OpenSUSE Hardware :: Configure The Touch Sensitive Volume Level Control?
Feb 23, 2010
I have a acer aspire 8735G-6502 this bad boy [URL]: Acer Aspire 8735G-6502 18.4-Inch Widescreen Laptop: Computer & Accessories I am trying to figure out how to configure the touch sensitive volume level control. It works somewhat, but only increasing volume. Xev does a strange job detecting the key codes, and assigning keyboard short cuts does the same thing. In fact when moving ones finger in a downward, volume decreasing motion it picks up only strange upward finger motion.
View 3 Replies
ADVERTISEMENT
Apr 10, 2011
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
View 3 Replies
View Related
Dec 13, 2009
I'm running a Fujitsu Lifebook T5010 with Linux Fedora Release 12 and the mouse is way too sensitive, jumps all over the screen when I touch it, especially if 2 fingers touch at the same time. I've tried all the system settings and nothing helps. It works fine with Windows XP Professional.
View 2 Replies
View Related
Oct 29, 2009
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
View 7 Replies
View Related
Mar 7, 2011
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
View 3 Replies
View Related
Jul 2, 2010
After login is always volume level set on 100%. Alsactl store and restore works properly. Manually run: sudo /etc/init.d/alsasound reload reset volume level into proper level, but after login to Gnome is always volume level 100%,Here are some logs:
rpm -qa '*alsa*'
alsa-utils-1.0.21-3.1.x86_64
alsa-firmware-1.0.20-3.2.noarch
[code]....
View 1 Replies
View Related
Jul 20, 2010
I did a clean DVD install of 11.3 instead of the upgrade. I'm using a 64 bit Panasonic CF-52 Toughbook with a 250 Gig removable drive. I have noticed on 11.3 that the on-screen volume control applet is gone! It was right next to the battery and the WiFi indicators on 11.2 but it is gone with 11.3.
Now what ever you listen to is FULL BLAST! It makes you go back to the desktop and use the hardware adjusters on the laptop. Even the usual keyboard key combos are not responding. It can be embarrassing especially in quiet, public settings.
View 2 Replies
View Related
Nov 14, 2009
I normally run KDE, but installed GNOME as well on my netbook (running openSUSE 11.2) to try out. However, I noticed there is no longer any volume control applet. The GNOME panel control is labeled 'deprecated', and the volue Fn keys, which work fine in KDE, do not work at all. I tried launching the PulseAudio Volume Control app, but it gives me a "Connection Failed: Connection Refused error". I still have sound, and I can adjust the volumes in alsamixer, but is rather inconvinient. What is the "right way" to adjust volumes in 11.2's GNOME?
View 9 Replies
View Related
Apr 27, 2010
Not sure how/when/why it happened the volume control app on my control panel is missing. I tried adding it by doing a "Add to Panel" but the volume control app says it is now deprecated.Is there any other way to change the volume quickly instead of having
to open pulseaudio volume control
View 7 Replies
View Related
Sep 4, 2010
Is there any way, native or within download, of changing audio volume on a per-application basis? I vaguely remember doing this in the vista basic that was installed on this when I got it a couple of years ago, but was removed after a couple of months due to instability. I'd like music streaming thru VLC louder relative to games being played thru Adobe Flash in Chrome (which are at 100% of possible, 100% of the time, no options other than mute).
View 5 Replies
View Related
Dec 2, 2009
I am having with my openSUSE upgrade.
I followed the upgrade directions, found here, precisely. However, I am still experiencing some unusual problems, some I think I have resolved, but others are leaving me puzzled.
Before I get to far into this, my working knowledge of *NIX platforms is decent, but I am no where close to expert or advanced.
Problem 1 - KDE Profiles (resolved)
The first problem I experienced was that my KDE profiles were all screwed up, buttons would not work, desktop icons were missing, applications would not start or would show horrid graphics, and the list goes on. Having run through a similar problem with FreeBSD, I decided to simply move my ~/.kde4 to ~/.kde4.orig and then do a forced reinstall of KDE4. This seems to have resolved the issue, I just have to recreate my profile, which should be relatively simple.
Problem 2 - Sound Driver
Shortly after my upgrade, I did have sound, but I had lost control of the volume. This is somewhat expected as with each Kernel update of Linux, I found I had to reinstall the sound drivers, Creative X-Fi. This never presented a problem as it was a 30 second process and very simple to perform (there were three commands, four if you include 'su -'). This time, I ended up running into an error, seen below:
Code:
This brings me to my third problem...
Problem 3 - VMware
Similar to the sound card, each time a new Kernel patch is applied, I have to recompile VMware Workstation 6.5 for it to work again. This is even simpler than the sound drivers as all I do is start VMware and it automatically recompiles. Now, when I go to start it, I receive the two following errors:
This appears upon trying to start VMware Workstation...
This appears when I click 'Install'...
Problem 4 - Kernel...
The previous two problems seem to be related to some underlying kernel issue that I have yet to be able to resolve. I have barely been able to change the error messages. So far I have forced a reinstall of almost everything kernel related that was already installed, plus I installed quite a few *-devel packages. I reinstalled 'make' and 'gcc' for good measure, but I am not getting anywhere.
View 9 Replies
View Related
Jun 10, 2010
I own an ASUS G71V laptop and I run openSUSE 11.2 with latest kernel and patches.
I just tried to use Fn+F10/F11/F12 combinations to regulate volume, just to see if they work.
I found that (from KDE 4.4.3) I can see the pop-up volume indicator going up and down as I press the right combination.
