OpenSUSE Install :: What Does "Receives Mail" Do
Mar 28, 2011During a clean install, at the setting up of the original user, there are two check boxes: "User Receives Mail" and "Automatic Login". What does "Receives Mail" do?
View 9 Replies
ADVERTISEMENT
Server :: Send A Mail From Outside The User Receives?
Jan 28, 2010i have ipA -> web server
and ipB -> mail server
when i send a mail from outside the user receives it but when i send it from my web server in mail logs i get the following error
relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown
OpenSUSE Install :: Any Way To Backup Mail Folders?
Aug 29, 2010I'd like to know if there is a way to backup mail folders, as they are. I already tried trough the "file" menu saving function, but it seems to be available for single messages, otherwise it saves more selected messages as unique file. I'd like to manage mails directly on backup support, one by one if I need...
View 9 Replies View RelatedOpenSUSE Install :: Use Xampp And Also Configure Mail Agent In It?
Feb 5, 2010how to use Xampp and also how to configure mail agent in it
View 9 Replies View RelatedOpenSUSE Network :: Install A Mail Server For The Company?
Aug 18, 2010I was asked to install a mail server for the company I work for 'cause the mail fowarding service is getting pretty expensive. As an openSUSE user I decided to use my beloved distro for that task rather than a Windows 2003 Server. I want to avoid using MS Windows OS and use openSUSE so I can introduce this "new" technology to the company. I have the evil () plan to progressively migrate from MS Windows to Linux and this is an excelent opportunity for showing what is Linux capable of. Unfortunately I'm a rooky Linux admin and I could not get any satisfactory results yet. For testing purposes I managed to point an MX record to an static ip address (200.69.219.57) using No-Ip service. I've tested it using dig unitan.sytes.net MX command.
Then I installed openSUSE using 3 hdd, 1 for system files and directories and 2 setting up a RAID 1 array mounted under /var directory because I've read that there is where the e-mails will be stored. I've followed a couple of documents presented in these forums to no avail. I did install the system using LDAP but I could not get/install/create any certificate so users could not authenticate (Dovecot said so)
Red Hat :: Install Davmail As Mail Client For MS Exchange Mail System?
Jun 1, 2010i have redhat linux 5 (2.6.18-53.el5) and i am trying to install davmail as mail client for MS exchange mail system. i am trying to install davmail latest i.e 3.6.6-1032 x86 version. i installed java 1.6. and excuted java -version. it showed me correct version. i.e java 1.6. but when i ran ./davmail.sh it gave me following message it opened port 389 and the next message was DEBUG (checkrelease) davmail: unable to get released version what could be the problem
View 1 Replies View RelatedUbuntu :: Evolution Receives Mails Only Once
Apr 19, 2011I created three pop accounts in evolution. For jka-walgau.at my name, office and mobile. The first time everything ran ok (all new mails could be downloaded, and from each account mails could be send). After a day (iIset the computer up for a friend) there arent no new mails that come in (webinterface tells me there are new ones).
SSL for pop and TLS for smtp were set.
The problem is they are selfsigned certificates. The first time when I configured the accounts and clicked the button to test the authentication methods I got a warning (self signed) no button to add this cert permanently only a OK buttton and in the upper corner the (x) to close. How should I handle this problem.
Programming :: C++: Broadcast Receives No Answer
Dec 22, 2010It could run on my computer. But there is no result.
[code]...
Software :: SMS Gateway - Receives Sms Via GSM Modem ?
Mar 15, 2010Does anybody know any useful free software for SMS Gateway (like OZEKI software under windows) for linux that receives sms via GSM modem convert it to mail and/or fax and visa versa and has web base configuration GUI?
View 3 Replies View RelatedProgramming :: Why Does A Child Exit When The Parent Receives A Signal
Mar 16, 2011I have a problem with the last point of some homework I have for an OS class. I need the program to print the pid upon execution, then for 10 seconds react to SIGUSR1, SIGUSR2 and SIGTERM. If either USR1 or USR2 is received, the 10 seconds are reset. Some of the functions I'm told to use are alarm(), pause() and signal(). The nicest way I found was to handle SIGUSR1, SIGUSR2 and SIGALRM in the parent process, with SIGALRM killing the child (with a SIGTERM). In the child a pause() (or for(; pause() would be enough for it to be alive until killed from the SIGALRM handler in the parent.
