OpenSUSE Hardware :: Switching Bluetooth On / Off With Gnome Applet
Aug 11, 2010
On my ASUS Eee 1000H with openSUSE 11.3 I'd like to be able to switch bluetooth on and off with the gnome bluetooth applet. However, when I run /usr/bin/bluetooth-applet as a normal user, the applet tells me:
Code:
** (bluetooth-applet:8598): WARNING **: Could not open RFKILL control device, please verify your installation
Okay, so it doesn't have write permissions on /dev/rfkill. When (as root) I change the permissions on /dev/rfkill from crw-r--r-- to crw-rw-rw-, the applet works as expected. Until the next reboot, when the permissions for rfkill are reset to crw-r--r--. How to make the permissions stick? Or if there is a better way to allow the applet to enable and disable the bluetooth adapter?
I have a suspicion that this is easily fixed, however a good google (and this forum) hammering having turned up the fix. So I probably have the wrong search criteria, My Gnome Applet for switching CPU Frequency Scaling has 'disappeared' and is not listed in the the Add to Panel.. list of applets.
I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
When my system starts, the bluetooth monolithic applet is alwaysstarted. I'm not using any bluetooth devices, so there's no need to runit but I can't find where to stop it from loading.I ran chkconfig andit's not there.[URL]
I am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
I updated from v11.2. to v11.3.I have 4 workspaces defined. The Gnome panel shows only in the first workspace! When I switch to another one, the panel disappears. As you may imagine, this is rather inconvenient. Once I am in another workspace other than 1, my only option is to reboot since there is no way to navigate anywhere. How do I set up the Gnome panel to show in all workspaces?
Gnome-keyboard-applet takes 16MB or RAM. This is million times the total amount of memory my first computer had. It included the whole operating system and a graphical file manager in 1/1000000th of what gnome-keyboard-applet takes!
nm-applet won't start after system upgrade with gnome 3.0. NetworkManager version is 0.899 in gnome 3 repo, I read somewhere that it should be 0.9xxx for gnome 3.0. Also got this message "The system network services are not compatible with this version." when trying to run network from system settings.
I have a minor problem with my "Update Applet 2.28.0" in Gnome. It occurs when I want to make the applet do one or more suggested update(s). It always asks me for the password of superuser/root: "Authenticate : Authentication is required to update packages. [...]". I think under my installation before (11.1 maybe updated from an older version) I could tell the automatic/semi automatic updater to remember the su password (in YaST or in the authentication dialog?).
In the help manual on my computer (and in the internet) there is the possibility to make the updater remember the password via policy kit: ("Access to all privileged operations is controlled via PolicyKit." See: GNOME Documentation Library : gnome-packagekit Manual : Introduction) I could not find any policy kid or any other possibility to give to the automatic updater (or its user) that privilege permanently (=to remember authorization). I think on a system with more (real) users this could be a real problem (not just an inconvenience).
I want to change Weather Applet preferences which is present in the panel of GNOME /openSUSE.But seems to be locked.Please let me know as to how once can change the default settings.I have already used the weather in the time applet(works well).But i want the weather in a separate applet.
bluetooth-applet is not auto-starting on one of the 2 users of a system. In the user's environment where auto-start does not work it can be started from a shell without any error and bluetooth otherwise works fine. There is an entry in the start up applications preferences for both users. We are running 9.10.
I am trying to connect my cell phone through a Bluetooth dongle in Ubuntu 8.10 but when I try setting up a new device my cell phone is not seen. I tried reading some guides, I installed everything needed but still it doesn't work, some files are even missing (probably because they guides are for older versions of Ubuntu but i can't find a new guide on it) like.
I tried the following commands: jessica@jessica-desktop:~$ sudo hcitool scanScanning ... 00:16:75:15:14:81 Hill Billy jessica@jessica-desktop:~$ sudo hidd --connect 00:16:75:15:14:81 Can't get device information: Success jessica@jessica-desktop:~$
I guess they work but how come my device is still not seen in the Bluetooth applet? How can I send files? Why can't I connect to the computer using my phone? I don't want to depend on windows for this too.
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click. Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
I currently run Linux Mint 9/GNOME on my main desktop but am thinking of switching to KDE. The main reason being that the file managers seem to have more to offer than anything in GNOME and the DE itself just seems to look better.
So the question is, if I switch, what issues am I likely to run into? I would like to continue using as many of the same programs as possible and I know that a lot of them are going to require GNOME dependencies and either might not run or will run slow, but I'm not very Linux savvy and don't know much beyond that.
