Although there is sound via hdmi (music, video, kde), there is no sound in firefox via hdmi. But what's more there is sound in headphones and analog output but I just can't make my sony tv to grab sound from analog output. So I want to ask you if you know how to make firefox to play sound through hdmi?
View 8 RepliesI have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies View RelatedI'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
I have a Jetway "NVIDIA MCP7A-ION mini-itx for ATOM processor" board (whatever that may mean :-) -LF.pdf with HDMI but no SPDIF.How should I be able to produce some sound over HDMI?Here are my findings so far:
Code:
>aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
Configure HDMI Sound on Acer N282.
No sound HDMI.
ALSA information is located at [url]
I have recently added a Zotac Zone 240 (Nvidia) card in my system replacing a Nvidia 7600 card. What I have noticed is that I cannot play audio over HDMI. The Zotac audio hardware is detected by openSuse 11.2 but the KDE Sound does not show this Nvidia/HDMI sound as a possible audio device. How to add it as the normal add and look for device option does not have this specific Nvidia audio device as an option to add.
View 4 Replies View RelatedHaving some problems with HDMI-Audio on my HTPC: I don't get sound out of HDMI port! For system info look there: Sysprofile
OS is Suse11.3 64Bit with KDE now!
At "System-Settings/Multimedia/Audio Output" there are the following devices in the given order:
HDA NVidia (ALC662 rev1 Analog)
HDA NVidia (ALC662 rev2 Digital)
HDA NVidia, NVIDIA HDMI (HDMI Audio)
That's consistent with the connector layout of the mainboard. Playing "Test sound" while marked the HDMI Audio is not causing any output with HDMI, while analog works just fine!
I also installed the nVidia prop drivers with the packet manager.
In YAST there is one card found in the sound section::
Idex=0 and Card Model=MCP79 High Definition Audio
OS Information
OS: Linux 2.6.34-12-desktop i686
Current user: vastolorde@linux-9eds.site
[code]...
I have HDMI sound enabled by default in System Configuration (Music, Movies and System Sounds), but the only multimedia application that uses it is DragonPlayer. (System Sounds work fine also)Kaffeine still wants to use my INTEL card as does Amarok; VLC Player just complains that my AlsaLib file isn't up to date.I am running opensuse 11.3, KDE 4.5.90 (4.6 RC1) Kernel 2.6.34-7-0.5-desktop sound is outputting to a Samsung 42" 1080p TV.
Sound/Video card is an ATI RV710 (Radeon HD 4350). What does DragonPlayer do that the other three applications do not?How can I configure Kaffeine and VLC to output via the HDMIAlso since doing a system update to KDE 4.5.90 my screen blanks every ten minutes, I have tried to disable screen saver and screen power save in power management, however still i can't stop the system blanking every 10 minutes any clues?Finally DragonPlayer is now crashing after every video has finished playing before i can start the next
I am attempting to set up a machine to use as a movie/video viewer. When I connect this machine using an HDMI cable to an HDMI TV, I get video, but no audio. No beeps, no system sounds, no noise of any kind.
I've run the following mixers and set all volume controls to maximum:Gmixer, Kmix, AlsaMixer and pavucontrol.
When playing a video, pavucontrol meter shows signal from the application and shows output signal to the HDMI device, but where that output is going to is beyond me.
Using the Sound setup of Yast, I attempt to play a test sound on the HDMI, nothing.
Built in Audio adapter works fine. I have disabled it in pavucontrol in attempts to get the sound directed to the HDMI output, but, silence is all I get. I've also tried enabling and disabling simultaneous output with no difference in results.
I've tried a few suggestions from other posts with the same issue (creating /etc/asoundrc.conf, modifying /etc/pulse/default.pa), but no joy.
If I boot up that other operating system (starts with a W), all sounds (system & video) show up on the HDMI input with no adjustments needed.
Why must this be so difficult?
The technical details:
Suse 11.4
EVGA GeForce 8400GS Video card (HDMI)
All commands below were issued while HDMI cable connected, and video playing (using VLC).
Output of alsa-info.sh: [url]
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
recently installed an NVidia GeForce 240 in my HTPC, and finally got it working correctly (as an HDMI-out display) n Lucid Lynx 64-bit.My problem now is that there is no sound, even though sound should be passing through, and I don't know where to begin to fix the issue.
View 4 Replies View Relatedafter a update killed my OpenSuse!! I had to completely reinstall. Now I've no more sound in Firefox etc. Only some kde sounds. What excatly should I change where?
View 9 Replies View RelatedI am not really sure where i should put this, in apps or in multimedia so i just threw it in here. I am running openSUSE 11.2 i568 with Firefox 3.6.10 and I cant get sound to work with flash videos such as videos on ..... and songs like on myspace.
View 2 Replies View Relatedonly kde sound but not in firefox etc. What shall i do?pulseaudio seems disabledworked before an update that killed my last installation ( gstreamer? )but there i did some changes which i dont remember anymore.anyway im on a fresh system without xfze and gnome as previously. altough i installed nautilus etc.
View 2 Replies View RelatedI am using openSUSE 11.2 64-bit with Firefox 3.5.8 and Shockwave Flash plugin 10.0 r45. I am getting only video but no sound in Flash videos. Exactly how do I fix this?
