OpenSUSE :: KDE4 - Plasma Crashing After Login ?
Mar 12, 2010
There's just one minor glitch - everytime I log in after reboot, the plasma desktop crashes right at the beginning - a window appears saying something like "The desktop process unexpectedly quit" ( I have a polish version, don't know the exact translation ) and leaves me with a big red button in the middle of the screen ( but the system seems to be fully functional ). When I log out and log back in without rebooting everything works just fine. The error is 100% reproducible. On the other hand - if I log into runlevel 3 first and then start the X manually, then there's no error.
View 9 Replies
ADVERTISEMENT
Mar 7, 2010
I've been experiencing a strange problem with Plasma locking up. Running system monitor it shows the KDE4 process using 20% CPU time, and Plasma around 10-15%. This seems way too much since on my six year old Laptop the cpu load of both processes is barely noticeable. My Laptop is an old single core 3000+ AMD Athlon 64, while my Desktop has a Quad core Xeon 2.33Ghz chip, so the fact that the KDE4/Plasma system load is many times higher than on the Laptop, indicates something is wrong.
I'm not sure what else to look for troubleshooting wise, any suggestions? *Actually, thinking about it, the KDE4 process is timing out one CPU core, which indicates to me something is really not right.
View 9 Replies
View Related
Jan 18, 2011
I am finding that plasma-desktop crashes on a freshly installed 11.3 64-bit VM in VirtualBox whenever memory is set to 512MB. I created the VM with 1GB, which is overkill for what I am using it for. At that point all was well. After lowing memory to 512MB, it boots and starts to load the desktop, which fails - error log below. Increasing memory to 756MB allows it to load fine again.
I don't really need a desktop environment on this VM, but it seems odd this is happening at all. 512MB should be fine to run a basic VM with KDE and per Hardware requirements - openSUSE 256MB is the minimum, and 512MB is recommended.
While it's not a big deal, I am a bit curious why this really needs 756MB to run a bare bones system and just launch KDE. Really? We've come to that?
Perhaps I just long for the halcyon days when Linux would run, including a desktop environment, on a 486 with 256MB . . .
Code:
View 1 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 27, 2010
I had a my system running KDE4 and my Hard drive crashed. I ahve replaced it with a RAID 1 configuration and reloaded my data and such. However I did not use sid repos so I only have KDE3.5 installed. The big thing I hated about KDE4 is plasma would crash at least 3 times a day and have to be restarted.
Is there a way to install KDE4 without installing plasma?
View 1 Replies
View Related
Dec 16, 2010
I had openSuse 11.3 KDE4.4.4 installed and used the 1-Click install to get the nVidia drivers. However, this gave me the problems with Amarok and other applications crashing. I switched the system repos to use packman but that didn't help.
The solution on the forums seemed to be either recompile with an old nVidia driver or upgrade to KDE4.5 as most people were reporting to not see it under 4.5.
Upgrading seemed to be the easiest method, especially as there appeared to be a stable repo now.
I upgraded and now plasma-desktop crashes on login! Is getting the old nVidia driver my only option now?
zypper lr -d
Code:
# | Alias | Name | Enabled | Refresh | Priority | Type | URI | Service
--+--------------------------+-----------------------+---------+---------+----------+--------+---------------------------------------------------------------------------+--------
1 | KR45 | KR45 | Yes | Yes | 99 |
[Code].....
View 7 Replies
View Related
Apr 19, 2011
I installed openSUSE 11.4 today and I have a problem. After login, KDE Plasma hangs for about 30sec and I can't do anything. The keyboard and the mouse are working, but if I click, I don't get any response only after about 30sec.
This is a fresh install, 32bit, I'm using only the Oss, Non-Oss and update repositories and the system is up to date.
I have an nvidia 9500M GS graphics card, first I thought it is a driver bug, but I tried both the stable 260.19.44 and the latest 270.41.03 drivers, and was no difference.
I made an another user to try with a clean kde, but the same happened.
I have nothing in my Autostart directory, and I cleaned also the /etc/xdg/autostart dir, leaving there only the pulseaudio related files.
View 5 Replies
View Related
Dec 22, 2009
After updating some of my packages to the newer versions, I restarted my computer so that I could experience the full effect of the update. When I attempted to login, Plasma Workspace crashes and nothing loads. I am forced to use another window manager to login into the system, and when I investigated into this problem by typing plasma-desktop in the command terminal, I receive this error:
Code:
plasma-desktop(18223) getComponent: Failed to connect to the kglobalaccel daemon QDBusError("org.freedesktop.DBus.Error.NameHasNoOwner", "Could not get owner of name 'org.kde.kglobalaccel': no such name")
explain to me how I can fix this error so that I can finally go back to using KDE4?
View 5 Replies
View Related
Nov 12, 2010
Got a problem with the plasma network management widget. Let's say I connect to a wireless network at my office called "Network A". I then go home and try connecting to my wireless network, "Network B". Assume each has WEP encryption. When I click on my home network, the wallet-manager pops up first. I enter my password. I then see that instead of adding a new network, it has "Network A" selected for editing. This happens every single time. What is going on here? I don't want a bunch of posts naming WICD either. I want to use the plasma widget because I like it. So what's up with it overwriting other network connections when you try adding a new one?
View 8 Replies
View Related
Mar 11, 2011
Every time I boot my computer, I'm greeted with the KDE crash handler poping up telling me that Plasma Workspace has crashed.
I have followed the bug reporting process.
Code:
View 2 Replies
View Related
Jun 10, 2010
when users login in kde4 it shows kstartconf4 not found or failed error code 127. for both suse 11. 1 and suse 11.2 but kde3 works well I removed .kde etc it still failed
View 5 Replies
View Related
Oct 4, 2010
I can't log into my normal user account at bootup; it just bounces back to the login screen.
However, I can log into the user's terminal window from the root account.
I've tried deleting and re-creating the user, but to no avail.
Is there some special file that I could delete before re-creating the user?
The one that holds the (corrupted) authentication data, perhaps?
View 6 Replies
View Related
May 14, 2009
at first my system: I use 32-bit openSUSE 11.1 with the following repos:
Code:
user@machine:~> zypper lr
# | Alias | Name | Enabled | Refresh
[code]....
View 7 Replies
View Related
Feb 3, 2010
I have just did some recent updates and when i did that, i wanted to have the full effect of the updates.Once i restarted, It came up with a black screen, had a couple of windows open(because i had them open before.) All i can do is enter windows, I am on Kubuntu 9.10. There is some blocked updates and one is Kubuntu-Desktop. But i can't get it.
View 9 Replies
View Related
Apr 16, 2011
I just upgraded to Natty Beta 2, and when I tried to login, I was told that /tmp/2145539930/.kde/share/config/kdedrc is not writable (along with tmp/2145539930/.kde/share/config/knotifyrc is not writable). When I run ls -l, I get
Quote:
-rw------- 1 kdm nogroup 39 2011-04-16 19:55 kdedrc
I can dismiss the dialog box, and after a few seconds of delay, see a crash report that kdeinit4 seg faulted. I dismiss this and log in to see plasma not running, but I can Alt+F2 any command I wish (except plasma-desktop, it doesn't run). I already purged kdm and reinstalled, and I'm trying plasma-desktop now.
View 5 Replies
View Related
Feb 16, 2011
Ever since I have upgraded form fc 11 to 14, I cannot login using the KDE desktop, I am forced to use gnome. The problem with that is that KDE apps are not running well, slow and often crashing, when I try to use them under gnome.
Symptoms.
1. Attempting to log in as any user with either KDE or KDE failsafe selected brings up the KDE splash screen, the hard drive icon, and occasionally the wrench icon.. a long pause and then back to the login screen.
2. I have these problem described in other Linux forums and have attempted to implement their recommendations
2.1 Deleted the .kde and other directories associated with KDE, reinstalled KDE.
2.2 Checked the permissions on all the requisite files and directories to ensure that they were good.
2.4 Looked through endless log files for ANY clues.. none
3. KDE applications, like ocular, take about a minute to start up, respond very slowly and eventually stop responding. Gnome applications work normally.
View 7 Replies
View Related
May 28, 2010
I am using Kde 4.4 and I would like to start one of the applications automatically after every login to the system. How can I configure it? I remember I managed to find a dialog window in one of the previous versions, but I can't find it now.
View 1 Replies
View Related
May 20, 2009
Hello.I am using Opensuse 11.1 (just installed),gnome-based .My problem is,I can only login as root,cos the tty's attached to my normal user(non-privileged)keep crashing(I checked this with last).Is there any way I can fix this?I reinstalled several times,nothing to do.
View 9 Replies
View Related
May 1, 2010
So is this what I get for not upgrading because the support for 8.10 ends on 4/30? I have 8.10 but it is locking up immediately after logging in. It's a 64 bit system and has worked flawlessly up to this point. Ctrl-alt-BS does not work. Alt-Sys-K does not work. Alt-Sys-R, E, I, S, U, E does not work. Only turning off the power resets the computer. Memtest turned up nothing.
View 1 Replies
View Related
Jan 22, 2011
I am using KDE4 on 10.10 64-bit.
Only ever use the KDE desktop so completely removed XFE and the rudimentary Gnome left behind on the install.
Not a desperate problem just an annoyance.
Everything works fine, except if I logout the next login screen is using a really tiny font and I can't seem to find anywhere to change it.
The DPI must be about 10, as I can't even read it when blown up on my projector.
View 1 Replies
View Related
Feb 12, 2010
I am trying to change the login screen from "Configure Your Desktop>Advanced>Login Manager".When I go into the login manager, everything is grayed out,you cannot change anything.I have to change it as root but I don't know how to do that. Therefore I need help regarding that. I did google searching but it was not of any help because they were for previous releases of mandriva or other distros which didn't apply to my case.
