OpenSUSE Hardware :: Building The Drivers And Tools From Scratch And Too Many Pages Purporting To Get Tablet Running?

Jun 6, 2010

After many days of messing around with various versions of drivers and tools, and building the drivers and tools from scratch and too many pages purporting to help get this tablet running, big breath, I have some advice. As the very first thing to check you need to look at /var/log/xorg.0.log. If the file wacom_drv.so loads you'll see:

(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules//input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0

[Code]...

View 3 Replies


ADVERTISEMENT

Software :: Tools For Building Custom Live CDs

Nov 12, 2010

I need to build customs liveCd (usb) to run a distributed application that I'm developing. I have been using debian live-helper to build debian live cds, and it's very flexible, and works. But I'm looking for an alternative to it. I have heard about fedora livecd-creator. What do you think is a better tool?: livehelper or livecd-creator, maybe about good hardware recognition, easy to use, flexibility, reliability, etc. What others good tools are to do this job?

View 7 Replies View Related

Fedora Hardware :: Wacom Drivers And Kernel Updated - Tablet Hanging

Nov 30, 2009

I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).

If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12

I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log

(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)

I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?

View 6 Replies View Related

Ubuntu :: Running Unity (3D Or 2D) On An HP TC1100 Tablet?

Apr 24, 2011

Are there any issues with running Unity (3D or 2D) on an HP TC1100 tablet?

View 2 Replies View Related

Fedora Installation :: Building RAID Drivers For 10?

Jan 22, 2009

I want to install Fedora 10 but need to build RAID (bcraid) drivers so the installation will see my RAID array. I'm currently running Fedora 6 & thought this would be the process:

1) Install kernel source
2) Modify configuration to include bcraid drivers.
3) Build new kernel
4) Replace kernel in standard build with custom kernel or load driver during installlation
5) Install Fedora 10

I'm stuck on no. 1. When I tried to install the kernel source, there was some problem with "mockbuild" (wot dat?) which I think was a red herring but I now don't know what to do about these unsatisfied dependencies:

[root@fedora6 ~]# rpm -Vp ~/Desktop/kernel-2.6.27.5-117.fc10.src.rpm
warning: /home/nick/Desktop/kernel-2.6.27.5-117.fc10.src.rpm: Header V3 DSA signature: NOKEY, key ID 4ebfc273
Unsatisfied dependencies for kernel-2.6.27.5-117.fc10.src: rpm-build >= 4.4.2.1-4

[code]....

View 4 Replies View Related

Fedora :: Using RPM Nvidia Drivers Or Building Them By Hand?

Aug 6, 2009

For a new project at work, I'm looking into building a processing farm of a few dozen Tesla 1U servers from Nvidia. This has lead us on to figure a way to let the developers run tests on their own workstations (with the appropriate gfx card).The cards we're looking at are Quadro FX 1800 or 3800's to provide quite a bit of poke.

Thing is, I'm having issues with running any Cuda code successfully on systems installed with the pre-built nvidia drivers from RPMFusion. I can only get code running if I download the nvidia or cuda drivers from nvidia and install by hand. Not something I'd like to be maintaining across all out developer workstations. Is anyone out there running Cuda on Fedora/RHEL5 platform? If so, are you using RPM nvidia drivers or building them by hand?

View 2 Replies View Related

Ubuntu :: Trust Tablet Tb4200 - Cant Seem To Move Mouse Curser Anymore Unless Touch The Pen On The Tablet

Sep 15, 2010

I m on ubuntu 10.04 and have a Trust tb 4200 tablet.. and having problems with my trust tablet runing on ubuntu.. i pluged in the tablet and to my amaze it started working right away until i pressed the pen on the tablet.. i cant seem to move the mouse curser anymore unless i touch the pen on the tablet. (wich acts as a click) so i thought that i may be missing the drivers.. i checked thes forum and there was a post to install the aptek drivers which i did (but still worked the same) and i found out thet there was no 10-aiptek.fdi (in "/etc/hal/fdi/policy/") so i created one and copied one from a post.. in [url]...3&postcount=50 but still cant move the courser without touching.. its like if it did no diference at all.. i also changed the values in the 10-aiptek.fdi with no changes.. the size of the tablet is just the size of the screen so i am using the full tablet.. and no buttons work...

I think the drivers are not workin.. in the synaptic it shows as intalled...

Code:

Code:

View 9 Replies View Related

Hardware :: Digital Tablet - Show The Pen Strokes Both On The Tablet's Display And On The Computer's Monitor At The Same Time

Mar 13, 2010

I have noticed they sell digital writing tablets that have the ability to show the pen strokes both on the tablet's display and on the computer's monitor at the same time, and I think they are called LCD digital tablets and they serve as both a second computer monitor AND a writing tablet combined in one, such as the Wacom Cintiq, and must be connected both by USB as well as with a VGA/DVI port, and you have the ability to open up a drawing application directly from the tablet such as Paint where you can draw or write on the tablet's display. And you can see what you are writing on the tablet's display. Then you save the results to a JPEG file, for example.

