I found zypper and YAST2 are comparatively slower than apt-get in my situation.Because when one application, e.g KDE 4.6,which has a lot of dependent appz,those depencies are installed after downloaded one by one.But in the case of apt-get ,they are installing and downloading simultaneously.No doubt that apt-get are faster than zypper.
View 9 RepliesI can't get KPackageKit run successfully even once. Every-time I get the same message that can't correct the software origin as following:
While I can update the software through zypper in the terminal window, I also get a warning message to say some package will NOT be update as following :
I already implement the one-click solution to thread:Multi-media and Restricted Format Installation Guide, except that I got another warning message when I click to switch system packages to the version on packman repository as following:
Another question is every time I click the accept button of the YaST2 window, it will install the packages and quit directly and never give any confirmation of the result. Is this normal?
The last question is when I use Amarok or qmmp to play music which be shared via Samba on my homeserver, the system always copy the music file to the local folder,/var/tmp, and then can begin to play rather than play it immediately by stream. Is this also normal?
I have minimal open suse installed as a server and now i would like to install some packages with zypper and it always download some packages related to X11 and gnome but I want to ignore that.Is it possible some how that I can define a USE flag for that like -X -gnome?
View 1 Replies View RelatedI like to select one or two appz then install once a time.But each time when YAST finishes an installation it close without asking.If I want to install another appz in a few seconds,another refreshing repositories is needed.I have to wait a minute.It's quite annoying.Anyway to remain YAST open and let me close it manully?
View 4 Replies View RelatedI would like to be able to make the Yast package manager stay open after installing or removing packages.
View 9 Replies View RelatedI'm considering making a switch from Ubuntu/Linux Mint to Fedora 15 because I just adore, love, cannot be without Gnome Shell any longer. SELinux - I actually am finding I hate this program as it blocks certain plugins (like Java), some programs I run it blocks functionality, etc. What's the best way to disable it or make it more like Ubuntu where it's pretty much permissive of everything. Common Apps I use - I haven't checked the repos, but at the least I use the following (some I know work, but I can't remember the specific ones I want to know if I need to compile or if it's in the repos)
a - Snes9x
b - PCSX Reloaded
c - KeepNote
d - libdvdcss2 and libdvdread4
e - MP4, MP3, AVI, MPEG, OGG, OGV codecs (I think I've converted any others like WMA and WMV... wait I have a few WMA files, crap)
f - Flash 64-bit - this one I have issues with SELinux wise, (reason for first question)
g - VirtualBox - it runs so much faster under Fedora so I know this one works
h - Sun Java
RPMs - Fedora uses RPMs right? Is there like an DEB Alien to convert DEBs to RPMs? Apache2 - Now maybe I found this as httpd or lightppd or something, but why isn't it listed as Apache2 in the repos? I'm more or less guessing that Fedora is not a "rolling" release, is there a variant or version that is or a repo I can enable? A software center, other than Synaptic; I'm pampered when it comes to Ubuntu Software Center and that, is there anything like that in Fedora that isn't Synaptic? What's the terminal command for installing packages, is it zypper or is that OpenSuSE?
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
the following message appears after I enter the root password.
/usr/lib/YaST2/bin/y2controlcenter: symbol lookup error: /usr/lib/YaST2/bin/y2controlcenter: undefined symbol: _ZN9QListData11detach_growEPii
It doesn't launch from the root console, either. But, the text-based YaST works fine. I assume that something went wrong after my last system update. which package I need to downgrade, to get things working, again?
I'm using openSUSE 11.4 64bit (KDE). I enabled Index of /source/distribution/11.4/repo/oss repository through YaST2 but it is empty and I can't see any source rpm file in YaST2. I even delete that repository and add it again but still empty. I open the link in firefox and it's not empty or invalid link.
Code:
# zypper lr -d .....
For the past several days I have been getting a notice to update but then when I try to, get the following notice of a dependency problem:
I am running 11.4_64 with KDE 4.6.1 update. How do I clear this?
Is there a way to know the size of a package in YaST2?I only have 50MB left in my root partition / (Btw, my /home is in a separate partition.) and I'm looking for a way to selectively delete package depending on it's size. Also, when we "remove" a package in YaST2, is it "completely" removed? or is there some residual rpm left? (of course /home/configs would be kept as it is an expected behavior).
