I am trying to use AutoYast on openSUSE 11.3 x86. I have a Hard Disk install from the openSUSE ISO in /dev/sda1 partition and this partition also has the autoinst.xml.The installer is not able to find my autoinst.xml and it complains "/dev/sda1 not mounted or mount failed".The Kernel command line parameter that I gave is "autoyast=device://sda1/boot/src/autoinst.xml" which is what works in SLES 11.0.
View 1 RepliesIn my last openSuse 11.3 installation, I "Clone" the system for AutoYast. So autoinstxml file was created in /root directory.How can I use this file in order to execute an unattended installation?
View 2 Replies View RelatedI'm trying to configure autoyast to create three primary partitions:
/dev/sda1 (/boot)
/dev/sda2 (swap)
/dev/sda3 (/)
This is the XML I've come up with:
HTML Code:
<partitioning config:type="list">
<drive>
<use>all</use>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
[Code]....
I seem to be missing an instruction or misunderstand something here.
How do I share default profile file by NIS so that I do not have to setup profile in every NIS clients?
View 3 Replies View RelatedThis is the first time I am using forum. I am using SUSE 11.0 I dont know which settings I made but for one of the user I am not able to see the blue bar which has minimize, maximize, close bar.
I tried to replace .bashrc other related files by creating new user but the problem still exists.
Kindly help me to know what are the user profile related files and what might be the cause for this.
what is the correct way/procedure to re-create a user home directory. For instance, on a Mac/Windows machine, i would just rename the existing user profile [home dir], and then just log back in as the user - job done. On OpenSuse/Linux, it seems it does not work that way..?! When i try to rename my home folder to say me.old via root, and log back in as me, i get all kinds of errors. Opensuse does create a new home dir, but it appears not properly.
View 9 Replies View RelatedI've already gotten into the .mozilla folder and found the profiles.ini file. My windows XP system has it's Documents and Settings folder on a seperate drive (D:Documents and settings) And I've located the profile (application datamozillafirefoxprofiles) Now all I need to do is put the path into the profiles.ini file in the .mozilla folder in Ubuntu. The problem is I don't know exactly how to format it.
In windows the path is:
How would I translate this into something ubuntu "follows?" I already have the profile name changed as well.
I downloaded three iso-images, 1 dvd-image and 2 cd-images:
openSUSE-11.3-DVD-i586.iso
openSUSE-11.3-GNOME-LiveCD-i686.iso
openSUSE-11.3-KDE4-LiveCD-i686.iso
Being paranoid, I created iso-files from the burnt DVD-R and the two burnt CD-R to verify integrity.
The iso-file of the DVD-R was identical to the downloaded image. Both iso-files created from the CD-R were different in size.
The original size of openSUSE-11.3-KDE4-LiveCD-i686.iso is 719.323.136 Bytes.
I only got 718.938.112 Bytes when recreating an ISO-file from my CD-R.
The CD-R is from Sony. When the length of my ISO-file doesn't correspond to the downloaded one, the checksum file verification doesn't work.
I try to use the same firefox/thunderbird profile in opensuse and in windows, but if i give the windows profile to the suse firefox, it says to me: "profile is already used/ firefox is already running " Is there any workaroud for this? Btw the profile sharing works well with ubuntu. I use opensuse 11.1 kde4 reloaded and the installer mounted my windows partition to /windows/c
View 9 Replies View RelatedIs recommended to create a profile in apparmor for applications like amule, firefox, thunderbird, amsn ....?
View 7 Replies View RelatedI have no sound in normal profile but when I log in to the root account I DO have sound using say Banshee, kaffeine. In other words it is not a hardware malfunction or not detected. I am sure it has to do with some rights (permissions) for the peripherals that the user or profile may not have.
I tried everything in terms of sound level etc.
on the same SAMBA server, can I have a net logon profile for WinXP and another for Win7?
View 6 Replies View RelatedI have already windows 2003 server with active directory, with 200 + user accounts and each user has allocated a specific disk quota. Now i want to install suse on client side so that it can do all same things as windows clients does(active directory login and disk quota). I have downloaded 11.2 suse linux and installed all samba required pakages and also joined the windows domain (2003 server). how can i access my user space located on win 2003 server from my linux client machine.
