I installed openSuse 11.4 on my netbook, an Asus T101MT touchscreen and i'm very happy to see than all the hardware run perfect.
I have only a problem with the webcam:
Code:
Bus 001 Device 003: ID 13d3:5111 IMC Networks Integrated Webcam
The video of this webcam is reversed vertically. I tryed with Kopete and with Skype but the problem remain.
I've been trying to figure out how to set up my Apache 2 running on Ubuntu 9.10 to provide a reverse proxy so I can see my wifi network camera monitoring my dogs and still have access to my family website. First, I followed the suggestions from this thread on Ubuntu forums: [URL]. I set up a similar rule set at the end of my /etc/apache2/sites-available/default, restarted apache -- from which I got a response saying that Apache2 could not determine the server name -- and then tried logging into my server through its ip address. When I tried http://192.168.2.80/dogCam, I just got a 404 error. Here's what I added: (I also tried my domain name, but it also didn't work.)
Code:
<VirtualHost 192.168.2.80:80>
ProxyPass /dogCam/ http://192.168.2.160/
ProxyPassReverse /dogCam/ http://192.168.2.160/
</VirtualHost>
When I looked at many other threads, I get recommendations to have my setup in httpd.conf. But, in both this server and a freshly installed Ubuntu laptop, my httpd.conf file is empty! I tried copying and pasting the recommended contents of the following thread, with the example proxy paths replaced with the ones I needed: [URL]. Straight-forward tutorials don't seem to apply, as Ubuntu has a blank httpd.conf file. I figured out that Ubuntu seems to load its modules by simply adding soft-links to the modules of interest from modules-enabled to modules-available. But, after a full day of trying to figure out what looks to be fairly simple and well-documented, I am at a loss for setting up this reverse proxy or even figuring out where to set ServerName to define my domain name to Apache2 in Ubuntu.
I also posted this as a question in launchpad, but wasn't sure if this might be a better place. Pretty new to Ubuntu, if you couldn't tell.I just upgraded from 9.04 to 9.10 and cheese/skype don't see the webcam built into my machine. It worked with Windows 7 that came with the computer, and in 9.04. I'm using a Asus 1005PE.
result from lsusb:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I'm having trouble with the webcam on my laptop. This is a full-sized laptop, not one of the Eee models.I'm not entirely sure what the model or chipset of the webcam is, as there doesn't seem to be much documentation available (as far as I know, this is Asus' first foray into the laptop market in the US).
I previously had the camera working just fine in Windows Vista, so I know the hardware is just fine. I have tried several programs to get the device working, and some (Cheese, for example) are able to get the green light next to the camera to turn on. I've tried running a number of programs as both the normal user and as root, but I don't seem to be able to get the camera to output video. I didn't see any drivers on the Asus site. Is anyone able to lend a hand with this? I'm moving out of the country in a month, and would really love to be able to keep in touch with my family and friends over skype or something similar.
EDIT: In programs like Cheese, the webcam seems to be detected as "USB2.0 UVC PC Camera (/dev/video0)". I imagine it's a good sign that video0 is available.
I have a asus g50v laptop with a built in webcam and microphone running ubuntu 10.04 32 bit and its not detecting the webcam / microphone
View 12 Replies View RelatedI am using RHEL5. These are my config files:
Code:
options {
listen-on port 53 { 127.0.0.1; 192.168.14.54; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
[code]....
I'm curious as to whether anyone else has experienced this, and has an explanation. I'm running Kile 2.0.85 under openSUSE 11.3 32-bit on a Lenovo X61. Twice in the past couple of days I've had the bizarre experience that, upon a sudden burst of typing my text has appeared in Kile in reverse order.
no ngis fo ecnacifingis eht fo redaer eht dnimer esaelp ,dniw cihportsoeG a htiw snoitalumis eht gnicudortni erehw ,Note the perfect reversal (I rarely type that accurately in forward mode). A day later it happened again: )1.3.5( noitceS fo hpargarap dnoces eht ni ,niaga ecnO.I've been using Kile for almost a year now, on two different machines and under several versions of openSUSE. Nothing remotely like this has happened before. I don't think I have a virus. I can't think of any event that may have heralded this mystical behaviour. Cheers, jdw
i have sony viao vgn-fz11 Can someone please help ,im new user to ubuntu been trying to get webcam working properly at the moment its upside down and does not work in skype at all just get black screen does this look correct? do i have the right driver?i will try and give as much information as i can.
