I have just bought a new Intel Mac Mini,and I wanted to have an openSuSE slice.But I use a MinidisplayPort-VGA adapter to plug my display, and I wanted to know if the Mini Display Port interface was supported.In fact, I have already tried to install FreeBSD but my screen (VGA), more surely the interface (Apple MDP) wasn't recognized.
View 1 RepliesI have the following problem: syslog is constantly writing to disk, because the kernel spams these messages
Code:
Apr 4 14:14:56 aspire kernel: [138498.252610] display port opened
Apr 4 14:14:56 aspire kernel: [138498.299755] display port closed
Apr 4 14:14:57 aspire kernel: [138499.328206] display port opened
Apr 4 14:14:57 aspire kernel: [138499.371835] display port closed
Apr 4 14:14:58 aspire kernel: [138500.452671] display port opened
[Code]...
I'm trying to install Fedora10 on my new desktop. It has Windows 7 beta on it and Vista. It starts up fine and I select install. For some reason my wired usb keyboard will not respond unless I press the caps lock button while it loads the begging. (I don't know if another button will work, ive only used the caps button since i can see the light come on) once it loads i skip the disk check and anaconda runs, i get the warning (mini-wm:1462): Gtk-WARNING **: cannot open display: :1 .
View 1 Replies View RelatedI recently got a Canon Powershot SD780 IS. It takes HD video at 780p. It's great, except that the videos won't display properly in Ubuntu Netbook Remix (Lucid) on my Dell Mini 10v.I've tried using Gstreamer (Banshee), Xine (Totem-xine), and MPlayer (GNOME MPlayer). These all should have worked, which makes me think something may be wrong either with the files themselves or my computer. Anyone have any idea what's going on here?FYI, when I pull up the Properties dialogue for one of the videos and look in the Audio/Video tab, it says:
Video
Dimensions: 1280 x 720
Codec: H.264 / AVC
[code]....
we recently had to upgrade all machines from 10.3 and 11.1 to 11.2 because of software compatibility issues.
Now that 11.2 is up and running I keep having very annoying problems:
.Xauthority
User home directories are mounted with NFS. When trying to use kdesu (e.g. to start YAST) lock files (.Xauthority-*) are created and the program fails. The pnly solution is the remove the files by hand and try again. Sometimes it will work and swomtimes it won't. Interestingly that only happens on the local machine; ssh -X some.other.machine works fine.
YAST
[Code]...
I am considering an OCZ RevoDrive SSD that takes the form of a PCI-Express x4 card. I have not been able to find compatibility or support information for Linux, though apparently it works OK under Windows 7. I want to make this a system / boot drive.
View 3 Replies View RelatedI am looking into buying a cheap netbook and saw the Datawind Ubi-Surfer (e.g., Datawind Ubi-Surfer Netbook | [URL]). It comes with a pre-installed Windows CE which I will be keen to erase as soon as possible.
The spec is low, as can be expected: 128Mb ram (1GB flash), no optical drive (which poses the question of how to install openSUSE), but 3xUSB and ethernet are included.
I do not intend to use it for any processing. It is to run java applications and play music from an external USB hard drive.
Does anyone know whether this little box can cope with openSUSE 11.2 (or 11.3)? and if so, how do I install it without an optical drive?
I have seen a lot of threads here and on others forums about problems with these models. I have a regular seagate portable that works great. The threads are all 2009 and older, so I was wondering if anyone could confirm that the free agent go portable models work before I buy one. Especially with 11.3. I can get a 640GB for $99.
View 3 Replies View RelatedI have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 2.6.27.7-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.
View 1 Replies View RelatedI'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
[Code].....
In SuSE firewall0. I do have a openSuse 11.4 and multiple IP addresses on eth0 interface
I run (trying to/have to) multiple TOMCAT servers.
I am trying to have each tomcat instance listen to on separate IP address for example:
What i am trying to do is to redirect
a) tomcat 1 -
a) tomcat 2 -
And so on.
I know that it has to be possible.
I do have just eth0/
Is is it possible. Do I have to create "vittual interfaces"? eth0:1, .......... and do redirection ?
"Server" has got just single interface - just 1 ethernet calbe goes to that server. I am planning to have 10-15 tomcat's on that server (I have to unfortunatley) and each has to run on port 80
Is it possible to "grant" permissions to normal users to run app on port 80 - that would solve me lots of problems if impossible to redirect.
I tried to setcap 'cap_net_bind_service=+ep' /path/to/tomcat ...... but no luck
Acer Aspire 5820 TimelineX, Mobility Radeon 5650, running open source radeon drivers. Laptop has VGA output (haven't tried it yet, will later tonight, I suspect it works) and an HDMI output. Monitor connected to laptop through HDMI causes garbled picture (either a set of lines made of little square blocks or a pink vertical line running down the leftmost edge with white, dashed horizontal lines travelling up the screen from the bottom to the top and repeating). The previous happens at startup, the latter happens if I disconnect the monitor and plug it back in again after logging in.
Running KDE 4. HDMI port is not detected (does not show up in gnome-config-display or in krandr or in xrandr). It does show my laptop's built in screen and my VGA output, but does not list my HDMI output anywhere. HDMI seems to show up in a message in dmesg, but other than that, no.
Included is the output of a few commands. All commands were run with the monitor plugged in to HDMI. 'monitor-probe-using-X radeon' failed with "Unrecognized option: -probeonly". Monitor does not display anything if plugged in on startup (some people got something, then it disappeared when X started). I haven't played with Xorg.conf yet, I'm not sure what to write for HDMI output. I haven't tried the fglrx drivers yet ((*shudders*)). I can't get any info on this problem, other people have had similar issues but they had trouble with getting a particular resolution to work or no sound through HDMI. I don't care about sound, just want a picture. Monitor is an LG Flatron L246WH. I can use VGA if push comes to shove, but I'd really like to get HDMI working.
