OpenSUSE Install :: What's The Way To Install Slim And Fluxbox?
Oct 20, 2010What's the way to install slim and fluxbox? zypper se fluxbox shows nothing.
View 4 Replies
ADVERTISEMENT
OpenSUSE Install :: Using Slim As Login Manager?
Jun 14, 2010I was trying to set up my Xfce desktop on a fresh install.
I personally dislike Xdm, which is given as the default login manager, and would prefer to use Slim instead.
It is possible to install it using the Package Search feature (it's listed under the Contrib repository), but I haven't been able to set it as the default login manager (I wasn't able to find such a setting in /etc/sysconfig).
Ubuntu :: Install Fluxbox 1.3.1 On Kubuntu 10.10?
Mar 16, 2011I'm trying to install fluxbox 1.3.1 on kubuntu 10.10. I downloaded the tarball and when I try to run ./configure, it gives me this error :
error : fluxbox requires the x window system libraries and headers
Where do I get these things?
General :: What Would Be The Best Distro To Install Fluxbox On?
May 18, 2011I have been hearing some cool things about window managers like fluxbox and I was wondering what the best distro is to put it on? Is fluxbox the best window manager to use?
View 9 Replies View RelatedFedora Installation :: How To Install Xorg And Fluxbox
Nov 20, 2010I plan to do a minimal install and then install xorg and fluxbox. I'm not familiar with the way fedora names it's packages. what packages I need to install to get a working xorg. This is just a regular install on a home system with no special needs.
View 14 Replies View RelatedSlackware :: Install Some Netowrk Manager And Configure It In Fluxbox?
May 28, 2011I have problem with my new distro and fluxbox. So I installed a slackware 13.37 with fluxbox, this is my first time with slack and fluxbox
I dont know how to install some netowrk manager and configure it in fluxbox I need wifi.
OpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process
Jan 30, 2011I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
OpenSUSE Install :: Install Gnome After The Minimal Server ( Console Based ) Install?
Feb 2, 2011Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedOpenSUSE Install :: Convert Factory Install Into Point Release Install Later
Jun 14, 2010If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedOpenSUSE Install :: Did Install Vsftpd, But Removed It And Install Pure-ftpd Instead?
Jul 18, 2010In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
OpenSUSE Install :: Install Suse Alongside An Existing Install?
Apr 18, 2010i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
Software :: Installing Fluxbox On OpenSuse 11.2
Mar 28, 2011From this link, I clicked, one click install, which resulted in:
Quote:
No such client module /tmp/fluxbox-1.ymp
The search path follows. It does not include the current directory.
OpenSUSE Install :: Overlapping Partitions With Fresh Opensuse 11.3 Install
Aug 4, 2010After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
View 9 Replies View RelatedOpenSUSE Install :: Re-install OpenSUSE From Hard Disk Using The Terminal?
Sep 29, 2010I'm running openSUSE 11.3 and screwed some things up so that I can't install anything, including UNetbootin. So I decided to completely reinstall. I'm limited to using my hard drive as there's no CD/DVD or floppy drives installed on the machine and BIOS does not support booting from USB.
I found these instructions - Install any Linux distro directly from hard disk without burning any DVD - Just Another Linux Lover Blog
From the terminal enter these commands
sudo mkdir /distro
sudo chmod `whoami`:`whoami`
cp MYLINUX.iso /distro/distro.iso
Now extract Linux_kernel & Ram_disk to /distro#
Open /boot/grub/menu.lst
#ADD NEW ENTRY#
title Install Linux
root (hdX,X)
kernel /distro/Linux_kernel
initrd /distro/Ram_disk
Reboot and select "Install Linux" from grub. Blog Widget by LinkWithin
Creating the folder "distro" on root was easy and went smoothly. I can't seem to make the second 'whoami' command work, though. I copied-and-pasted "sudo chmod `whoami`:`whoami`" into the terminal. It asks me for the root password, I enter that and then get
chmod: missing operand after `holly:holly'
Try `chmod --help' for more information.
I didn't see anyone reply in the comments of that page saying they had trouble with it, so I think I'm just being an idiot. One person did suggest adding distro at the end on another page and it gets me
chmod: invalid mode: `holly:holly'
Try `chmod --help' for more information.
OpenSUSE Install :: Stable - Install Nvidia - Driver 260.xx.xx In Opensuse 11.3?
Jan 19, 2011i know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.
1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates
2. install with the yast software re/installer:
(from Desktop or from the terminal. the terminal text command is: yast2)
[Code]...
u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.