View 1 Replies View RelatedI have a problem making work a webcam. At the begining, after the instalation of 10.04 in a new laptop, the webcam did not work but with a lsusb I see that the webcam was Webcam 5986:0241 acer. I was not able to config neither use the webcam with any application. After lots of test and forums reading I could not do my webcam to work, and now when I do a lsusb my webcam does not appear.
View 1 Replies View Relatedi have new computer with an asus P7P55D Pro board.
My fan sensors does not work with this board. And i found that there are bugs in the asus_atk0110.c file. I found also a thread about this topic under
asus_atk0110 not working on Asus P7P55D PRO - linux.kernel
This is a kernel source. I don't know, if this patch can be used for my current kernel:
Linux linux-je9t 2.6.31.8-0.1-desktop #1 SMP PREEMPT 2009-12-15 23:55:40 +0100 x86_64 x86_64 x86_64 GNU/Linux
Does anyone know, where i can found this patched file for my kernel or when this bug will be fixed?
I recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.
Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.
[Code]...
The sound card is cm-6501 incorporated on a asus m2n-e sli mainboard
/usr/sbin/alsa-info.sh = http://www.alsa-project.org/db/?f=be...855e343bb23463
rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-tools-gui-1.0.21-2.5.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-tools-1.0.21-2.5.x86_64
[Code]....
And if it is not challenging for you, in yast-hardware I have no sound/audio shortcut
uccessfully installing 11.3 M4 through GM on a test disk on my main machine, I upgraded the main disk on that machine with zypper dup from 11.2 to 11.3.As that went well, I decided to upgrade my netbook Asus EEE PC 901 from 11.1 tot 11.3 through zypper dup. While installation gave no errors, the system won't boot anymore, that is, grub loads and presents the boot menu, but doesn't find the kernel:
Code:
kernel (hd0,0)/boot/vmlinuz-2.6.34-12-pae root=/dev/diskby-id/ata-ASUS-PHISON_SSD_SOQ2780080-part1 spash=silent vga=315
[code].....
I'm trying to make the microphone work on an Asus G1S. Neither the internal analog microphone nor the external one is recognized. 50-sound.conf in Modprobe.d has :
options snd slots=snd-hda-intel
# u1Nb.ULiNFUWt9WF:Asus M51S series
alias snd-card-0 snd-hda-intel
[code]....
Under OpenSuse 11.2 i cannot connect to my wireless network. Sometimes computer doesn't see network, sometimes computer cannot connect to it. Encryption: WPA & WPA2 Personal Kernel driver: ath5k Also I am embarrassed that in lspci and yast written various models of my wifi adapter.
Code:
linux-ra0h:/home/miksayer # lspci | grep "Wireless" 01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
I have a Hp 2-megapixel webcam and wanted to use on opensuse 11.1 I look around and search for threads in this forum for webcam issues but can't find an exact solution. Tried to detect the webcam with lsusb and the result is:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
I posted hoping someone out there successfully made this beast work. If anyone have an idea or link to a workaround,
I've just bought an Asus U31f and installed openSUSE 11.4 64bit on it.
There are no problems with the mouse and mousepad at first when I boot up, but after a while it starts to skip and jump around, and will hardly move vertical at all (allthough it is very eager to move sideways).
The touchpad also becomes overly sensitiv, as I can move the arrow from side to side while holding my finger 0,5 cm above the touchpad, as seen here: [URL]
The weird things is that it can work fine for several hours, and the suddenly turn evil.
Within a dual boot option two os are now available on the asus eeepc 1005ha,
(1) the windows xp system and in addition (2) the linux 11.1 version of opensuse.
After and also during the installation process of the linux 11.1 os, an error message had occured:
No network found!