What I found is that I can't just do a wait() in the parent process, waiting for the child to be killed, since whenever the parent receives a SIGUSR1 or SIGUSR2, the right handler is called but the child exits nicely. I tried blocking/ignoring those signals in the child, since the default behaviour for SIGUSR1 and SIGUSR2 is to terminate the process, but the result is the same. The only way I could do it is using a waitpid() within a do { } while(!WIFSIGNALED(status)) since when the child gets killed with the parent's kill(), it's WIFSIGNALED, whereas when it exits after the parent handles a SIGUSR1/2, it's WIFEXITED.
P.S. What I'm doing to achieve the expected 10s window is calling alarm(10) in the parent process and again within the SIGUSR1/2 handlers. In the SIGALRM handler I kill the child and within the child I simply do a for(; pause()
Ubuntu Networking :: Network Manager Vpnc Connects But Receives Nothing?
Oct 25, 2010I'm trying to connect to a Cisco VPN at work from Ubuntu 10.10. On earlier versions, I was able to import the config and get it working. In 10.10, though, the best I've gotten is being able to connect to the VPN, see the welcome message, and have packets sent over the tunnel. I don't receive any packets, though.
The command-line vpnc client connects just fine. I found this bug report: [URL]
The symptoms it describes are exactly what I'm seeing. The apparent solution is to "make sure in your config that LZO Compression is enabled (checked) under Advanced"; however I see neither an option for compression nor an "Advanced" tab, button, or anything on my VPN config in Network Manager.
Server :: Bind Receives NOTIFY For External View But Not Internal?
Jul 12, 2011I have two DNS servers, one local and one remote, and I am trying to get them to talk to each other using views.
The problem I'm having is that the remote server can talk to the local one and receive zone files, but if I update the local server internal view, the remote doesn't receive the update. Here is my config:
Quote:
key "external" {
algorithm hmac-md5;
secret "xxxxx";
};
controls {
inet 127.0.0.1 allow { localhost; };
[Code]....
General :: Syslog Program - Send Email In Response To Messages Receives
Jun 22, 2010I'm running a cobalt raq550 web server (Linux version 2.6) and I want to install a syslog program on it, something that could log messages and send me an instant email in response to certain messages it receives. Is there such a program?
View 6 Replies View RelatedOpenSUSE :: Receiving Mail Through A "standard" Mail Server Setup?
Aug 25, 2010Through yast2 I went to network services-->Mail server and took the standard option. My connection type is Permanent, filled in the outgoing server information and got to the incoming mail screen.
I told it to accept remote SMTP connections, open a port in the firewall and bypassed the downloading section since I just want to directly receive mail (I did however tell it I wanted a daemon to fetchmail). Told it to forward root's mail to me and a delivery mod of Directly. And finished.
The system sends mail out but I can't seem to receive any. What did I do wrong or what else do I need to do?
OpenSUSE :: Firefox, "Get Mail" Extension, Thunderbird, And Default Applications / Clicking "Read Mail" Does Nothing?
Aug 1, 2010- Firefox 3.6.8 (64 bit)
- Get Mail extension (v3.3.4),
- Thunderbird (3.1.1)
Problem:
Clicking "Read Mail" does nothing, whereas clicking "Compose Message" opens Thunderbird as expected. Thunderbird is properly configured under "System Settings > Default Apps > Email Client".
Whereas, switching the default email client back to Kmail results in the Get Mail "read mail" and "compose message" functions properly opening Kmail in both instances.
This problem occurred for me before (when using openSUSE v11.1 and earlier versions of the apps), but I don't recall how I eventually solved it, or whether it was resolved via an update of one of the above apps/extensions. Nonetheless, I'm now confronted by the very same problem again.
Programming :: Creates A Child Process With Fork And, When The Child Ends, Receives The SIGCHLD Signal And Wait For Its Termination?
May 23, 2011I have a doubt about signals in C programming. I have done this little program to explain it. It creates a child process with fork and, when the child ends, receives the SIGCHLD signal and wait for its termination.Ok, quite easy, BUT when I execute this code the SIGCHLD signal is received twice, first as an error (returns -1) and the second one to finish the child process.I don't understand the meaning of the first received signal. Why is it generated? Is the code wrong? (if you add the SIGINT and press Ctrl+C during the execution it also receives two signals instead of one)
Code: #include <stdio.h>
#include <unistd.h>
#include <string.h>
[code]....
Programming :: C/C++: Broadcast Receives No Answer - Can't Find Right Answer
May 18, 2010How can I set the outgoing port for the socket? In wireshark, my outgoing port is 1024, and i want to set it to 6800 (or a similar port) I see the outgoing broadcast-message in wireshark, but no answer. There are three ECU's in the LAN, which should answer. The following code is a mixture of C/C++ and jointed from different articles:
[code]...
