OpenSUSE :: Kgpg Unable To Open File After Importing Public Key
Feb 27, 2010
I created a key pair in kgpg on suse 11.1 kgpg version 1.2.2. i am able to encrypted and decrypted files on the pc with no issues. I then exported the public key for the key pair created above, placed on flash drive and moved to my laptop running suse 11.2.
i open kgpg version 2.2.2 and imported the key, all was good. I then passed the file encrypted on 11.1 to the 11.2 laptop and with kgpg tried to decrypt the file, but the decrypting failed. The details shows the public key i just imported and then it says gpg:decryption failed: No Secret key.
I am not clear why on it is failing and if i missed a step some where along the way.
View 1 Replies
ADVERTISEMENT
May 14, 2010
I loaded off DVD for Kgpg, but click on it and have the bouncing lock key, then disappears from menu bar. De-installed and Re-installed several times. Will not work properly.
Brand new installation, TODAY
View 3 Replies
View Related
May 14, 2009
I highlight text in an email, "cut". Right click KGPG, encrypt clipboard, select my own public key, go back to email and "paste" and it appears in plaintext! WTF I tested it in kwrite too. Wrote the text "hello world", highlight, cut, encrypt clipboard, select my public key, paste, "hello world" appears! WTFx2
View 17 Replies
View Related
Sep 24, 2010
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
View 2 Replies
View Related
Feb 28, 2011
When run xbmc error acquiredparams.cpenConfFile() - Unable to open configuration file "/home/hamed/.smb/smb.conf": No such file or directorymb was disabled as default and I don't use it, I was put the smb configure file into .smb in home but problem still exist.
View 3 Replies
View Related
Jan 6, 2010
my squid show like this when i try create swap directory
[Code]....
View 2 Replies
View Related
Mar 8, 2010
CentOS 5.x with AD authentication. My samba servers(3) are all reporting the same error:
Quote:
Unable to open new log file /var/log/samba/xxx.xxx.xxx.xxx. No such file or directory.
lib/debug.c:reopen_logs(625)
The xxx.xxx.xxx.xxx is the ip address of the station accessing the samba share I assume.
View 4 Replies
View Related
Jun 22, 2010
when I save my Google contacts to csv file and import to evolution the contacts are missing most of it's information. some have part of their names etc... how can i add my existing contacts so it's complete. Do i need to save it to a different type of file?
View 2 Replies
View Related
Oct 8, 2010
I am unable to open .rar file on debian lenny. unrar-free has been installed but it does not open the .rar file. Is there another software i need to install?
View 5 Replies
View Related
Jul 3, 2009
I got this error:
Unable to open pty: No such file or directory
I tried these commands with no luck:
Also this:
View 1 Replies
View Related
Feb 27, 2010
Well my problem is that i want to configure Net filter (FORWARD) not manually but by importing a text file which may contain a binary array with c++ language like :
0 0 1
1 1 0
0 0 1
with 0 is "IPTABLES -A FORWARD -p udp -j ACCEPT"
and 1 is "IPTABLES -A FORWARD -p udp -j DROP"
so after importing i want to find in my firewall 9 rules equal to the numbers of the binary array.
View 1 Replies
View Related
Dec 31, 2008
I have two large HDD's in my windows based system. Of course I partitioned them and such (by the way the OS is XP Home) I decided that i would like to try Ubuntu so set up a live CD of version 8.10. now I used the install directions on the disk and installed onto a external 500 gig HDD.Now I can't boot to XP and I get GRUB errors. Some times iit's error 17 sometimes it's 21 . I try using the command terminal ...sudo ms-sys /dev sda1 (my boot-able NTFS disk) but I get "Unable to open -m/dev/sda1, No such file or directory"
View 5 Replies
View Related
Jan 28, 2010
i got this error im using turbo c++ 3.0.
View 1 Replies
View Related
Jun 13, 2011
I am trying to import a data file from old DOS application into MYSQL table The file is clear text file with fixed-width columns, without column delimiters
Example file :
Code:
4444333666666
2222666555555
iiiiwwwcccccc
[Code]...
View 3 Replies
View Related
May 29, 2011
Installed 11.04 a couple of months ago and I can't seem to get kgpg to run at all. It installs fine and shows it self on the Accessoriess menu, but after being clicked, does nothing. Tried un/reinstall, no joy
View 1 Replies
View Related
Jul 31, 2011
I'm experiencing a problem running Banshee 2.0 on my Ubuntu 11.04 system. Basically, I'm getting the following fatal error, the code of which is quoted hereunder. Of note is that uninstalling and reinstalling Banshee (through Ubuntu Software Centre) doesn't fix this problem. Incidentally or not, I also seem to have a problem with my other (and preferred) media player, Amarok. This is the error code:
Code:
Si verificata un eccezione non gestita: Sqlite error 14: unable to open database file (SQL: UPDATE CorePrimarySources SET CachedCount = 1568 WHERE PrimarySourceID = 1)
at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0
at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0
at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0
Exception has been thrown by the target of an invocation.
View 2 Replies
View Related
Apr 11, 2010
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
View 9 Replies
View Related
May 5, 2011
Using my laptop, I'm trying to get onto the local library's wireless network, with zero results so far.Basically, I can see the network, but when NetworkManager tries to connect it just spins for a few minutes and then rejects the connection. (Or the connection is rejected by the router) My wireless connection works fine when connecting to my WPA home network.
