the zypper calling aria2c download the file, but the speed is too slow, so, I want to use proxy.the aria2 is supported to use proxy ,but I cannot find where is the config file. I want to know how the zypper pass the parameter such as file name file target and anthor option when aria2 is calling by zypper
View 9 RepliesI don't know why but sometimes zypper (v1.4.5) removes some of the installed packages before upgrading them.
Actually it removes it even before downloading a newer version. I just wonder what a stupid f**k implemented this behavior. I wish something awful happens to him.
An hour ago I tried to update few packages, among those were sysconfig, firefox and yast. Guess what? Zypper removed those before downloading newer versions. Due to a temporary network connection loss zypper could not download packages and quit leaving me without firefox, without yast and, what's even worse, without sysconfig package which contains essential system scripts such as ifup, ifdown etc (so my network went down completely without a possibility to restore). It's a big luck there was no new package of rpm (or it would be removed by zypper too) so I could just download those packages with my second PC and reinstall them from a memory stick.
Now I'm interested where should I file this bug, because without a doubt it's a critical one.
OpenSuse 11.2 AMD64
My question - how can I use Zypper to do the job of PackageKit ? That is, install security and recommended updates. If possible, I would like to then remove PackageKit. Do you see any problems ?
Yesterday I performed a zypper up on my system. Stock KDE4 that comes with 11.3. After I restarted the computer, it would get about 4/5 the way through the progress bar that displays when first starting then lock up hard. Starting in safe mode works. With a little experimenting I found that typing x11failsafe to the boot up options line let me start without a problem also.
The sleazy workaround would be to add that parameter to the grub menu, but I'd rather have a real fix. Has anyone else seen this issue? Is there a fix for it?
[Code]....
updating via Zypper. Recently I decided to do all the system updates via Zypper, because I trust Zypper more than the other update mechanisms. since 2 days I always get the following message in the terminal, when I do
Code:
zypper up
Code:
The following package updates will NOT be installed:
gstreamer-0_10-plugins-base kcm_gtk kdebase4-openSUSE
kdebase4-runtime-branding-openSUSE kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE kdm-branding-openSUSE kio_sysinfo
[code]....
the packages mentioned in there are always the same, but I am more concerned about this message in general. In Ubuntu (which I used before) and in Debian, such a message meant, that you have to install some additional packages to resolve dependencies.
Code:
apt-get dist-upgrade
with this command the system installed the required additional packages and afterwards the packages which were listed as "will not be installed" so does this message in Zypper mean the same? Can I also do something like a "dist-upgrade" in OpenSuse, without bringing the whole system to (for example) 11.4, but to get all the updates including some new dependencies?
I'm upgrading from 11.2 RC1 to the final release.
I searched here, but didn't find much in the way of tutorials. This page was the best I found: Upgrade openSUSE
That page indicates that I only need to run
Code:
zypper dup
Very simple, but is it complete?
Thinking it is not that simple, I put together my own list of steps and I'd like some feedback on whether all this is necessary. In particular, is it necessary to run zypper dup outside X? Are my steps too complex?
sudo -s
zypper lr --export backups/repos/foo.repo
zypper ref
zypper in zypper libzypp (nothing to do)
[Code].....
I solved that by going into yast and disabling the CD-based repository. How do you do this in zypper when the error message doesn't tell you the name of the offending repository? That error could be very confusing to someone who didn't realize that a CD-based repository would be responsible for this.
I added Index of /repositories/KDE:/Backports/openSUSE_11.2 The opensuse.org says: If you just want the latest versions of e.g. amarok, digikam etc. you don't need to upgrade all of KDE, just add the Backports repo maintained by the openSUSE KDE Team. I want to update the Amarok to the new version (2.3) with zypper but I cant.
[Code]...
I just got my repos back on the track. I looked for the eclipse platform in 'Yast->software management', still like 8 choiches to make. Can I use zypper again to install 'Eclipse'?
View 4 Replies View RelatedWhile trying to update my kernel as written here, "zypper up" hanged at retrieval.
The first row is where it hanged:
Code:
Retrieving: libpng12-0-32bit-1.2.39-2.2_2.3.1.x86_64.delta.rpm [error (0 B/s)]
Download interrupted by user
Abort, retry, ignore? [a/r/i/?] (a):
[Code].....
Turned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.
Whatever I tried to download & install displays an error message
Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.
I'm running 11.2 64bit KDE 4.4.3
I installed R using zypper some time back, but then I read that I should have used a specific repository called Rpatched. So (note order) I added the repository, then remove R (called R-base) and then proceeded to install the package. Clearly in my repository list there is more than one source of R. Should I have removed the package first and then add the new repository? How in fact does zypper deal with different repositories when they all have the same package? I expect it might choose the most recent version. But what happens when the packages are patched? How does it determine the best version of the package to use?
View 1 Replies View RelatedWhen would the zypper service be dead for openSUSE 11.2?
