I have a Jetway "NVIDIA MCP7A-ION mini-itx for ATOM processor" board (whatever that may mean :-) -LF.pdf with HDMI but no SPDIF.How should I be able to produce some sound over HDMI?Here are my findings so far:
Code:
>aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies View RelatedI'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
Configure HDMI Sound on Acer N282.
No sound HDMI.
ALSA information is located at [url]
Although there is sound via hdmi (music, video, kde), there is no sound in firefox via hdmi. But what's more there is sound in headphones and analog output but I just can't make my sony tv to grab sound from analog output. So I want to ask you if you know how to make firefox to play sound through hdmi?
View 8 Replies View RelatedI have recently added a Zotac Zone 240 (Nvidia) card in my system replacing a Nvidia 7600 card. What I have noticed is that I cannot play audio over HDMI. The Zotac audio hardware is detected by openSuse 11.2 but the KDE Sound does not show this Nvidia/HDMI sound as a possible audio device. How to add it as the normal add and look for device option does not have this specific Nvidia audio device as an option to add.
View 4 Replies View RelatedHaving some problems with HDMI-Audio on my HTPC: I don't get sound out of HDMI port! For system info look there: Sysprofile
OS is Suse11.3 64Bit with KDE now!
At "System-Settings/Multimedia/Audio Output" there are the following devices in the given order:
HDA NVidia (ALC662 rev1 Analog)
HDA NVidia (ALC662 rev2 Digital)
HDA NVidia, NVIDIA HDMI (HDMI Audio)
That's consistent with the connector layout of the mainboard. Playing "Test sound" while marked the HDMI Audio is not causing any output with HDMI, while analog works just fine!
I also installed the nVidia prop drivers with the packet manager.
In YAST there is one card found in the sound section::
Idex=0 and Card Model=MCP79 High Definition Audio
OS Information
OS: Linux 2.6.34-12-desktop i686
Current user: vastolorde@linux-9eds.site
[code]...
I have HDMI sound enabled by default in System Configuration (Music, Movies and System Sounds), but the only multimedia application that uses it is DragonPlayer. (System Sounds work fine also)Kaffeine still wants to use my INTEL card as does Amarok; VLC Player just complains that my AlsaLib file isn't up to date.I am running opensuse 11.3, KDE 4.5.90 (4.6 RC1) Kernel 2.6.34-7-0.5-desktop sound is outputting to a Samsung 42" 1080p TV.
Sound/Video card is an ATI RV710 (Radeon HD 4350). What does DragonPlayer do that the other three applications do not?How can I configure Kaffeine and VLC to output via the HDMIAlso since doing a system update to KDE 4.5.90 my screen blanks every ten minutes, I have tried to disable screen saver and screen power save in power management, however still i can't stop the system blanking every 10 minutes any clues?Finally DragonPlayer is now crashing after every video has finished playing before i can start the next
I am attempting to set up a machine to use as a movie/video viewer. When I connect this machine using an HDMI cable to an HDMI TV, I get video, but no audio. No beeps, no system sounds, no noise of any kind.
I've run the following mixers and set all volume controls to maximum:Gmixer, Kmix, AlsaMixer and pavucontrol.
When playing a video, pavucontrol meter shows signal from the application and shows output signal to the HDMI device, but where that output is going to is beyond me.
Using the Sound setup of Yast, I attempt to play a test sound on the HDMI, nothing.
Built in Audio adapter works fine. I have disabled it in pavucontrol in attempts to get the sound directed to the HDMI output, but, silence is all I get. I've also tried enabling and disabling simultaneous output with no difference in results.
I've tried a few suggestions from other posts with the same issue (creating /etc/asoundrc.conf, modifying /etc/pulse/default.pa), but no joy.
If I boot up that other operating system (starts with a W), all sounds (system & video) show up on the HDMI input with no adjustments needed.
Why must this be so difficult?
The technical details:
Suse 11.4
EVGA GeForce 8400GS Video card (HDMI)
All commands below were issued while HDMI cable connected, and video playing (using VLC).
Output of alsa-info.sh: [url]
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
recently installed an NVidia GeForce 240 in my HTPC, and finally got it working correctly (as an HDMI-out display) n Lucid Lynx 64-bit.My problem now is that there is no sound, even though sound should be passing through, and I don't know where to begin to fix the issue.
View 4 Replies View RelatedWell almost no sound. The only way to get sound out is if i use the following command
speaker-test -D plughw:0,7 -c 2 /dev/urandom
I have the following line in /etc/pulse/default.pa
load-module module-alsa-sink device=plughw:0,7
But when i play any applications i hear no sound. For example "mplayer zion.mp3" results in silence.