View 3 Replies View RelatedI'm trying to replace a 2k3 server with openSUSE. So far I was able to get working DHCP, DNS, SQUID and SAMBA with LDAP backend.Samba works ok login users and creating home and profile folders but somehow only the Domain Admin (administrator) account will automatically save the profile. The administrator account belongs to the ntadmins group while the rest of the users belong to ntusers group.
When I change a common user from ntusers group to ntadmins the profile will save without problem. If I change it back to it's original group the profile will be read but not updated on log off.Folder permissions seems to be ok. The network share (\pdcprofiles.msprofile aka Z is being connected with no problem and all users can read and write from and to it.
Powersaving on my desktop is way to agressive, it behaves like a notebook. The monitor switches off after just 4 minutes.Disabling PowerDevill makes no difference. Editing energy profile settings doesn't help either.Is there another way to force these settings?
View 2 Replies View RelatedIs there any way to run successfully umtsmon with kvpnc? Trying to build up a connection to a VPN provider using his profile openvpn and kvpnc. It connects as "low level connection" , the indicator of kvpnc remains red, but then kvpnc would not pass the network traffic through umts-mon (or better vice versa, umtsmon doesn't). In principle I would like to pass both interfaces (wireless, umts) through vpn.
View 4 Replies View RelatedWhy do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
drwxr-xr-x 2 jimt users 4.0K Jun 22 22:00 .gstreamer-0.10
-rw-r--r-- 1 jimt users 132 Jun 24 11:50 .gtk-bookmarks
d????????? ? ? ? ? ? .gvfs
-rw------- 1 jimt users 4.3K Jun 24 11:50 .ICEauthority
drwxr-xr-x 3 jimt users 4.0K Jun 23 08:41 .icedteaplugin
Asked this on Jul 21, and didn't get any satisfactory answers. Thought i'd ask again before i switch to Ubuntu or go back to Fedora: Has anyone gone to software.opensuse.org: Download openSUSE 11.3 and actually chosen "Installation Medium" as "4.7G DVD", "Direct Link", "32 bit PC", hit the "Download DVD" button and gotten the file "openSUSE-11.3-DVD-i586.iso" which is not 49.0MB?
I mean, the steps above are not rocket science, and not much chance of making mistakes, so i'm not sure how i can get a download popup which specifies that the file is 49.0MB file, if it's not actually that size?
I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies View RelatedI am trying to install shrew software in OpenSuse 11.3. So , i do cmake ... and finished correctly , but when i do make i got the following error: uic: File generated with too old version of Qt Designer (3.3) I checked the repositories and i got the lowest version of qt available : qt3
View 9 Replies View RelatedI'm trying to install amarok from git but I keep getting this error:
[code]...
I thought libXext provided shape.h but I have both xorg-x11-libXext and xorg-x11-libXext-devel installed.
[code]...
When I want upgrade and/or install any package from software.opensuse.org I've got error, "Couldn't find XML file" or anything same this.
View 4 Replies View RelatedI upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View RelatedReproducible with Firefox 3.6.6 (installed from Ubuntu 10.04 repository), on Dell D620, Ubuntu 10.04 Steps to reproduce:
1) start Firefox from command line "firefox -P"
2) create new Firefox profile on NTFS volume (mounted with NTFS-3g)
3) add NoScript extension (through extension manager Get Add-ons), restart Firefox as suggested
4) extension is not added to Firefox In case at step 2) profile is created on Linux volume, at 4) extension is added to firefox.I'm not 100% sure, but I think this bug is related to Firefox 3.6 update (no problems with Firefox 3.5). I did not make proper investigation, but I have feeling same problem applies to Thunderbird 3.1.This issue does not allow to share Firefox/Thunderbird profile on dual boot machine (Ubuntu/WindowsXP).
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedI want to install this program:I tried to download and unpack, but that dosnt seem to get me anywhere.Until now i have only tried installing through YaST.I dont understand the manual on the website.
View 9 Replies View RelatedI downloaded a ymp 1-click install file but clicking it just opens it in Konqueror and displays description and URLs. What am I doing wrong?
View 6 Replies View RelatedWhere is the sshd log file on openSUSE? I can't find it on
View 3 Replies View RelatedI do not have a DVD and the number of CD's it would take to d/l SUSE 11.4 is silly. Is there anyway to download the stuff to mky hard drive and run it from there?
View 1 Replies View Relatedhow i can extract this Login.jar..
View 9 Replies View Related