I tried to fix it by changing some settings (network manager on/off), but no
improvement could be achieved. Some people argue to wait for a kernel
update higher than *.27.*
Somebody knows something how to fix the network (eth0) internet connection?
just installed opensuse 11.3 on my asus eee pc 1018p and have severe problems to make the wireless network card work. tried to install the driver with ndiswrapper and b43-cutter, but without any success. ifconfig does not show any wlan0 device. below find output of
lspci -v
dmesg
ifconfig
installed opensuse on several notebooks/netbooks before but never ran into serious trouble.
[code]...
how to find out what driver my webcam is using and where its located the webcam it self works but goes from normal to dark after a minute of use and would like to fix it
View 2 Replies View RelatedI want to use my laptop's built in webcam as remote webcam and I don't want to use FTP and post images to a www and use php script or sth, I want to make it accessed remotely as a fast stream and if there is a way I would like to use it with Windows XP - Microsfot Windows Messenger.
View 8 Replies View RelatedI have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
I'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:
on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0
being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).
Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?
P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?
I tried to install the easy way, the catalist driver. I used this page: SDB:ATI drivers - openSUSE When I clicked the link, yast asked for the root password. After ar reboot, no more desktop. Then I did init 3 adn startx ( it seems although I have no desktop, I am in runlevel 5)
xorg xserver 1.8.0
using config file: /etc/X11/xorg.conf
using config derectory: /etc/X11/xorg.conf.d
15 lines who only a slightly differ at the end.
[Code]...
This is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedNew eeePC 1015PEM netbook, 2GB RAM, 250GB HDD. Came with Win 7 Starter; I retained this and installed openSUSE 11.3 alongside. Everything works well in Win 7 Most things also work well in oS 11.3, but there is a knotty problem with audio from the built-in speakers. Headphones are OK, but the speakers don't work reliably. Others have reported this on similar machines, and a number of "fixes" have been proposed in a wide range of forums, but so far I haven't found any that work.
I've actually installed oS 11.3 twice. After the first install I had no speaker sound at all, but after a day or two fiddling around it started to work of its own accord for no reason I could point to. For unrelated reasons (a silly mistake by me in Win 7) I then had to re-install oS 11.3 from scratch. This time the speaker sound worked after install, but then it dropped out again a couple of days later. Headphone audio has remained OK throughout.
I'm aware of and have applied the acpi_osi=Linux kernel parameter to enable the Fn keys on the machine (including sound volume and mute/unmute), so it's not that. I've combed the forums and Google extensively for other suggestions, and have tried them - including installing alsamixergui. I've also installed a properly matched ALSA KMP which changed some of the alsamixer controls but didn't cure the problem. Since it all works very well in Win7 and works sometimes in oS 11.3, I conclude that the problem is not with hardware but is something in software.
Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
Skype does not detect my webcam, despite other programs such as aMSN and Kopete being able to detect my webcam.The 'lsusb' command says the following regarding my webcam.Bus 002 Device 002: ID 046d:08ac Logitech, Inc. QuickCam CoolI'm using Skype version 2.1.0.81 beta which is the latest version.I'm running Opensuse version 11.3 the 64 bit version
View 9 Replies View RelatedI just got a Logitech c210 webcam, as from what I gathered this UVC cam/microphone device works with Linux ...However ... skype 2.1.0.47 can't seem to see my webcam when it's connected, even though it appears to be configured when plugged in, as the following output from dmesg shows:
Code:
[20227.480098] usb 2-1: new high speed USB device using ehci_hcd and address 6
[20227.741045] usb 2-1: New USB device found, idVendor=046d, idProduct=0819
[code]...
I am on a fresh install of 11.3 on KDE. I followed the HCL:Web_cameras guide to setup my cam and it still doesn't work after testing with aMSN and Kopete.I can see the device when I run lsusb:Bus 003 Device 003: ID 041e:4034 Creative Technology, Ltd Webcam Instant.However, the 11.3 drivers link was not added on the guide so I managed to find this link but I get "The following packages could not be installed webcam-gspca2" in Yast when I try to install it (without any more details).
View 9 Replies View Related