My Suse 11.4 wired network is not displayed in the bottom panel inside of my networkmanager. I can connect to the internet It just shows a red box with a white x inside near my clock is there anyway to get this working?
View 2 RepliesI am wondering if it would be possible to change the top and bottom panels in gnome to black but leave the panels in apps, like the ones which all my Firefox buttons and file, edit and view etc menus rest upon shown below, grey as they are now?
My current system >> appearance >> colours config:
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
I'm currently using opensuse 11.2 with gnome. I accidentally removed the Networkmanager icon tool and I can't get it back. Ive searched under the "Add to Panel" list but its not there
View 3 Replies View RelatedI removed it by accident i want to put it back.
View 2 Replies View RelatedI closed the bottom panel in the picture.ut I could not find how to open
View 1 Replies View RelatedHow can i change the background color of the bottom kde menu panel? I tried with systesettings>Advanced>Theme,it's not changing anything.
View 3 Replies View RelatedI am just wondering if anyone else is running into this weird behavior on KDE 4.6. It's on an openSUSE 11.4 installation, 64 bit, on a laptop with 2 monitors. Normally, I have the following desktop/wallpaper/icon combo:Then, when I accidentally click my mouse on the bottom of my panel, I get this very ugly desktop for some reason:Also, when I then right-click in the desktop area to change back the wallpaper, the "Change Desktop Background" option does not work. This only affects the current desktop I am working on, so I end up just moving all my work to a new desktop, but it's awfully annoying. I don't even know where the wallpaper comes from - it's not one of the options in my wallpaper settings
View 9 Replies View RelatedI was working just find and the "Computer" GUI that is located on the panel that lets you have access to all CPU options went missing.. I understand I can hit F2 and get them listed but I need it back on my panel strip at the bottom of the desktop!
View 4 Replies View Relatedget rid of the bottom panel in Opensuse 11.2 and just use a dock with applets. However, if I remove the bottom panel, the little icon that allows me to connect to wireless will go with it, right? And it wouldn't do me much good to get rid of that, because then I can't connect to the Internet...So, is there a wireless connection applet for the dock? I didn't see one anywhere. I can install the file manager app, but could I access it from there on the dock? I just want to make sure I can still connect to the Internet without the bottom panel.
View 3 Replies View RelatedWhile screwing around with my settings trying to get 11.3 setup the way I wanted it, I accidentally removed the portion of the bottom panel which displayed the titles for all the current open windows....and I can't for the life of me figure out how to get it back.Can anyone tell me how to add it again? I'm sure its something incredible simple, but I haven't been able to find it
View 5 Replies View RelatedI am running openSUSE 11.3 on a Lenovo S10 netbook. I have the default panel that is installed with the Slab etc at the bottom of the screen set to autohide. However, it does not do this consistently. Sometimes I have to minimize and then maximize an app window to get it to hide again.
View 5 Replies View RelatedThis is strange a fresh install of 10.04 Lynx when i first logged in everything was cool, then i right clicked on the 4 desktop switching boxes on the bottom right corner; then the bar blipped off.Now after i re-login the bar is at the bottom but does nothing. When i open windows or anything they are not showing up, the only way I can navigate through my windows if Alt+Tab
View 9 Replies View RelatedI have had this problem with all installations of Maverick Meerkat. Moving the default clock from the upper panel to the lower panel makes it bahave strangely. When clicked on, it now appears in the middle of the screen (sometimes even higher depending on resolution). This never happened prior to Maverick Meerkat.
How do I go about to fix this strange bug?
Attached is a screen shot of what I mean.
I remember that I did configure my desktop PC for wired and wireless connections since openSUSE 11.2, 11.3 and 11.4. Currently I have openSUSE11.4 x86_64 KDE. Today I happen to notice that the icon for NetworkManager in the taskbar has been replaced with a red X. I discovered that Network Manager only shows VPN tab, whereas Wired and Wireless tabs are greyed out. The strange thing is I still have Internet connection with the CAT5 cable being plugged in. I can still configure wired and wireless connections via YAST but I cannot fix Network Manager settings.
View 9 Replies View RelatedI am in a dual boot with Ubuntu and win 7 wireless. When I install 11.3 I no longer have Ubuntu. Is there a process or procedure to assure multiple boot while I attempt to connect suse to my network
View 5 Replies View RelatedI had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View Relatedsince a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies View RelatedI just installed openSUSE 10.3. Unfortunately after updates and reboot the system and disappeared from the taskbar network icon. Does anyone know how can I restore?
View 9 Replies View RelatedI am new using SUSE and have one application running. I would like to put the school's new web site that I have runing on localhost on the SUSE box and would appreciate suggestions esp the broad steps involved.Do I install separately Apache, PhP, filezilla, etc. or just install XAMPP?What is the best way to keep the web site updated--ftp or some other way? Teachers want to make routine changes so I have to figure out a procedure.
What is the best way to tie down security besides having good passwords on all Usernames? (I have a 3COM device that I can allow services to specific IP's and define firewall rules. But most incoming would be port 80 which I cannot block.)
i was wondering if it is possible to put gkrellm (system monitor with temp) inside of the top or bottom taskbar. my laptop overheats and i would like to be able to see my temps somewhere on my screen permanently. im sure there is a plugin or something of that nature i dont know about, if there is,
View 2 Replies View Relatedi dont have networkmanager. what can i do?
View 2 Replies View RelatedI am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
I seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
Last night while setting up wired & wireless connection in openSuse 11.2 Gnome version via YAST's ifup, I got wireless but lost wired connection (interface eth0). Dmesg shows that eth0 became eth1. I cannot get eth0 back. Is there any way to remedy this situation, eg. get info from the Ubuntu partition in my triple-boot laptop, without having to re-install openSUSE?
View 3 Replies View RelatedI find that the new KDE4 notification icon is not very easy to see.The "progress" indication is a microscopic vertical progress bar, that I find very difficult to interpret.OK, it is a minor annoyance, but I do find that I regularly try to use the network on my laptop before the connection has been established.It is also a regression over the icons in 11.1 or before, which were very clear.If people agree with me on this point, I will post a bug, with the aim of getting a clearer icon.
View 1 Replies View RelatedI installed OpenSuse 11.2 LiveCD. I'm currently running patch download and installation so maybe this will fix my problem. When I use NetworkManager, WPA or WPA2 are not an option. I'm give four encryption methods (WEP 40, WEP 128, LEAP and Dynamic 801.x) Is this a problem with my Thinkpad T23's 802.11b wireless card? Do I need to install a patch?
View 4 Replies View RelatedI have a successfully connected VPN connection. When hovering on the networkmanager applet it show beside the wireless connection also the connected VPN. The icon also changed from staircase-bar to staircase-bar with forelock. Oh yeah I'm using GNOME desktop.However when right-clicking on it and choose Connection Information I can only found tab for the wireless connection. How can I have the information tab also for the VPN connection, showing like IP address and gateway used?
View 1 Replies View RelatedI just tested Networkmanager on OpenSuSE 11.2. I tried with my wired connection and it works.
I thought I test to connect with network sharing with my Android phone. The Android phone connects according to Networkmanager, but I'm not sure if it actually works as the wired connection is still active.
I tried to figure out how to disable the wired connection, but eventually gave up and just pulled the wired network plug.
But surely, there must be a way to disable connections from Networkmanager?