.1-desktop /lib/modules/2.6.31.5-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug 2.6.31.14-0.1-desktop 2.6.31.5-0.1-desktop2.6.31.14-0.1-default 2.6.31.14-0.1-xen
I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
View 3 Replies View RelatedIt's my first Linux. (and the only one I could install. So I won't(can't) try with another version.)
I got these results.
And, I'm following this thread - Realtek RTL8191/8192SE WiFi Drivers.
I did : sudo zypper install automake make linux-kernel-headers kernel-desktop-devel kernel-syms // and now I have all the highest versions.
But I'm still getting this message..
So I use the following to rip audio from one .mp4 file and then generate one .mp3 file.
Code:
caleb@linux-vmp1:~> ffmpeg -i a -ab 128000 -ar 44100 01.mp3
Obviously, this takes a file named a and makes a file named 01 that is an mp3. It works great and I have used it many times. The problem is, I would like to rip the audio from several files all at once. I am sure there is a way to do it but I haven't stumbled upon the way to do it.
I've done a low level format on them so they're completely empty. When I use them with my windows machines, they're absolutely fine. When I plug them into my Ubuntu machine, there is a hidden directory created called 'RECYCLER' which I'm assuming is for deleted files?However, it also creates a .exe file in this directory called 0x2D9FA278 which has an Icon with an H in it and a comment of 'Facebook Photo' This has the effect of making all the directories on the stick into shortcuts! I googled the file name and it seems to be some sort of Trojan, but I don't understand how it's go into my Ubuntu machine, I've scanned with ClamAV and it finds nothing.
View 5 Replies View RelatedI downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies View RelatedI get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
I've run into a problem with my bash program.
Code:a mkdir -p /home/chris/Downloads/ARCHIVE/`date -I` find /home/chris/Downloads* -mtime +14 -exec "cp {} /home/chris/Downloads/ARCHIVE/`date -I` ;
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
After trying to unsuccessfully install OSS4, it seems I've broken ALSA and have no sound. I've uninstalled the oss4 packages and rebooted, and now alsamixer reports "cannot open mixer: no such file or directory". Here's the output of aplay -l: List of PLAYBACK Hardware Devices aplay: device_list:244: snd_ctl_pcm_next_device PulseAudio also doesn't find any hardware devices, though it is able to play to the Apple Airport Express down the hall. I'm running 10.04 64-bit on a Thinkpad X61.
View 1 Replies View Related