OpenSUSE Install :: Install Some Wireless Drivers - Don't Have A /lib/modules/<kernel>/build Directory
Dec 14, 2009I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies View RelatedOpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?
Sep 14, 2010I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedOpenSUSE Install :: 11.4 Cannot Install RPM Or Execute Updates: Media Source Does Not Contain The Desired Medium
Mar 14, 2011Since I've installed opensuse 11.4 instead of 11.3, I cannot install .rpm packages nor execute updates. I get the following message: "There has been a (probably temporarily) when connecting to the software source/repository" (own translation) details: Media source [URL] does not contain the desired medium So, probably there is something wrong with my software sources. Could anyone give a suggestion to repair this since I'm not a linux expert and would like to install new software on my newly updated machine.
View 9 Replies View RelatedOpenSUSE Install :: Clean Install 11.4 Dual Boot System Grub Error?
Apr 27, 2011I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
OpenSUSE Install :: Install PDFedit - ./configure - Error: QTDIR Environment Variable Must Be Set
Jun 11, 2011I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View RelatedOpenSUSE Install :: Cannot Install KDE \ Exception Caught During Write: System.ComponentModel.Win32Exception?
Sep 7, 2011I am trying to install openSUSE 64 bit with KDE on my netbook and I am having some issues. I can't get the install started. I tried creating a live usb by using the SUSE Studio Image Writer, but I get an error saying: Exception caught during write: ystem.ComponentModel.Win32Exception: Access is deniedat ImageWriter.DriveAccess.Write(Byte[] buffer, UInt32 len)at ImageWriter.MainWindow.WriteToDisk()(This happens when I try to make the usb)I tried Googling it but I couldn't find anything so I tried creating a live usb using UNetbootin but when I boot from the usb, I get an error saying: Could not find kernel image: gfxboot.I have a 2 gb usb with FAT file format. Also I am only in High School, I want to try out different Linux distros so tell me if I did something wrong.
View 3 Replies View RelatedOpenSUSE :: Install Mplayer For 11.3 X86_64 - The 1 Click Install From Packman Is Not Working
Aug 2, 2010How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 Replies View RelatedOpenSUSE Install :: Update System - Without Having To Download / Install Every Dependency Manually?
Dec 13, 2009how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View RelatedOpenSUSE Install :: 11.2 - User Information Entered At The Beginning Of The Install Gets Lost
Jan 2, 2010When trying to install 11.2 from DVD, the user information I entered at the beginning of the install gets lost. I get to the Automatic Configuration step at the end of the install where the computer needs to reboot, and it asks for my user ID and password (it shouldn't do that). It won't accept the user I created (always says login failed), but it will accept root. That really doesn't matter, because the Automatic Configuration step has done anything, and I have a busted install. I've tried the install 4 or 5 times, but it is always the same problem. I eventually reinstalled 11.1 without any problem (though I did have to click Use Entire Disk on the partition section so it would delete the ext4 partitions created by the 11.2 install and create ext3 partitions).
View 3 Replies View RelatedOpenSUSE Install :: How To Install Video Card Of Netbook With Widescreen Resolution
Jan 3, 2010How can I install the video card of this netbook with widescreen resolution?
View 4 Replies View RelatedOpenSUSE Install :: Problem When Install Oci8 In 10 / Error: 'phpize' Failed?
Feb 16, 2010i try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
OpenSUSE Install :: Multiboot System, But Last Bootloader Install Doesn't Work?
Feb 16, 2010I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies View RelatedOpenSUSE Install :: Install 11.2 Via Network - Net_activate: Ifconfig Eth0 Up Failed
Mar 2, 2010I am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.
OpenSUSE Install :: Install GRUB On USB-drive - Umount /media/disk-1?
Mar 29, 2010I need to install GRUB on my USB-drive. I've gone through variety of manuals and articles but I have strange errors during install.
1) Insert USB in my laptop.
2) My OpenSUSE automatically mount an USB-drive, so I unmount it
Code: umount /media/disk-1
3) Format USB-drive into ext3
[Code].....
OpenSUSE Install :: Multiple Machine Flash Drive Install Planning?
Jun 18, 2010I have two different laptops that I would like to make bootable flash drive installs for, but would then like to have at least /home on a common removable storage (either a big flash drive or USB or ethernet hard drive) to share between the two laptops (I'll only be using one laptop as a Linux box at a time). One laptop (Dell Latitude D410) is only 32 bit capable (Pentium M - I think there's a 64 bit Core 2 CPU available for the socket 479, but I don't know if the BIOS / mobo will support it). If I'm going back and forth between 32 and 64 bits, can I share /home? What else can I share - /usr or anything else?
View 1 Replies View Related