View 2 Replies View RelatedI added ettercap repo Index of /repositories/home:/bastianfriedrich/openSUSE_11.3 and I want to install 32-bit ettercap. But these commands fail:
Code:
# zypper install "ettercap-ng.i586"
# zypper install ettercap-ng.i586
# zypper install "ettercap-0.7.3-9.1.i586"
# zypper install "ettercap.i586=0.7.3-9.1"
Is it possible to add repositories from NFSv4 to zypper? I have initiated automatic mounting network resources on NFSv4 and it works fine, but after adding repository from NFSv4 to zypper, I have problem on refreshing repository data:
Code:
omega:/distrib/repositories/1 # zypper refresh repo-update-1
Retrieving repository 'repo-update-1' metadata []
[code]....
On my openSuSE 11.4 with GNome, zypper throws lots of errors when used on the command line.However, zypper does it's work correctly, but the error messages are annoying.Does anybody know what the problem is ?The error messages:
Code:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error ==
[code]....
I was curios about why zypper up don't update some packages as in code...
View 2 Replies View RelatedI don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies View RelatedI just run
Code:
zypper dup
on my 11.2 box. Apparently it did ok, but I can't see any change. How can I check if I have 11.3 now?
So I did zypper dup yesterday, because I have been a having a ton of freezing issues with this 11.3, and now after a restart I get the green lizard loading screen and then, when it seems like it's about to load KDE all I get is a black screen with a cursor.
It will boot up in failsafe mode just fine. I just rolled back to an older kernel but still same issue, what should I do now?
This laptop has a Intel 945 graphics card
I recently updated my girlfriends laptop (and my own) to KDE 4.4 (using the Factory repository). I am also using some additional repositories like PackMan.
I recently read on this forum, that the updater-applet is only updating from the main repositories (the ones set up after install). I would like to update from all updates periodically using "zypper dup".
I read somewhere else, that cronjobs are used to run scripts based on schedules. how I could run "zypper dup" with a cronjob and preferably under root, so I dont have to type the password every time?
I want to run zypper without being asked for the root password. So I added the commands to the sudoers file:
Code:
# User alias specification
User_Alias ADMIN = XXXX #note: this is not real username.
# User privilege specification
root ALL = (ALL) ALL
ADMIN ALL = NOPASSWD:/usr/sbin/vpnc ,/usr/sbin/vpnc-disconnect ,/usr/bin/zypper ref ,/usr/bin/zypper up
But I'm still being asked for password. I should note the the vpnc commmand is working as expected.
I get the following error after installing a package. I believe this occurred because zypper attempted to update libxml2 to meet package dependencies.
Code:
Is there any way to manually update the package database to solve this problem?
I might switch to OpenSUSE from Debian, but I have my doubts still about package management with OpenSUSE. I'm glad to see that zypper now has the --clean-deps option. Is there a YAST GUI for this as well? I don't like the command line very much. Additionally, is there any way to remove a package with all its config files? In Debian with the Synaptic front end, you can right click on package and click "remove" and it will just uninstall the package but leave its configuration files intact.
But if you select "Completely Remove" it will remove all the configuration files so that if you later install the package again it will use the default settings once again. Is there any way to do this with OpenSUSE? Again, I'd prefer a GUI. Does 11.3 offer Delta RPM updates, and are there many repos that offer delta RPMs? Does Zypper cache downloaded packages by default? And using the YAST package management GUI are packages caches by default? If so, where? Does the YAST GUI try to refresh the package cache all the time, or can I do it manually?
What's the zypper command to rename a repository name? Not yast.
View 6 Replies View RelatedISTR seeing that
% zypper up -t package
was the equivalent of
YaST | Software Management | Packages | All Packages | Update if new version
available
(without SuSEconfig of course) is this the case, if not, what is the equivalent zypper command?
Is there a command that I can use to find out what are the dependencies of a given package.
View 4 Replies View RelatedZypper seems unable to reach the openSUSE servers. I am currently on a network that may or may not block certain traffic, so I don't know if their firewall is in the way. I am able to browse the web without any problems. Sometimes Zypper downloads proceed eventually, but the download is doggone slow. I did this code...
Apparently Zypper has trouble downloading this URI, but if I open it in Chrome it loads perfectly without any problems. How can I find the root of this problem?
when i turn on my box (opensuse 11.4) i have the apper applet and packagekit trying to update packages, often times it 's not working for dependencies are missing or stuff like that, but this is impeding zypper to work at the same time ( PackageKit is blocking zypper. This happens if you have an updater applet or other software management application using PackageKit running.). Packagekit is busy thus can't be exited ...Is removing packagekit going to disturb zypper or not ?
View 5 Replies View RelatedI have minimal open suse installed as a server and now i would like to install some packages with zypper and it always download some packages related to X11 and gnome but I want to ignore that.Is it possible some how that I can define a USE flag for that like -X -gnome?
View 1 Replies View Related