View 5 Replies View Related11.4-KDE4.6.5 32bit install,,,perhaps it is the normal way now, but it was new to me: Opened Yast2 Partitioner module, and attempted to set up an extended partition on space unallocated of sdb. Went thru the steps to create and hit finish, immediately i get a kdesu authorization dialog and yast2 Partitioner disappears/crashes. entry in var/log/messages:
Aug 22 09:08:25 blkdragon polkitd(authority=local): Operator of unix-session:/org/freedesktopConsoleKit/Session3 FAILED to authenticate to gain authorization for action org.freedesktop.udisks.filesystem-mount-system-internal for system-bus-name::1.38 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:blkdragon) so, does this mean I have to set up udisks/polkit rules for using the Partitioner? Yast2 was not considered in the default polkit rules for the install?
I don't know why but sometimes zypper (v1.4.5) removes some of the installed packages before upgrading them.
Actually it removes it even before downloading a newer version. I just wonder what a stupid f**k implemented this behavior. I wish something awful happens to him.
An hour ago I tried to update few packages, among those were sysconfig, firefox and yast. Guess what? Zypper removed those before downloading newer versions. Due to a temporary network connection loss zypper could not download packages and quit leaving me without firefox, without yast and, what's even worse, without sysconfig package which contains essential system scripts such as ifup, ifdown etc (so my network went down completely without a possibility to restore). It's a big luck there was no new package of rpm (or it would be removed by zypper too) so I could just download those packages with my second PC and reinstall them from a memory stick.
Now I'm interested where should I file this bug, because without a doubt it's a critical one.
OpenSuse 11.2 AMD64
My question - how can I use Zypper to do the job of PackageKit ? That is, install security and recommended updates. If possible, I would like to then remove PackageKit. Do you see any problems ?
Yesterday I performed a zypper up on my system. Stock KDE4 that comes with 11.3. After I restarted the computer, it would get about 4/5 the way through the progress bar that displays when first starting then lock up hard. Starting in safe mode works. With a little experimenting I found that typing x11failsafe to the boot up options line let me start without a problem also.
The sleazy workaround would be to add that parameter to the grub menu, but I'd rather have a real fix. Has anyone else seen this issue? Is there a fix for it?
[Code]....
updating via Zypper. Recently I decided to do all the system updates via Zypper, because I trust Zypper more than the other update mechanisms. since 2 days I always get the following message in the terminal, when I do
Code:
zypper up
Code:
The following package updates will NOT be installed:
gstreamer-0_10-plugins-base kcm_gtk kdebase4-openSUSE
kdebase4-runtime-branding-openSUSE kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE kdm-branding-openSUSE kio_sysinfo
[code]....
the packages mentioned in there are always the same, but I am more concerned about this message in general. In Ubuntu (which I used before) and in Debian, such a message meant, that you have to install some additional packages to resolve dependencies.
Code:
apt-get dist-upgrade
with this command the system installed the required additional packages and afterwards the packages which were listed as "will not be installed" so does this message in Zypper mean the same? Can I also do something like a "dist-upgrade" in OpenSuse, without bringing the whole system to (for example) 11.4, but to get all the updates including some new dependencies?
I'm upgrading from 11.2 RC1 to the final release.
I searched here, but didn't find much in the way of tutorials. This page was the best I found: Upgrade openSUSE
That page indicates that I only need to run
Code:
zypper dup
Very simple, but is it complete?
Thinking it is not that simple, I put together my own list of steps and I'd like some feedback on whether all this is necessary. In particular, is it necessary to run zypper dup outside X? Are my steps too complex?
sudo -s
zypper lr --export backups/repos/foo.repo
zypper ref
zypper in zypper libzypp (nothing to do)
[Code].....
I solved that by going into yast and disabling the CD-based repository. How do you do this in zypper when the error message doesn't tell you the name of the offending repository? That error could be very confusing to someone who didn't realize that a CD-based repository would be responsible for this.
When I start yast2 it seems to hang at around 50% (the lower progress bar) while refreshing the repositories. It can sit there for a minute before moving on. Once yast2 has started and I add / remove repos the refresh happens very quickly. It's only when starting that it gets stuck.