In wireshark I can only see the outgoing message. But the "recvBuffer" (in the lower part of the code) contains the same content as the sendBuffer. Is it right, that I need a sender and further more a receiver? Or should I receive the broadcast-answer on the same socket on which I send the bc?
OpenSUSE :: Mail-notification Is Not Working In 11.3
Sep 2, 2010i have installed opensuse 11.3 on my PC. i want to display pop up message when new mail arrives. For that, i have installed mail-notification 5.4 ( which requires libnotify-0.4.4). while building mail-notification,it shows the following error . "src/mn-evolution-folder-tree-server.gob:26:33: fatal error: mail/mail-component.h: No such file or directory compilation terminated. command failed."
View 2 Replies View RelatedOpenSUSE :: Need KDE Friendly New Mail Program
Oct 3, 2010So, after over 10 years, I'm ditching KMail. I just can't take Akonadi anymore. After a few hours of running, it just sucks the life out of my system. If I need to run Akonadi to run KMail, then I'm done with Kmail. So, I've got 10+ years of mail stored in maildir format, and I need a new mail program. I'd like to stick with something KDE friendly if possible, but I'll take what I can get.
View 9 Replies View RelatedGeneral :: Set Up A Mail Server On OpenSuse 11.3 Or OS?
Sep 23, 2010having mail server setup as my topic for my Diploma Final Project.I still confusing choosing which OS to setup, besides i prefer more GUI based configuration rather that command-based.
I did research through the internet about Postfix and Sendmail, also did i need a DNS for my server ? i need a guide.
Also, is it possible to have own domain ? like user@example.com....i mean to have own email address setup.
I will use my laptop to setup the mail server, which is inside Local Area Network(LAN) without going to internet.I hope to use another laptop/pc to do testing on sending and retrieving mail in the network.
Fedora Installation :: Newaliases - Root's Mail Is Not Showing Up In My Local Mail Inbox ?
Jun 14, 2009I just added my login id to /etc/aliases to forward root's local e-mail to my local e-mail account in evolution.
As always, when I make a change to /etc/aliases, I run newaliases. I now get the following, and root's mail is not showing up in my local mail Inbox:
Code:
Is this correct?
I understand my hostname (i.e., Eng-Lab-010) is not a fully qualified host name, but I never had a problem before. But it appears this not a good thing. What should I do?
Fedora :: Unable To Connect From Clients Computers To Mail Server For Receiving Mail?
Oct 15, 2009I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies View RelatedGeneral :: Set Nagios Directives To Only Send One E-mail Per Alert Without It Flooding Mail Boxes?
Jul 20, 2011I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedGeneral :: Sendmail Error / Unable To Work On WAN / Can Send Mail But Not Able To Recieve Mail?
Nov 15, 2010I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedUbuntu Installation :: Mail Gets Delivered To Var/mail And Var/spool And Squirrelmail Is Not Pickiing It Up?
Mar 12, 2010i have a VPS running Ubuntu server 9.10 i have installed postfix and courier folloiwng a tutorial on How to forge.i have installed also squirrelmail When i ran squirrelmail , i tried to send a mail to myself to see if it was working. Mail appear in the Sent folder of Squirrelmail However, the INBOX was still showing no messages when i logged in to the server, i see that mail was delivered in var/mail/info (my username). so, my question is: why mail gets delivered to var/mail and var/spool and squirrelmail is not pickiing it up?
View 1 Replies View RelatedUbuntu Networking :: Evolution Mail / Send Mail Saving To Current PC But Not To The Other PC?
Apr 20, 2010I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedUbuntu :: Get The Mail Applet To Light Up Green By Sending Myself Mail In Lucid?
Apr 30, 2010in Lucid ive been trying to get the mail applet to light up green by sending myself mail. Does this applet only light up when IMs r received or does this also work with evolution and if so what might i have done wrong in evolution, ive tried it with evolution open and evolution closed.
View 8 Replies View RelatedUbuntu Servers :: Courier Mail 556 Address Unavailable - Cannot Recieve Mail ?
May 6, 2010My courier server cannot recieve mail.
My freebsd installation has worked for quite some time w/o problems.
I'm using ubuntu as a replacement and have tried using the same settings from my previous server.
I keep getting the following error.
courieresmtpd:
Ubuntu :: Can't Send From Own Mail Server With Mail Client (Thunderbird Or Evolution)?
Jun 1, 2011I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
Ubuntu Servers :: Secondary Mail Server And A Mail Gateway/relay?
Aug 3, 2011Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
ISP supplied CISCO router
Draytek VigorPro 5510 UTM
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?