But I do not want a digtal tablet quite as elaborate as that. I am looking for something similar to the credit card terminals used in stores where you can sign your name directly on the display after swiping your credit card, and you can see what you are writing as you write. Then your signature shows up on a paper receipt later. Do they make digital tablets like that for the home user, and if they do, would they have to hook up to the VGA/DVI port on your video card? What are they called and where can I get one?

I've searched several online stores but they do not say if you can see what you are writing on the tablet's display. I already have a Wacom tablet in Linux but you can not see what you are writing on the tablet. I have to keep looking up at my computer's monitor to see what I am writing and proficiency is reduced as a result. And again, I do not want a tablet as elaborate as I described in my first paragraph. I want something simplier, such as the type used at a credit card terminal.

View 2 Replies View Related

Ubuntu :: Pen Tablet - Graphical Tablet Is No Longer Recognized

Apr 30, 2011

Upgraded to 11.04 and my graphical tablet is recognized no longer Any idea how can I set it up? Wizardpen is not working, the ppa on my repository says something about "Natty" instead of "Maverick" (As than before)

If I type lsusb on my terminal then this line appears:

Code:

Which is completely false because the Genius MousePen 5x4 Tablet is this one

And I have the Genius Easypen i405, which is this one

View 4 Replies View Related

Hardware :: Get Omnipen OP 906 Pen Tablet (not Tablet Computer) To Work

Apr 22, 2011

I want to get this pen tablet (not tablet computer) to work (for drawing in kolorpaint / krita / gimp etc)

Omnipen OP-906 (ancient mid-90's device). It came with floppy with drivers for Windows 3.11 and old Mac Plugs into ttyS0 (com1. It has "tablet mode" and "mouse mode". It is meant to always start in "tablet mode", but if I give it a small power interruption (take out the AC plug from the wall halfway and quickly plug it back in), it sometimes kicks into "mouse mode". The original driver is supposed to be able to switch the modes

[code]...

View 2 Replies View Related

Programming :: Building And Running New Kernel Modules In An X86 Pc

Sep 26, 2010

I have an x86 pc and installed lucid these are the details of my distribution version:

I am trying to build a kernel module i am getting the following error:

How to build kernel modules

View 3 Replies View Related

OpenSUSE :: Android SDK From Scratch?

Dec 13, 2009

I'm running openSUSE 11.2 KDE 64 bit. I'd like to install everything required for the Android SDK. I don't have any of it installed atm. Can anyone recommend an existing how-to? All I find are Ubuntu-specific tutorials. I'll need to install java, eclipse, and the Android SDK. I have not used/installed any of this before, so I'm looking for a detailed, step-by-step guide for openSUSE 11.2 KDE.

View 6 Replies View Related

Ubuntu Networking :: Can't Access Https Pages - Running Firefox In 10.10

Nov 19, 2010

HTTPS doesn't work. Im running firefox in ubuntu 10.10.

View 1 Replies View Related

Slackware :: Building Packages, Not Running An Alternate Operating System Or A Service Such As Ssh?

Mar 25, 2011

I have been playing with chroot to build packages.I am wondering about the limits or caveats of using chroot to mix operating systems. For example, what should I beware if I use 12.2 and chroot a 13.1 system? Or if I use 13.1 and chroot a 12.2 system? After all, the chroot does inherit some attributes of the parent system.There is the noticeable difference of kernel versions. For that one reason I'm thinking that mixing system versions might be frustrating.

My focus is building packages, not running an alternate operating system or a service such as ssh. I realize that building packages as root in a chroot potentially compromises security but that is not my focus.I am aware that a chroot is not a true virtual system.A virtual machine is an option, but in this thread I'm curious about the limitations of chroot. I find building packages in my virtual machines much slower than actual hardware, even with a dual core. Hence my interest in chroot

View 11 Replies View Related

Ubuntu Security :: Firewall Installed And Running In10.04 - GUI Tools?

Jul 1, 2010

Is there a firewall installed and running in 10.04? If so are there any gui tools for configuring it and where are they? If there is not a firewall, what should I install to get one properly up and running?

View 2 Replies View Related

Ubuntu :: Build Some Form Of PC Capable Of Running Basic Dev Tools / Scm?

Feb 14, 2011

I need a dev setup which is external to the box I work on at home. I.e. I need to build some form of PC capable of running basic dev tools / scm.Given its very basic needs, was thinking of finding a fanless, probably atom based, micro-itx solution. I.e. small, silent, can just sit somewhere all day with a nightly backup to a NAS. (it would be really cool then as well because I can throw it in a bag and take it places when I need to -- its wrong I get excited about that...).Just wandering if anyone has done anything similar?lightly worried about the performanceWas thinking something like the Shuttle XS35GT:but have a gut feeling I could build something better for 2/3's the price.