Ok... unfortunately, hardware keys regulate the wrong volume slider as I can see by opening Kmix. The front-microphone channel instead of master is regulated.
Actually, I just found that if I click on the volume icon on the taskbar I get the front mic slider, which seems to be bad.
How can I tell KDE that the default channel is the "master"?
View 1 Replies
View Related
Sep 4, 2010
I have my Acer Revo R3610 PC connected to my LCD TV through HDMI. The sound works but I cannot control the volume from Kmix. I've added the IEC958 channel to the channels in Kmix but it doesn't provide a slider for it. Only a mute. The master volume slider has no effect at all. Is there any way of controlling the volume when connected through HDMI?
I ran the alsa diagnostics script (/usr/sbin/alsa-info.sh) and uploaded it here.
Here is a quick summary of my Alsa version, sound module loaded and sound card details.
Code:
mediacentre@mediacentre:~> cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
mediacentre@mediacentre:~> cat /proc/asound/modules
0 snd_hda_intel
mediacentre@mediacentre:~> cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 20
View 7 Replies
View Related
Dec 25, 2009
I am currently using openSUSE 11.2, and I just got a Logitech Clearchat Pro USB headset for Christmas. Like the average Linux n00b, I just plugged it in and hoped it would work like normal. Well, at first it did work, but the volume was very quiet. The headset also controlled the system's volume controls (pressing up/down on the right headset would raise/lower the volume on the system itself, not the headset). So I went to YasT2. Added the headset as a second sound card. Configured the volume.
However, I noticed now the volume icon on the System Tray has completely disappeared. Pressing up/down on my keyboard's vol. controls no longer works, nor my laptop's built-in volume dial. Did I completely destroy any chance of changing the volume from outside of YasT2? I set it to "auto config" the Logitech headset, I thought it was safe since it recognized it as the right 'set. Someone, please help me. I'm sure you all know how much of a hassle it is to open YasT2, type in the root password, and configure your sound card just to change the volume.
I just held down the volume up again on the headset, and all of a sudden my cursor just started shaking like an earthquake passed by, and I could see the blue highlight around the form flicker.
View 9 Replies
View Related
Aug 8, 2010
I don't shutdown my OS really often and sometimes the driver of my soundcard seems to crash so I need to restart it. I use the command "rcalsasound restart" which works well or "/etc/init.d/alsasound restart" but I lose the volume control during the operation. Moreover, I have a dell laptop with sound keys and naturally it doesn't work to. Do you know how to restart the volume control applet? And I'd like to know why these commands don't start also the volume control (I'd like to know a bit more how it works).
View 2 Replies
View Related
Jul 15, 2009
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies
View Related
Jul 17, 2010
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Sep 9, 2010
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
Nov 25, 2009
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies
View Related
Jun 25, 2010
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
View 9 Replies
View Related
Feb 8, 2011
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
View 14 Replies
View Related
Aug 26, 2011
Is there any easily configured parental control tools for openSUSE? I used to use dansguardian, but I can't even find a repository with it in for openSUSE? On Mandriva there is a GUI for simple parental control (time & user based), + dansguardian is automatically set-up with squid etc. running appropriately.
View 6 Replies
View Related
Feb 8, 2011
i have ubuntu 10.10 maverick and i was wondering is there a way to do remote desktop with my ipod touch?
View 1 Replies
View Related
Jun 15, 2010
I had to reinstall 10.04 today and after installation I have found the volume level to be very low. I have to move the slider to max to get a normal listening level. It was not like this previously before reinstalling.
View 3 Replies
View Related
Apr 15, 2010
Running Suse 10.0 on a lenovo idea pad and I am having a problem getting the volume set high enough to hear any music, dialogue!. I have set the volume control up as far as it will go but can hardly hear anything. Had this problem running Ubuntu on a Sony laptop but managed to resolve the problem but cannot remember what I done.
View 2 Replies
View Related
Aug 10, 2010
I've been able to kludge a kill script which finds the correct pid for the kdeserver (or gnome server) after my system comes up in run level 5 so I can drop back to run level 3 mode. Lots of experimentation showed me that using telinit 3 and telinit 5 would occasionally leave the video memory in a mess and I would have the black screen of death.
I set the security parameter setting to autologin for me since I am the only user of my machine, but I still have to kludge the default setting under sysconfig (the DEFAULT_WM) under Window Manager to pick a certain window manager, so it takes time to manually switch the desktop.
Right now I can leave the gui and drop back to cli, but painful experimenting showed me that killing the X server is a no no. Right now I kill the kde server, which sends the SIGTERM to the X windows manager, which then figures out that it has to shut down.
Questions: Is there a better way of doing this? Apparently openSUSE figures that we have multiple users logging into the gui desktop, so the gui is always kept running and a login window with the desktop manager option forces the user to login in. With autologin, this never happens, but no choice of desktop is possible on the fly.
Can some type of script be set up to painlessly enable this to happen? And what is the best way of bringing either the Gnome or KDE desktop manager down gracefully? I do get lots of error messages as the system attempts to recover and X shuts down. It appears that apparently the single user with autologin is left out in the cold.
View 4 Replies
View Related
Feb 6, 2010
I want to install a software called TinyOS which is an operating system designed for wireless sensor embedded networks in my account. The problem is it has instructions to install the software as an administrator since i'm not an admin of the department network i can not able to install. Is there any method to install this software as an user level rather than admin level.
View 3 Replies
View Related
