When i have a few windows open, a new window will open on the left side instead of the right after the previous windows. I'd to know how to have them open the standard way. I'd also like to know how prevent grouped windows of similar programs.
View 2 Replies
I generally use dolphin as a file manager under KDE 4.4.1.
This is set up as a split window. Now, whenever I open dolphin, the right hand window is the "active" one. How does one make the left window the active one by default?
I am using nx client and I would like to ask your help. Is it possible when I connect from home to my work's computer (using nx client) to see the exactly same desktop-taskbar and open programs as I left them in my work computer.
Imagine that you are at work using your computer. You lock the keyboard and you go home(you didn't turn it off). You go home and you login to work's computer. What I want to see is the same if I was just unlocking works's computer. IS that possible and how?
is there a way to have gnome open in the upper right or left corner instead of the lower left corner when i start it?
View 3 Replies View RelatedHow can i get the windows vfat partition at left side of dolphin? Windows vfat drives are mounted in /windows.Those are not displayed at the left side of dolphin.
View 6 Replies View RelatedI've had this for a while now and though I might as well do something about it.
When I have more than one or more windows open none of the show up on the taskbar, I'll show you what I mean.:
Although you can't see it from the picture, I actually have two windows open, both of which should show up on the taskbar (1.).
I can open windows by clicking on the button marked 2.
Is there something simple that I have missed?
I'm trying to find a way to make my Windows key the shortcut to opening my start panel in Lubuntu. I've found easy instructions for Ubuntu, but Lubuntu doesn't have the keyboard shortcuts utility that Ubuntu has (at least I can't find it).
I found some instructions for editing a config file but I can't find the command for opening the panel, and I've seen conflicting information about how the Windows key is written (some say W, some say Super_L), so I hesitate to start playing around with that file when I'm only guessing.
I've switched to Xubuntu and the procedure is obviously different How can I make my Windows key open the Applications Menu in Xubuntu?I found the keyboard shortcuts in the Settings menu but I see no option for adding a shortcut. It only shows the existing shortcuts.
View 4 Replies View RelatedI would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies View RelatedI have been using windowmaker for some time now. I really love this wm, but I've one major problem; how do I make certain windows open the same size each time I open that program? For instance, I have a certain size I prefer for Pcmanfm, Vlc, deadbeef, and geequie, but every time I run them, they open anywhere on the desktop at all sorts of sizes. I especially hate resizing a video window when the video is playing.
I can do this in fluxbox, but I have a different set of problems with that window manager, namely, I can't organize my dockapps the way I want, despite editing the slitlist and some won't work at all. While I love Openbox, I can't get the windows sized right each time, either.
I would like to be able to make the Yast package manager stay open after installing or removing packages.
View 9 Replies View Relatedi am using avant for some days. it is great and works very well. but it always appears on the bottom. i want to make it appear on the left/right side of the screen. is it possible?
View 5 Replies View RelatedIs it possible to map the same "Present Windows - All Desktops" action which is invoked by activating the top left corner of active screens via a keyboard shortcut? I basically want to ape OSX and have an expose-like button, the screen edge works fine for now, but I would love a keyboard shortcut also. Is it possible? Also, when I set up a custom keyboard shortcut to run yast, I initially tried using the same command from the KDE menu: /usr/bin/xdg-su -c /sbin/yast2
However, when I use the keyboard shortcut to launch this command, I get problems when trying to use zypper after the initial launch using the keyboard shortcut(from yast GUI or CLI). The error basically states another instance of yast2 already exists. The problem is only with the app/repo management modules though; for instance I can launch yast (using keyboard shortcut or start menu) and access hardware info, sudo users etc, I just can't access software/repo management stuff. Even when I kill the offending PID from the CLI I still get the error and have to restart the box to rectify it proper. So I changed the keyboard shortcut command to : /usr/bin/kdesu /sbin/yast2
and this seems to have resolved the problem. My second question is what is the difference between the two in this particular instance and why does one cause problems (xdg-su) and the other does not (kdesu).
[1st off...I used to host my music (A&R) website on a dedicated windows server...'cause I thought it was necessary for streaming .wma files. when I discovered it wasn't...I went w/ a standard hosting package, w/ GoDaddy...
BUT...
I moved my recording studio's site to it's own domain. [it used to be a series of pages on my A&R site.]
I now need to create a '301 Redirect' in my old site's directory to redirect surfers (who have my old url) to the new site...but more importantly...to retain my ranking w/ the major search engines...!
It cannot be done on a Windows server (which I'm on, w/ GoDaddy)...not an .htm redirect anyway, which I need. I've tried all the php, asp, etc. scripts...they don't work. [&...I don't think I really need windows features like php or asp...I code my site(s) in Dreamweaver as html pages.]
so...If I migrate my site(s) to a Linux server...
1) Will standard .wma streaming continue to work...? (i.e., a .wax file in the directory that points to the .wma).
2) Which type of server is FASTER for this task...(if any)...Linux or Windows...?
On my dual-boot system, 11.4 and win7, Iped out the Doc and DL folders in my home directory and replaced 'em with links to the ones on the windows side. It works great except for one thing: When I open Dolphin in superuser mode and change the permissions to make myself the owner of those folders, the change doesn't take. Is there a special trick to it?GEFPS: I plan to use openSUSE as my main OS, but it's easier to keep my data on the NTFS partition, because Linux speaksindows better than than Windows speaks Linux. Besides, that's where my data already lives
View 9 Replies View RelatedI have a webserver WWW1 and a front-facing proxy PRX. I use SSH ProxyCommand to connect to WWW1's internal IP (private IP) via PRX (private+public IP). For some connections (not all) I see a network connection left open after I'm finished. These add up!