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
View 2 Replies View RelatedI have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
View 3 Replies View RelatedI'm interested to buy an usb print server for my HP C4480. Before spend money I prefer to be sure to choose the right device. My printer is HP Photosmart C4480 an it works perfectly with Opensuse (my version is 11.3).
I've seen on ebay a very cheap one, but it seems just mac/windows and compatibile. I need your advices and your experience to know which device could be suitable for my situation. I don't want to spend too much money, not interested in brands but just in something that works.
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
Making new computer a few questions Case Newegg.com - GIGABYTE GZ-SPIM51-P0B Black 0.6 mm SECC / ABS Mini-ITX Desktop Computer Case 65W adapter Power Supply motherboard/CPU Newegg.com - ASUS AT3IONT-I Deluxe Intel Atom 330 PBGA437 NVIDIA ION Mini ITX Motherboard/CPU Combo
Ram Newegg.com - G.SKILL 2GB (2 x 1GB) 240-Pin DDR3 SDRAM DDR3 1066 (PC3 8500) Dual Channel Kit Desktop Memory Model F3-8500CL7D-2GBNQ DVD-RW Drive 5.25 Hard Drive 3.5 250 GB IDE Question 1: Do I meet all of the power requirements for this setup? Question 2: Could I switch to the non-delux board and run off the 65 watt stock power supply?
Question 3: If I go with the deluxe board how do I power my hard drive and dvd-rw? Question 4: What kind of hard drive should I put in it, I am only going to use it for openoffice documents, pictures and internet, and netflix.
Here's my problem:
New HP Mini 110. Atom N270. 2Gb RAM. 160Gb HDD
I've installed OpenSUSE 11.2 Gnome Live from a USB stick. The installation worked well, but after the first reboot, the graphical loader just hangs with the progress bar having moved only a couple of pixels. Only way to recover is to power-off - CTRL+ALT+DEL does nothing.
When I press 'Esc' on boot, to display the boot messages, I see the boot hangs at the following point:
"Loading drivers, configuring devices:"
trying again, this time adding the boot option "acpi=off" as recommended in another thread, gets me a little further, but the boot now fails at the following point:
"Set System Time to the current Hardware Clock"
Finally, booting in Failsafe mode gets all the way to a text mode login, but this is hardly a long-term work-around.
Has anyone got openSUSE 11.2 working on an HP Mini 110, or at least seen and solved this problem on another system? I can confirm openSUSE 11.2 works fine on my old Acer Aspire One A150, so I assume this is a specific issue on the HP.
I've managed to install openSuse 11.4, and have also managed to get the sound working properly, but the mic doesn't seem to be working.
My system is a hp mini 110 3000 netbook which came pre installed with windows 7. I'd install ubuntu on this before switching to openSuse, and in ubuntu the mic was working.
Also, I can't get bluetooth and the sd card reader working. I've got the ath9k driver installed, and WLAN works perfectly on that, but bluetooth doesn't.
I can't get WLAN up on my Dell Mini 10v (BCM 4312)/openSUSE 11.3/LXDE. And yes, I have thoroughly read iwfingers's 'Getting your Wireless to Work'. After installing openSUSE 11.3 ifconfig can see eth0, l0 and wlan0. No WLAN running. dsmesq|grep firmware prompts me to '/usr/sbin/install_bcm43xx_firmware"
After having done that and reboot ifconfig can only see eth0 and l0. Installing broadcom-wl-5.60.48.36-7.pm.16.4.i586.rpm broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm (current ones from Packman) does, Shall I try to install the drivers without installing the firmware first?
Why does broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm install a new default kernel? Ubuntu Netbook Remix 9.04 had no problems with WLAN.
A few months ago, I got one of these and it is great for travel. I had to buy Norton for it and now the trial MS Office has expired which burns me. MS Windoze 7 Light is an adventure plus all the other bundled useless (to me) HP stuff.I use SUSE Linux 11.2 on my main mail/internet desktop and I like it a lot so I have been thinking about swapping the hard drive out of the HP Mini and loading 11.2.
Has anybody done this? I've searched but haven't turned up any threads about this. I'm a newbie so maybe I need to be pointed?Maybe there is a more suitable Linux distribution but I only know SUSE and am ok with it.My HP is a Mini 210-1000 if that is relevant.
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
I just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE.
This one contains a Broadcom 4312 WLAN card
Code:
lspci -vnn|grep Broadcom
07:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
0b:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1615]
Subsystem: Broadcom Corporation Device [14e4:1615]
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
How can i install drivers for Dell Wireless 1397 802.11b/g Half Mini Card.I'm using openSUSE x86_64 on my Dell Inspiron 1440.
View 6 Replies View RelatedI have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedMy wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
I'm going to buy a new 11n wireless card for my laptop.I have narrowed my choices down to two:
HALF SIZE ATHEROS 802.11n AR9287 Mini Pci express card on eBay (end time 06-Jan-11 15:07:37 GMT)
OR INTEL 5100 Wireless Half Mini PCI-E Card 512AN_HMW G/N on eBay (end time 10-Jan-11 03:16:53 GMT)
My questions are:
Which is better spec?
Which has better compatibility with Linux?
Which is newer?
Which of these would allow packet injection with backtrack?
I am ofcourse running openSuse 11.3 on a HP 311c (wicked btw!).
clementine-player - Project Hosting on Google Code
I'm missing a dependency, would like to try this out...anyone know of a oSuse build? or repo?