When using pavucontrol, i see the sound bar moving for the hdmi hardware device. But i still hear nothing.
Does anyone know what could be wrong?
Can someone provide me with the exact instructions I need to backtrace pulseaudio? I have a bug that a developer is asking me to do a backtrace and the instructions on the ubuntu site aren't very good. I tried exactly what it said and my problem is that it says to "run the program under gdb by doing
gdb pulseaudio 2>&1 | tee ~/gdb-pulseaudio.txt
unfortunately pulseaudio isn't actually starting when I do this (I kill the program before I do this command, I also add the appropriate text file so pulse doesn't auto restart). Not sure what's going on but I'd appreciate any help as I can't get sound out of HDMI (I get it but it dies out fast).
For my mythtv/router box I'm trying to get the sound working trough hdmi as well as over the analog out. Because the HDMI is located on the mainboard and has something to do with the video driver I downloaded and installed the following:
ATI Catalyst™ 10.3 Proprietary Linux x86 Display Driver94.2 MB10.44/28/2010
However the output aplay -l is showing me(I got hdmi sound working on my laptop) isn't the same as on my laptop, it does not show the hdmi "sound card"
here is the output:
Code:
~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
[code].....
I prefer sound trough hdmi but for the HDMI to work I previously needed to be able to see the HDMI device listed by aplay -l
HDMI outputs video but not sound from my Acer Aspire 5738 laptop.I have tried both SMPlayer and VLC setting both audio outputs to HDMI.Those media players have always worked for me using other Linux distros.Is there another media player that I should be using?If it's important;lspci lists;Audio as ATI and Video as ATI Mobility Radeon HD 4500
View 2 Replies View RelatedI can not get any sound through my HDMI cable. Sound through my headphones works fine. But when I want sound to go through the HDMI and play on the monitor, there is no sound.
The HDMI cable is connected to my Radeon R9 270X graphics card.
My OS version is 8.1.
It works on Windows 8.1, so it is definitely an operating system problem.
I'm on Jessie, and use KDE.
Sound keeps coming from laptop's speakers, even when HDMI is connected to an external TV.
I've tried to fix this issue using both Pulse Audio Volume Control and KDE's System Settings -> Multimedia -> Audio and Video Settings. No luck. I've read several topics around, but there are plenty of variables to consider.
Trying to put up my HTPC with Ubuntu 9.10 but I cant get any sound to work. Im using a HDMI cable between the pc and TV. Computer is an Asrock ION HT/BD 330. Also running a 64 bit version of Ubuntu. I have upgraded all I know or think I know what to do but still with no luck. To start of heres my multimedia.
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:fae78000-fae7bfff
my cat /proc/asound/version is as follow
Advanced Linux Sound Architecture Driver Version 1.0.22.
Compiled on Dec 17 2009 for kernel 2.6.31-16-generic (SMP).
My lsmod is as follow:
Module Size Used by
vfat 13184 0
fat 59832 1 vfat
binfmt_misc 10220 1
ppdev 8232 0
snd_hda_codec_nvhdmi 6304 1
snd_hda_codec_realtek 288292 1
snd_hda_intel 30208 0
snd_hda_codec 96384
My modinfo soundcore is as follow
filename: /lib/modules/2.6.31-16-generic/kernel/sound/soundcore.ko
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 3A50BBE947364A4D9DB6A97
depends:
vermagic: 2.6.31-16-generic SMP mod_unload modversions
I have an HP 8510w laptop and I run ubuntu 10.04 out of an external harddrive.
I have no problem getting video over hdmi using the latest proprietary nvidia drivers however I cannot get sound through the HDMI cable.
I have read around without being able to find a solution.
Running "aplay -l" shows only my intel sound card and also there is no hdmi sound interface in the sound preferences (Only the normal output interface).
I am using the latest proprietary nvidia drivers (Believe it to be 1.95) and the graphics card is a Quadro FX 570.
how I can get sound out to work via the hdmi cable?
I put a hdmi cable on my note, I turned on the TV and ran to is a beauty but when I turned on the video ... the sound did not come. I went to System -> Preferences -> Sound and changed the output to "Digital Stereo (HDMI) output. And no sound came out. The boxes of note works perfectly.
Here follows some details of the hardware:
Code:
aplay -l
Lista de Dispositivos PLAYBACK Hardware ****
placa 0: Intel [HDA Intel], dispositivo 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Dispositivo secund�rio: 1/1
Dispositivo secund�rio #0: subdevice #0
placa 0: Intel [HDA Intel], dispositivo 3: INTEL HDMI [INTEL HDMI]
[Code]...
I have recently installed Ubuntu 10.10. Everything is working fine except I have no sound. When I use the command 'aplay -D hw:0,0 somefile.wav', I can get sound through headphones attached to the headphone jack. But I can't get any sound through the speakers. This is a dual boot desktop and the sound works fine under Windows, so no problems with hardware. The PC monitor is connected through a hdmi cable and I would need sound through the speakers. The output of alsa-info.sh is at
HTML Code:
<a href="http://www.alsa-project.org/db/?f=cb172534097c313b25836f77f2a40fef857102ba">alsa-info.sh output file.</a>
I'm using an HDMI connection, and the sound connection is unreliable at best. When it works, it is working fine, then all of a sudden (maybe because it isn't being actively used for an extended period of time)the sound connection vanishes. When at System --> Preferences --> Sound --> Output I'm not seeing any option for the HDMI connection currently and the sound is not working. All the volumes are unmuted and I cannot use a softphone nor .....,nor do videos that I have watched in the past with sound have any.
Last night when this happened, I rebooted and the sound was working just fine then. In the past, I was able to get the computer to recognize the HDMI connection has sound by momentarily unplugging it, then plugging it back in. Though both last night and today that hasn't worked.When I bought my computer, I had Windows 7 installed on it. The same thing was happening then, though it was always fixed via disconnecting the HDMI connection briefly, so there is the possibility of it being a hard ware issue.
I've also tried turning off the device (a HDTV in this case) and turning it back on, but that only solved it once or twice, and neither last night nor today.This is also a 64 bit computer, should that be relevant. Using Ubuntu 10.10, and the only available update to my system at the moment is Google Chrome, which I will be updating after this post.I will be restarting my computer after that update and posting back here if the sound is working, especially with note of whats listed at the System --> Preferences --> Sound --> Output if there are any additional options (from memory, there was an HDMI choice there).
Im trying to get the sound working via HDMII have a HDMI cable connecting my nvidia video card to the monitor... even i say the apps to output the sound through the device 1,3 , i dont get any sound..
View 2 Replies View RelatedI recently purchased a new video card a GeForce 550 Ti, but I haven't been able to get sound working over HDMI.
I'm running the latest version of Ubuntu (11.04) and have installed the proprietary drivers through Additional Drivers.
Code:
The card is being picked up by alsa and I've configured Ubuntu to use HDMI in sound preferences:
aplay -l:
Code:
When I check alsamixer this is what I see:
ALSA reports that version 1.0.23 is installed, although I thought 11.04 came with version 1.0.24?
cat /proc/asound/version:
Code:
I've tried purging ALSA and reinstalling it but it didn't help. Is there anything I can do? Does anyone know if this card is supported by ALSA properly yet? I hate the thought of having to go to Windows to get this working
I have an HTPC running Ubuntu 11.04 and Boxee. Main sound is through HDMI (nVidia MCP73). I would also like to use the headphone jack on the computer from time to time (kids sleeping, etc). Is this possible? I've browsed around here but haven't found anything definitive. I've monkeyed around with the settings in alsamixer quite a bit and haven't found anything promising.
View 3 Replies View Relatedi have just recently switched back to Ubuntu and im trying to run my sound through my tv which is connected through my computer using a hdmi cable thats plugged into my EVGA Nvidia GeForce 210 video card ... i have my computer monitor set up as my main screen but i have my tv set up as separate X screen so i can drag over a movie and watch it on the big tv screen and still do things on my monitor ... when i was running windows i was able to get the sound to play through my tv just as i am tryin to do now... does anyone know how i can do this on Ubuntu 10.04
View 9 Replies View RelatedI've bought a laptop HP Pavillion DV6 2026es.'m trying to connect it to the TV with HDMI, but the sound is not transmitted.This is what I have:
root@ubuntu:~# cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xf2400000 irq 16
[code]...
I am currently using an Nvidia GTX 460 gpu, but I just cant get the sound to output to my monitor through the hdmi. I can see that there is sound coming out when running pavucontrol. And I've looked at other guides and no luck. Here is the link to all of my alsa info If you need any more info just let me know,
View 14 Replies View RelatedI do realize, that there are a lot of other threads regarding this problem. I've spent almost the whole day today reading and trying them out, and at the end, I figured out, that none of them worked for me.
So, I'll provide as much info as possible... code...
Unfortunately, none of this worked, and even after the first 2 methods I didn't have ANY sound at all!
Please help me, I need this in order to have my speakers plugged into the monitor, so I can control the volume via the remote control.
In order to dissolve any suspections to a defect hardware, I'd like to add, that this is perfectly working under Windows 7, 64-bit edition.