~/.ssh/config
Host *
ServerAliveInterval 5
ControlMaster auto
[code]....
On PRX, lsof | grep WWW1:ssh shows 124 open connections at the moment. On WWW1, the same command shows 243 open connections. There are similar open connections for WWW2, WWW3 etc.
WWW1 and PRX are Debian. Client connections are coming from a mix of Debian, Ubuntu and OSX10.6. I use Emacs Tramp but this has no special configuration (AFAIK) outside of my ~/.ssh/config. I'm concerned about running out of internal ports, and ideally I want these connections to clean themselves up without intervention. Ideally by configuring them to kill themselves off; failing that a command I can kill old processes with is fine!
I am using Fedora 13 64bit. My eclipse program starts a server on port 9050 but I shutdown the program, eclipse fails to properly shutdown the server. Restarting eclipse has no effect.
How can I close or unbind a port forcibly from command line?
I know rebooting or log off and back on will clear the ports but this much slower process for me. I am looking for forcibly closing the port in command line.
I set up an exim4 server successfully and was able to send/receive mail! I fired off a couple emails to my friend and never got a response. Oh well, I thought, must be because my domain name might be considered spam.Flash forward to today and I get an email from the people who host my server, telling me that I have left my exim4 relay open. Looking through some of my users' email, I see a series of messages with the subject 'Message frozen':
Code:
Message 1QCCQJ-0004FP-OY has been frozen (delivery error message).
The sender is <>.
[code]....
GNU/Linux kernel 2.6.
MS windows xp.
I was burning a DVD+R DL when a read error happened and the burner program stopped execution. Now, when I ask for the disk status it says: 'disk status: open, not finalized' (Nero 7 under ms win xp). Besides this, I have at my disposal Cdrecord-ProDVD-Clone 2.01 and K3b 1.0.2 under KDE 3.5.7.
I got opensuse11.3 with KDE desktop. After installation everything was ok, but all of a sudden the right hand side of the taskbar (system tray) went in towards the left and I can't see the open windows in the task bar. I have gone through the panel settings and everything but the problem remains.
View 7 Replies View RelatedOpenSuse 11.2Firefox 3.6.6DownThemAll 1.1.1.0I am downloading Slackware 13.1 (32 bit) from Softpedia using the firefox Add-on, DownThemAll.My computer is not on a UPS, so if the electricity is off, how should I make sure after restarting the computer, the download continues from where it left rather than restarting the whole process again
View 14 Replies View RelatedOnce turned on and turned off the desktop effects was a change in the settings windows, always open windows in the maximum amount for all programs. How to Recover the initial setting?
View 5 Replies View RelatedIs there any good open source AutoCAD alternative that is used by (semi)-professionals or is AutoCAD the standard?
View 2 Replies View RelatedWhen I open a folder on the gnome desktop or within a subfolder everything seems to work fine. However, when I open a folder from the "places" menu on the top screen panel, it opens the folder in a different app (emacs). Is there a way to fix this behavior?
View 2 Replies View RelatedOpenSUSE 11.4 / kernel 2.6.37.1-1.2-desktop / Gnome 2.32.1
Video: Intel 945G (on motherboard)
Monitor: Acer AL1716 @ 1024x768
Driver: whatever 11.4 auto-installed for the card
Having a strange video problem after recently up-ing to 11.4. When new windows open maximized, they are opening at the wrong size (slightly too small) resulting in a distorted view including 'broken' fonts (missing pixels). If I unmaximize the new window, and then re-maximize it, it now maximizes to the correct size and everything is fine.
Not sure if this is the right sub-forum, but it seems close enough. As stated in the title, how does one go about this? I know Fedora supports this, and was wondering if there was a way to configure it in OpenSuse. I haven't found anything in the Control Center about this, or on the internet for that matter.
View 3 Replies View RelatedThe thread's title is very eloquent:I have a Windows 7 ISO image and I would like to "burn" it on a bootable USB pen in order to install it on a netbook.Obviously I am on openSUSE, and all I read so far was instructions to burn an opensuse or any linux distros (the "dd" tales)
View 2 Replies View RelatedWhen I have an Audio CD inside my computer in the desktop there is an icon called "Sound disk". When I left click on it Nautilus opens. I would like Rhythmbox to open instead.
I've tried to change in /etc/gnome/defaults.list :
But the problem is still here.
NB: I only need to click once on the icons of the files to open them (I changed the preference of Nautilus).
NB2: I have no problem with "Open with" in the context menu when right clicking.
NB3: I have no problem when I insert an Audio CD: Rhythmbox opens automatically because I selected that option.
I am running a week old 11.3 install with KDE (no desktop effects), compiz, nvidia. Last night I was working away. I had Thundertbird, Firefox, and VMWare Workstation open. Maybe something else, but I don't remember.
I was typing away. Maybe I hit something on the keyboard, but maybe not. All apps just disappeared, meaning that they're windows were not open and were not minimized to the panel. I could open *new* windows, and I fire up a terminal and ran top, which showed that they were all running, just not visible. Obviously, this is a Bad Thing.
I have installed virtualbox on opensuse 11.2 64bit.
When I go to open a machine it says
"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."
"
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
Interface:
[Code].....
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."