I would like to still use Compiz, Guayadeque, and a few other programs. If I am going to loose the ability to run a lot of programs I am use to just to get the nicer file browser and DE then it's probably not worth it.
I'm pretty familiar with GNOME now so I'm looking for some advice from KDE users, especially if you started with GNOME.
I am trying to switch desktops managers from GNOME to KDE followed the wiki page but can't seem to get it right as in my /etc/sysconfig folder there is no desktop file to be modified to tell my system to use KDE at startup. download a new F10/KDE live cd today and try the install that way if I get the chance to do that. But if I can't...
I found a link that shows how to switch 11.04 to Gnome [URL]. However, the same trick is not apparently available for going back to Unity. What would be the step(s) to revert back to Unity?
How do I switch from Unity to Gnome ? I have downloaded Gnome but cannot figure out how to make the switch. Unity is terrible and if I cannot switch back to Gnome I will have to switch Distros.
I have a question about switching between desktop environments like kde and gnome. I'm using ubuntu 10.04 with gnome 2.x and with a really cool theme I found and mixed. I would like to check kde desktop because I kinda like the appearance of it. I have also cairo dock and compiz configured for my needs. my question is whether I can switch to kde desktop without losing my customized gnome environment if I decide to switch back to gnome? (I know that to switch session you need to log out but that's not the point) the next question is how can I install kde without losing the customized gnome theme I have ?( if the answer for the first question is negative)
the final question is whether I lose data when I switch desktop and if do than what specifically.
I typically have pidgin and amsn, as well as firefox and thunderbird running.Once in a while, the left mouse button ceases to function as the left button, and the right button becomes the left button, or almost.. I wonder if this is a bug, or am I hitting the left-handed-mouse function while typing accidentally??
I recently switched my desktop environment from KDE-4.3.4 to GNOME-2.28-2 and I did that by installing most of the gnome-packages and uninstalling pretty much all of the kde-ones. After reboot everything worked fine except the file browser that doesn't seem to care about my feelings. It launches and when I try to kill the process the status changes from sleeping to uninterruptible and then back to sleeping. The only way is to reboot but that isn't a solution.Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
When I switch viewports in 11.04, the gnome panels, desktop and stickied windows slide when they would stay put in 10.10. How do I change back to the previous behaviour? I'm using Ubuntu Classic (Gnome 2) and love that Compiz didn't carry over my settings during the upgrade.
Just updated my system to 11.04 and was not a fan of Unity. So I decided to switch to gnome 3. I downloaded all the packages and made the switch, only to realize I had made a HUGE mistake. While gnome 3 looks beautiful, it doesn't work at all for me. I have no internet (wired or wireless) now, and a host of other complaints.But when I try to restart Unity, the system fails. I also cannot start up Ubuntu in normal or Classic modes anymore.
I wanted to get a taste of the difference between Gnome and KDE Ubuntu so I downloaded and installed KDE. During the installation I got a pop up box telling me that KDE has determined I had some sound drivers that were not necessary and should I let the program uninstall these files. Like a total jacka$$ I said yes. After the installation was complete I had no sound. I switched back to Gnome, uninstalled KDE, and haven't had sound since. Sound is fine in my Windows 7 dual boot. I ran some commands in the terminal and found that the system isn't recognizing any soundcard.
I often need to login into various accounts. In Debian 7 I always was able to copy and paste passwords from text files if I was asked for an input, but now the textfield for password input locks the whole system and I can't do anything else before I have supplied the password. Is there any way of restoring the old behaviour to make password input forms (like the request for GPG key passwords in Evolution) just being an addintional app-window instead of an input request, that locks everything else? I want to be able to open the proper file with the login data when prompted for it.
I know I could theoretically solve this issue by using a general system wide main key which would supply all individual login data, but I want to memorize some often needed phrases by actually typing them when I need them. I just want the possibility to open text files for copy and paste when I'm prompted for a password if this is something I don't even want to remember.
Using Windows 7's superbar, I can select/launch the 2nd application group by <Win>+<2>. We have DockbarX in GNOME, which is nice (grouping the windows like Windows 7), but it doesn't enable the <Win>+<2> style keybaord shortcuts.This is not restricted to making Linux like Windows. But I just find the <Win>+<2> style shortcut very useful. Are there similar ways in Linux to quickly switch between specific apps without pressing <Alt>+<Tab> many many times?
If I am logged out of GNOME and switch to tty1 and back, I get a stream of errors (which I can't copy...) on a black console. If I am logged in I am fine. This is very annoying because I would like to be able to log out of GNOME while I am running particularly memory-intensive scripts (they approach the limit of my 3.8 GBs of RAM).