View 4 Replies
View Related
Jan 4, 2010
Okay well here is what I notice in the syslog
Jan 3 23:52:38 Sai kernel: [ 3914.806177] __ratelimit: 3 callbacks suppressed
Jan 3 23:52:38 Sai kernel: [ 3914.806183] compiz.real[1908]: segfault at 11 ip 08055c2d sp bfccbb70 error 4 in compiz.real[8048000+34000]
Jan 3 23:52:38 Sai kernel: [ 3914.866575] operapluginwrap[2169]: segfault at b66a5030 ip 003cbd1d sp bff5e5d4 error 4 in libpthread-2.10.1.so[3c4000+15000]
[Code]....
It seems starting up gives a ton of errors I can't really isolate. The above boot errors are in no order. I just pasted them all together.
What happens is randomly when Im browsing through videos on ....., it crashes back to the login screen. Im guessing this has something to do with Opera's plugin/Sound/Pulse Audio.
View 9 Replies
View Related
Dec 12, 2009
I've just killed plasma-workspace process and it doesn't restart itself, how can I restart it?
View 2 Replies
View Related
Jul 22, 2010
I've been fooling around with Gnome-Shell for a while now, which fits nicely on my small-screened (12") laptop, but the openSUSE 11.3 version has proven less-than-stable for me. Now I am interested in the Plasma Netbook Workspaces, which looks intriguing... The question is, [ 1 ] to install it (which I can do from Plasma Netbook Workspace - openSUSE, but the documentation is rather sparce), do I need to run MeeGo, or can I take a stock installation of openSUSE?
I don't have much luck installing openSUSE via DVD (or DVD image via USB) so I am thinking of installing via the KDE Live CD and then install the Plasma Netbook Workspace. This is basically how I installed Gnome-Shell (install from the Gnome Live CD, then install Gnome-Shell). Once it is installed, [ 2 ] how do I turn it on? Will it be an option in the login screen? I'll admit, though, I am more of a Gnome guy, but going to Gnome-Shell may be a half-step towards something like this.
View 4 Replies
View Related
Dec 16, 2010
I just installed OpenSUSE 11.3 last night and so far today I have had TWO Plasma crashes which leave the taskbar in a black color with stripes.
After the first one I located a post on the Web that said to do the following:
logout
Do CTRL-ALT-F1 (this does not work on my system at all, why?)
login
rm ~/.kde4/share/config/plasma*
CTRL-D to logout
CTRL-ALT-F7
Login
I did that and it did not fix the problem. I messed around with the desktop settings and somehow got the task bar back to gray.
Now during a copy of a large number of files from one disk to another with Dolphin, it crashed AGAIN.
So far 11.3 is proving a massive disappointment compared to the 11.0 I had on up to last night. Things are more complicated and clearly not as stable as KDE 3.5.x.
And I'm switching back to Konqueror as the default file manage because Dolphin appears to be unstable at doing a simple task like copying files without freezing.
I also hate the task notifier which during a copy pops up and covers my NoScript bar in Firefox.
do I have to switch to another distro? I really don't want to do that, but so far OpenSUSE 11.3 is a massive problem.
View 8 Replies
View Related
Feb 15, 2010
After KDE 4.4 installation I'm missing Plasma Air theme. how could i get it back?
View 9 Replies
View Related
Aug 3, 2010
Since installing 11.3 I've noticed that with certain Workspace themes the plasmmoids and panel have options missing: The theme in the screenshot is "Elegance" others have the same problem; "Oxyglass", "Heron" & "Aya". The panel has the resizing sliders missing. These were working ok in 11.2.
View 2 Replies
View Related
Sep 4, 2010
I have accidentally deleted the last desktop activity for Plasma. I cannot access the cashew and right clicking on the desktop does nothing. I can still see and use my panels just as I would before but there is nothing that I can put on the desktop do I get a desktop activity back from where there is nothing?
View 4 Replies
View Related
Oct 22, 2010
I'm running SUSE 11.3 32-bit and have run into an issue with the KDE Plasma Desktop crashing after login. I've submitted a bug report with the KDE folks, but thought it might be OpenSuSE specific. Details from the my KDE bug report [URL].. is as follows:
Application: plasma-desktop (0.3)
KDE Platform Version: 4.5.2 (KDE 4.5.2)
Qt Version: 4.7.0
Operating System: Linux 2.6.34.7-0.4-desktop i686
Distribution: "openSUSE 11.3 (i586)"
Information about the crash: What I was doing when the application crashed: After updating my OpenSUSE 11.3 32-bit workstation to the latest (as of October 22, 4pm EST) available here:
[Code]...
View 2 Replies
View Related
Jan 9, 2011
I have just upgraded KDE to 4.5 but after reboot and login i can't see my desktop. Only cursor, blank screen, and a window says:
Plasma Workspaces - The KDE Crash Handler We are sorry, Plasma Workspaces closed unexpectedly. You can help us improve KDE software by reporting this error
Details: Executable: KDEinit4 PID:3787 Signal: 8 (Floating Point Exception)
My PC:
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
GeForce 6100 nForce 405
openSUSE 11.3 32-bit
Using nVidia driver.
View 9 Replies
View Related