This is something that really only started after I upgraded to 11.2. In 11.1 the progress bar would move cross quickly and you could see the various repos flashing up above the progress bar. I didn't bother with it too much but it's starting to annoy me now. It also sometimes just hangs there permanently and I have to abort it.
I've tried unconditionally updating the yast stuff but it hasn't helped. My network connection is fine and I have now problems or speed issues with browsing the repo urls from a browser.
I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
View 9 Replies View RelatedI'm using the yast2 gui interface to configure apache. I think its called yast2_http_server. I added one website with *:80 set as the virtualhost ID. When I go to add a second website with the same thing, it errors out with: The IP address is already configured on another virtual host: *:80/mydomain.com. I have another opensuse box with many websites in apache configured this way.
View 1 Replies View Relatedif I open Yast2 via SSH I see the garbage (code page related issue; similar to this). If I set some other than UTF-8 in PuTTY (KOI8-U, iso-8859 etc) Yast looks good, but then the same problem appears with Midnight Commander. How can I have Yast to use 'right' UTF-8 instead of any legacy code pages? Or how better deal with the situation?
View 2 Replies View RelatedI'm trying to get yast2 to default to the QT interface. I have used these instructions but each time I run yast from the KDE launcher it still uses the GTK interface. I have also checked that the Yast2-qt package is installed. And have rebooted after setting it up, but it has still not worked.
I know it can work as if I run in konsole /sbin/yast2 it uses the correct interface?
Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.
So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.
I have a problem with the runlevel editor. It hangs at 28 per cent when initialising the runlevels. (Process: y2base runlevel qt). It used to work fine, probably until.I installed an update recommended by yast, including a new kernel. I did not immediately reboot after installing the new kernel but used the runlevel editor, which has hung since then.I've tried a reboot without success.Does anyone know what I could do to get this running again?
View 7 Replies View RelatedI have problems with running Yast2 under Gnome when I connect via VNC to the computer. The first 20-30 times it worked, but then it simply stopped to work. When switching to another VNC-Server (instead of :1 to :2) it works again for approx. 20-30 times. The behaviour is very much similar to the one described here:
Yast2 startet nicht unter VNC (SUSE 11.1/Gnome)
I use OpenSUSE 11.2 with german language set. The VNC server I use the one that is installed "by default".
When I try to run Yast2 from a terminal under Gnome as normal user I get the following output:
./yast2: Zeile 30: ./lib/YaST2/bin/yast2-funcs: Datei oder Verzeichnis nicht gefunden
./yast2: Zeile 267: set_lang_from_sysconfig: Kommando nicht gefunden.
./yast2: Zeile 192: check_qt: Kommando nicht gefunden.
Qt GUI wanted but not found, failing back to ncurses.
[Code]....
11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?
View 1 Replies View RelatedNew to opensuse, trying to set up cache proxy and webfilter at a highschool. I have a new install of opensuse11.2 64bit installed as server. Installed squid3 stable. Trying to configure it in yast2. Now in yast2-->networkservices-->squid I get the message squid needs to be installed, continuing with Next I get message unresolved dependencies then another that squid3 conflicts with squid-2.7. Solutions offered are deinstall squid3 or don't install squid-2. I select the latter and get messages that yast might not function etc. Isn't squid3 the newer version of squid-2? Should yast2 recognize that?
View 3 Replies View RelatedI added Index of /repositories/KDE:/Backports/openSUSE_11.2 The opensuse.org says: If you just want the latest versions of e.g. amarok, digikam etc. you don't need to upgrade all of KDE, just add the Backports repo maintained by the openSUSE KDE Team. I want to update the Amarok to the new version (2.3) with zypper but I cant.
[Code]...
the zypper calling aria2c download the file, but the speed is too slow, so, I want to use proxy.the aria2 is supported to use proxy ,but I cannot find where is the config file. I want to know how the zypper pass the parameter such as file name file target and anthor option when aria2 is calling by zypper
View 9 Replies View RelatedI just got my repos back on the track. I looked for the eclipse platform in 'Yast->software management', still like 8 choiches to make. Can I use zypper again to install 'Eclipse'?
View 4 Replies View Related