View 4 Replies
View Related
Jul 10, 2011
I'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies
View Related
Jun 19, 2011
I have an Ubuntu server x64 (10.04) that is running FOG for imaging Its installed on an Intel server board (1 RU rackmount) I configured the RAID in an Intekl based BIOS utility which Looks similar to This Ubuntu installed and runs perfectly. however im unable to monitor the status of the drives from the OS, so Im unaware of any drive failures that may occur I manged to install megacli but it returns blank data (along with exit code: 0x00) Iv also tryed megactl wich says
Code:
unable to open device /dev/megadev0: No such file or directory
one of my colleagues who had used the server previously was certain that the raid was on board the intel site also makes mention of intel using LSI products in their RAID controllers Relevant section of dmidecode:
Code:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel
[code]....
View 5 Replies
View Related
Feb 8, 2010
The Ext 4 file system of the partition (dev/sdb1) is corrupted. When I seek to repair this using the boot repair tool it is unable to resolve this. I admit that I don't fully understand the problem - except that I'm unable to open and use programs.
View 8 Replies
View Related
Feb 25, 2011
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies
View Related
Feb 14, 2011
Within the documentation of example OpenVPN setups there is a setup that shows an OpenVPN Server with two network interfaces. One interfaces is plugged into the public internet network and the second interface is plugged into the private network.
Normally I assume that it would be best to place the OpenVPN system inside the network behind the router and firewall and open only the ports needed on the router to allow access to the OpenVPN system. All other router ports would be closed. This is the first example they show. To see what I am talking about see page(s) 6-7 here -> [URL]
If one were to use the two interface public facing setup, when would that setup best be justified? I guess if you didn't want to open any ports on the router/firewall then this could be justified but then you have to lock down this public system individually instead of having it protected by the network firewall.
View 1 Replies
View Related
Feb 2, 2010
I've played with various distros over the last couple of years but always given up due to video problems. I've just installed 11.2 and the video problems are no more so I want to try and stick with it but..... unless I can get my emails across from Windows Mail I'll have to give up. Is there a client that will sensibly import my emails without too much fuss? I've got thousands of mails that I want to move across and they're split into around 50 folders.
View 5 Replies
View Related
Apr 26, 2011
I have 2 machines and i configured one how i like it to look. i.e desktop configurations including panels and etc. What i want to do now is it to import all the display settings from one machine to the other laptop i.e. same desktop environment including all the panels with all the shortcut.
Does anyone know, if i can do it or do i have to manually configure everything again.
View 6 Replies
View Related
May 24, 2011
However, I do not consider myself a Linux pro - I hardly ever use the command line etc.
I have been using the Free personal version of VirtualBox for about 3 or 4 years and have had no problems in any version of OpenSuse (at least none that were not easily fixed). I upgraded to OpenSuse 11.4 several weeks ago and cannot get Virtualbox to work. I have tried installing from the opensuse 11.4 package on the VBox site and I have run their generic command line installer and either way I am unable to open my VMs.
When I used their generic installer I got the following errors:
linux-evl8:/home/frank/Downloads/VBox # ./VirtualBox-4.0.8-71778-Linux_amd64.run
Verifying archive integrity... All good.
Uncompressing VirtualBox for Linux installation...........
VirtualBox Version 4.0.8 r71778 (2011-05-16T17:05:29Z) installer
[Code]....
I did a reinstall of OpenSuse for several reasons and it is working great in everyway except I am still having this issue and at this point I am lost as to what to do next.
View 4 Replies
View Related
Apr 1, 2010
Just switched to openesuse and kde enviroment few days ago, and now I'm snooping around etc.
Anyway I'm having this problem, I'm running a file server at home for my video, data, music and so on. I've used ubuntu untill now (server is also running ubuntu), and I've used vlc to watch the files directly from the server, I never had any problems with it until now (in ubuntu gnome). I navigated with nautilus to a location on the server double clicked and the video opend in my local vlc. Now I'm getting the tittle error, using opensuse 11.2 kde 4 and dolphin. Also I'm told to check the log...
While back I installed dolphin in my gnome on ubuntu, and i remember I got the same error when i tred to open the file on a server and tried to play it in vlc tru dolphin. So...Is this a known issue? Could this be related to dolphin/kde? Where is the vlc log file in opensuse 11.2? Where can I find some workarounds or something?
View 9 Replies
View Related
Apr 21, 2010
When trying to conigure via nvidia-setting using root (sudo) and then saving to config file I get the ' Unable to open X config file '/etc/X11/xorg.conf' for writing.' in a message box - below is what i get on terminal:
Code:
Traceback (most recent call last):
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 75, in <module>
operation_status = main(options)
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 51, in main
[Code]...
View 7 Replies
View Related
Apr 8, 2011
I have a problem about to open zebra service after install quagga by command(./configure ; make ; make install ) and add service port ("/etc/services")
#service zebra status
zebra dead but subsys locked
and can't telnet to zebra
"telnet: unable to connection to remote host: connection refused"
I following a manual http://www.quagga.net/docs/docs-info.php but it's not perfect.
View 2 Replies
View Related
Apr 23, 2010
My web server public IP is: 202.1.2.3 and it was natted to internal IP 172.16.1.31 just confusing why I am unable to browse http://202.1.2.3 from LAN? (I able to browse http://172.16.1.31 from LAN)
View 11 Replies
View Related