Friend suggested buying a simple netbook as its probably one of the cheaper ways to getting an atom powered system, and has a screen for setup. ll it needs to run is a web server, SVN/GIT, Trac, maven, hudson and artifactory. I.e. it does not need to be capable of streaming video content etc (i.e. its not a media box) for 1 user at a time. Projects are not going to be the smallest for home projects, but really in the grand scheme of things its going to be small.

View 3 Replies View Related

Networking :: Running Tools After Changing The Internet Service Provider?

Dec 5, 2009

I am facing some problem while running my tools (electronics tools).Actually my company has changed the internet connection (internet provider). Everything is working fine but it changed my IP address (which is ok) but it also changed my HOSTNAME (which is really starnge for me).And the problem with my tools is that with old connection it's working fine but with new connection GUI mode is not working, only batch mode is working.

View 14 Replies View Related

OpenSUSE Install :: Upgrade It To 11.2 64bit Without Starting From Scratch?

May 17, 2010

I have this 11.0 64bit workstation here. It has been running flawlessly for the longest time. It is setup really nicely for this particular job.Anyways, I would to upgrade it to 11.2 64bit without starting from scratch. What would be the best, simplest way to do this?

View 9 Replies View Related

OpenSUSE :: Running A Nvidia Gtx260 And Have Installed Nvidia Drivers For Series 6 And Up?

Jun 9, 2010

opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.

View 9 Replies View Related

General :: Tools To View/edit User Space Memory Of Running Processes?

Nov 2, 2010

Are there any tools to view/edit user space memory of running processes on Linux?

It would be a great learning tool.

View 1 Replies View Related

General :: Checking If Distro Running In Live Mode Using Terminal Based Tools?

May 10, 2011

I searched and found several solution but those are distro specific. I need to find out if distro is running in live mode (from CD, USB) instead it's installed on hdisk. The solution should be independent of distribution.

View 7 Replies View Related

Fedora :: Root Login Works At Shell - Auth Error When Running Admin Tools

Jan 25, 2011

I login as normal user. I can 'su root' fine - password authenticates. However, If I try to run System->Administration->Users/Groups, when it asks for root password, it is rejected. When I run updater, it reports failure to authenticate, but doesn't even ask for root password beforehand. Is there a cached password someplace?

View 7 Replies View Related

OpenSUSE Hardware :: 11.4 64-bit And Wacom Bamboo Tablet?

Apr 9, 2011

as a kind of luxory item I am thinking of adding a bamboo to my PC. Before putting action behind this, I wonder how much of a hazzle this brings about. Has anybody of you experience with 11.4 in this field? If a hazzle: Can anybody be bothered to compile the driver and provide it as a 1-click on the build service - or even in the official repositories? Would there be full functionality actually after all? BTW, I am aware of the wacom SF-site.

View 9 Replies View Related

OpenSUSE Hardware :: Wacom Bamboo Tablet Users On 11.3?

Jul 17, 2010

I decided to write here because I was wondering if there are any Wacom Bamboo (MTE-450) tablet users who experience any resume problems with their tablets on 11.3. I experience this issue on 11.2 - tablet was not working after resume from suspending to RAM - I had to replug it in order to make it work. Now when I upgraded to 11.3, the issue was still there.

Finally, I was able to "workaround" the issue by doing the following (found on some Ubuntu groups):

Code:
echo 'SUSPEND_MODULES="wacom"' | sudo tee /etc/pm/config.d/50wacom

I am wondering if that happens to anyone else and if it still the case for a freshly installed 11.3.

View 1 Replies View Related

OpenSUSE Hardware :: How To Install Trust Tb6300 Drawing Tablet

Apr 16, 2010

OpenSUSE and I recently bought a drawing tablet with pen from Trust (tb6300).

How is this possible to make it work in openSUSE?

View 1 Replies View Related

OpenSUSE Hardware :: Tablet The Mouse Hits The Top Left Corner & 11.3

Aug 31, 2010

In OpenSuSE11.2 I followed this url to got it to work: Genius MousePen 8x6 It worked like a charm. In OpenSuSe 11.3 the Xorg stuff is different. In /etc/X11/xorg.conf.d there is a wizardpen.conf but when I use the tablet the mouse hits the top left corner. Using the settings from the url above doesn't make it work either.

View 4 Replies View Related

OpenSUSE Hardware :: Load The Waltop Tablet Driver Of Kernel 2.6.37?

Mar 15, 2011

the new kernel 2.6.37 of 11.4 finally natively supports Waltop graphics tablets. However, I am not sure how to activate this driver. The tablet uses the usbhid driver on startup which is wrong.

View 3 Replies View Related

Fedora :: Apache Not Parsing Php Pages / Trying To Run Php Script In Browser Its Not Opening Php Pages?

Feb 19, 2010

I have a Cent OS 5.4 32 bit final installed in my dedicated server.

I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.

Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.

Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..

View 2 Replies View Related

General :: Man Pages Not Displayed / Saying Formatting Pages And Then It Is Displaying Blank Page?

Sep 9, 2009

when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.

View 6 Replies View Related

OpenSUSE Hardware :: Installing Intuos2 Tablet And Canon MP620 Printer?

May 7, 2010

Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved