when users login in kde4 it shows kstartconf4 not found or failed error code 127. for both suse 11. 1 and suse 11.2 but kde3 works well I removed .kde etc it still failed
View 5 RepliesMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View Relatedmaybe everything changed while i was stuck in 10.3 but i noticed soonafter install, and am just getting around to asking:i find these directories in the system's root directory very surprising:
/.config (with one file inside Trolltech.conf, which is empty)
/.kde4
/.kde4/share (empty)
[code]....
I can't log into my normal user account at bootup; it just bounces back to the login screen.
However, I can log into the user's terminal window from the root account.
I've tried deleting and re-creating the user, but to no avail.
Is there some special file that I could delete before re-creating the user?
The one that holds the (corrupted) authentication data, perhaps?
I have found this link "Login Failed" message when logging in through RDP
I am suffering from exactly these symptoms. Can anyone suggest what the likely cause is? How would that bug/solution relate to my environment: openSUSE 11.3/xrdp 0.4.1-85.1?
And lastly, how can I find out if the update implied under "Additional Information" has happened?
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View RelatedI want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies View Relatedwhen i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies View RelatedLast week my parents' PC conked out the day before I was due to leave the country, so in the few hours I had to try and knock up a solution, I set up a very old second machine in the house running openSUSE 11.3 with XFCE. I'd previously replaced the default login display manager with GDM, which evidently has various bugs. Aside from the cursor continually spinning around showing as busy, when I added a new user account for my parents, the login box showed two entries under my own name. It's only on hovering the mouse over the latter entry that my parents' username shows up. Anyway, I had to explain this and a million other quirks to them in a rush, but the system was all working and they managed to get me an email from it the following day.
Since then, however, when they reach the login screen they say there is just an image of a computer monitor, with the OS version and domain, but no usernames to choose from or other options anywhere, and hence they can find no way to login. I have no remote access to the machine and can only talk over the phone. I suggested a few key combos to see if anything happened, and they booted once in failsafe mode, but no luck.
What could have happened? Is there a key that would show the users again? Perhaps there's a way to get to a console login, but could they get back to a GUI easily after that? Unfortunately my parents are really not adept at these things and every instruction I give has to be repeated endlessly after which they usually get it wrong a couple of times first, so trying to do anything administrative or more clever than a few key presses or mouse clicks is going to be nigh on impossible. Running a live CD would be likely out of the question since they'd need to change the BIOS boot order first.
I have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.
View 6 Replies View Relatedat first my system: I use 32-bit openSUSE 11.1 with the following repos:
Code:
user@machine:~> zypper lr
# | Alias | Name | Enabled | Refresh
[code]....
I am switching to Gnome because its look and feel is closer to Windows for my workgroup. LDAP and NFS are working fine with KDE and SSH. but I cant login with LDAP users both directly or via NX client. When logging in directly on the server it shows this error:
Code:
"Xsession: Login for <user> is disabled "
When logging via NX client it says, it authenticated successfully and then quited with this popup message:
Code:
Could not connect to session bus: Failed to connect to socket /tmp/dbus-0frstajyNE: Connection refused
I closed this popup window and one more appeared:
Code:
Could not acquire name on session bus
[Code]....
Description: I want to migrate all home directories and users from one webserver to another. The old server runs OpenSuSE 11.2 and the new one OpenSuSE 11.4. I appended only the userpart of the passwd file from the old server to the new one. I did the same with the shadow file and the group file. I checked the user rights for all three of them and they were ok (shadow 600). I have done such a migration before and at that time it worked fine. Now for the weird part:
Errors: At first it seemed everything was ok. Websites and webshops were visible and working correctly. At first ftp seemed to work fine. Login worked but when uploading files, the error messages appeared: permission denied. Further testing gave following results:
-Root and users can login on console with their old passwords.Root can create new users, but they can not login: some error message comes, but is unreadable since it stays too short on display. After that it prints hint: on a new line and on another new line it gives a new login prompt. Root and users can change user's password, but then they can not login anymore. The same unreadable error message appears.
-Users can login with ftp, even after changing passwords(!) but can not change or add files var/log/messages only shows: uthentication failure twice.
Actions so far:
Emptied /tmp
reboot
copied the users again from passwd and shadow
checked UID's and GID's again
googled a lot
The login screen does not accept the password for users. Only the password for Root. The problem is not in the command line, but check the password in the screen. I have tried to change the password from the root and it is still the problem. What I can do?
View 2 Replies View RelatedI'm trying to run OpenSUSE 11.2 on VirtualBox (ver3.0.8 on Ubuntu 9.10). The installation proceeds without a hitch, but when I try to login, the login manager (kdm?) complains that the login failed. When I go to the console, my login/password do no work there either. I've tried installing OpenSUSE 11.2 three times -- the first two times, it complained about the simplicity of my password -- and all three times I've run into this problem.Have other users encountered a similar problem? It doesn't seem like a VirtualBox-specific issue. Is the /etc/password being changed somehow?
View 5 Replies View RelatedI have tried to install openSuse several times and the same problem would persistRight after installation, when the prompt to log in shows up, I enter a username and a password, but it says that login failed. I am sure I type in the correct data as I have written down the username and the password I register during the installation.Also, after the installation finishes, the computer restarts automatically, though instead of restarting it goes into a mode similar to stand by. The screen is blank and the media buttons of the keyboard are lit, but nothing happens, so I just restart manually. Could this have something to do with it
View 2 Replies View RelatedError message in /var/log/messages
login(pam_unix)[26769]:session opened for user root by LOGIN(uid=0)
login[26769]: Module is unknown
init: open(/dev/pts/0): No such file or directory
I have created a new user also but I couldn't login to the system. But I could login to the system as root and also with same new username password through putty from another machine.
I have a dual-boot system with windows xp and suse 11.2. The last time tried to enter to suse i couldn't login to my account ,only as root. I tried to solve this through suse dvd repair option andit detected a problem in grub. i repaired it but still nothing.Also the /home partition exists and i can access it when i login as root.
View 4 Replies View RelatedI have installed OpenSUSE a few months ago and worked fine. But from yesterday i can't login with root user. I received the message:
Login: root
Invalid user name
I have no question for password neither.
I was configuring usermod for vboxusers and reboot when suddenly I can't even login to my own account except for 'root'.
I had disabled user login before this. There is only 1 group when I checked in YaST which is 'users' and its group member is 'games'.
Why can't I login to home account?
Using openSUSE 11.4 (64-bit). Desktop is default KDE. All of a sudden I am no longer able to login. My desktop only has one user and when I key in the password (which I am 100% sure it is correct!) I get the dreaded "Login failed" message. I followed these instructions without success: How to reset/recover the ROOT password in openSUSE | SUSE & openSUSE Following the instructions in the above link, I tried re-typing the old password and created new ones too. But I keep on getting the Login Failed message. A strange situation
View 9 Replies View RelatedThere's just one minor glitch - everytime I log in after reboot, the plasma desktop crashes right at the beginning - a window appears saying something like "The desktop process unexpectedly quit" ( I have a polish version, don't know the exact translation ) and leaves me with a big red button in the middle of the screen ( but the system seems to be fully functional ). When I log out and log back in without rebooting everything works just fine. The error is 100% reproducible. On the other hand - if I log into runlevel 3 first and then start the X manually, then there's no error.
View 9 Replies View RelatedHow can I enable "Auto Login" for root user?In " Yast --> Security And Users --> User And Group Management --> Expert options --> Login Settings " is just my own user and there's no root user to choose.
View 9 Replies View RelatedIs there a way to login to an account with only the root password? Because I really need it the first unlock the computer next to me and second because I just want to know.
View 9 Replies View RelatedSo when I write my password in a terminal the letters occur in clear not ***(star). what shall I do that enetering the password to work right.I want to say if I push key f for example the system to show me one *.I know it's easy but really I forgot .
View 9 Replies View RelatedI just did a clean install of 11.3 over my dual boot xp/11.2 system and kept my home directory.When I booted the system a console box came up.I then disabled auto login and rebooted.The login screen showed two users, 1- Tom and 2- Root.When I login as Tom the console comes up and when I boot into Root the GUI KDE system comes up.How do I delete Root from the Login screen and make it so that user Tom boots into the GUI KDE desktop?
View 2 Replies View RelatedI just happened to lock myself out of ssh access on my xen virtual server since I changed the ssh port but forgot to open it in the firewall. No problem, I just access it through VNC in VM manager, I thought, however I have some special chars in my root password and the keymap through VNC seems to have changed somehow. So I cant login as root, nor do su or sudo. I can login as user. I need the sign " but can't figure out how.
View 1 Replies View RelatedNow i will try to explain my problem.I just installed fresh 11.04 openSuSe 64bit.After doing all the configuration I rebooted and tried to login.Nothing happened.Googled some things, tried ctrl alt f1 and login as root, also tried to login as root, even changed my root password to be sure.Still, nothing happens, except for the thing that everytime I try to login as root it says authentication failed, but if i type my password bad it says bad password.
View 5 Replies View RelatedI'd like to change the font characteristics (size, colour) on initial login screen (list of users) however I cannot find the configuration options.
View 6 Replies View RelatedI need to run a script (which requires root privileges) on login per-user only. I want this to runtomatically so I'll add an appropriate line to .profile.A couple of questions:1 The easiest way I can think of to run the script as root is to setuid, but I know there are security concerns. Is there a better way
View 6 Replies View Related