View 3 Replies View RelatedI have opensuse 11.2 and I have no sound from opera or firefox. I have checked Yast and it looks like all of the default sound apps are loaded. I have a newer PC with soundcard on the mobo. I also have XP on this machine and the sound works.
View 5 Replies View RelatedI´ve got the problem that i get no sound with adobe Flash 10.0.32.18 in Firefox 3.5.4 on my Suse 11.2 What i´ve done: After Suse 11.2 installation i installed Audiocodecs by using 1 click installation from:
Restricted Formats/11.2 - openSUSE-Community
Switched default Sound to USB Device in Sound Options in Task bar. After this i uninstalled the Adobe Flash plugin and reinstalled the Flash Plugin (after uninstall of Plugin, it still appears in Firefox as "10.0r32") by using the install Option direct from the adobe homepage as Yast Installation.I get sound with Koffein, can play mp3, everything fine, but Flash Clips are without sound. For sound i use usb speakers plugged in direct to the USB port of my Asrock motherboard. Suse also find the on board Nvidia Soundchip, but i only use the usb speakers. For further test i installed VLC Player. Here i also got no Sound, but Video is still playing.
I am unable to get audio from flash videos on sites like ...... When I run firefox from the command line I get the following output.
> firefox
*** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM default
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM plughw:0,0
I have tried reinstall of alsa, libasound. I was having 32-bit flash player; but there was no sound. Now I am using 64-bit flash player from adobe website, yet no sound still. I do not have pulseaudio. The file alsa-pulse.conf does not exist. Somehow, my system thinks there is pulse while I have it uninstalled.
some of my apps will give sounds but not all. when viewing videos on videos, i can get video but no sound. the same is for the vlc player. my particulars are:
new dell computer. dual boot with windows 7 and the sound there is ok.
cpu is intel c7 with 8 g-byte of ram.
os is open suse version 11.2 - 64 bit
desktop is kde
sound is 5 series/3400 seriies chippset high def audio
i just recently installed open suse so no new software other than what was there on install is added. by the way, i get the kde sounds and can play audio cd's so the sound is working partially. just not for these apps. i have adobe flash installed. i'm new to kde. i have previously used gnome on other computers.
Somewhere along the line, sound disappeared from my browser. It was working. I have been following this thread and it has not yielded a positive result. I also installed mmcheck from red dwarf and it worked fine. The only exception was that phonon-vlc and libx264-104 from videolan are installed.
I also found in the firefox about:config with filter to flash:
plugin.disable_full_page_plugin_for_types; application/x-shockwave-flash
Intermittently after using Firefox for watching You Tube etc, you find that there is no sound from Amarok and probably all other sound applications. Sometimes while using Firefox for multimedia playback ie You Tube the sound gets stuck ie (repeats the same few millseconds of sound ad infinitem) like a stuck record (for those that remember them). One solution is to reboot the system, however a quicker method is to stop & restart the alsa sound system.
> su
> [Enter root password]
# /etc/init.d/alsasound stop
# /etc/init.d/alsasound start
# exit
> kmix
[Code]...
I cannot hear anything from flash player or firefox
ANT1 WEB TV /
no sound
Definition of pending adjective from Cambridge Dictionary Online: Free English Dictionary and Thesaurus I cannot hear the pronunciation of the world. Τhe sound chip (Realtek ALC88B) is embedded in the motherboard. I think the problem started after an update.
YaST2-> Sound Configuration
SBx00 Azalia(Intel HDA)
* Configured as sound card number 0
* Driver snd-hda-intel
Radeon X1200 Series Audio Controller
* Configured as sound card number 1
* Driver snd-hda-intel
on the down right corner
Other-> PulseAudio_Configuration
an error message apears PulseAudio is not installed or cannot be configured.
If I try to install the package alsa-plugins-pulse
Warning:
!alsa-plugins-pulse-1.0.23-1.9i586 requires pulseaudio, but this requirement cannot be provided.
Well almost no sound. The only way to get sound out is if i use the following command
speaker-test -D plughw:0,7 -c 2 /dev/urandom
I have the following line in /etc/pulse/default.pa
load-module module-alsa-sink device=plughw:0,7
But when i play any applications i hear no sound. For example "mplayer zion.mp3" results in silence.
When using pavucontrol, i see the sound bar moving for the hdmi hardware device. But i still hear nothing.
Does anyone know what could be wrong?
Can someone provide me with the exact instructions I need to backtrace pulseaudio? I have a bug that a developer is asking me to do a backtrace and the instructions on the ubuntu site aren't very good. I tried exactly what it said and my problem is that it says to "run the program under gdb by doing
gdb pulseaudio 2>&1 | tee ~/gdb-pulseaudio.txt
unfortunately pulseaudio isn't actually starting when I do this (I kill the program before I do this command, I also add the appropriate text file so pulse doesn't auto restart). Not sure what's going on but I'd appreciate any help as I can't get sound out of HDMI (I get it but it dies out fast).
For my mythtv/router box I'm trying to get the sound working trough hdmi as well as over the analog out. Because the HDMI is located on the mainboard and has something to do with the video driver I downloaded and installed the following:
ATI Catalyst™ 10.3 Proprietary Linux x86 Display Driver94.2 MB10.44/28/2010
However the output aplay -l is showing me(I got hdmi sound working on my laptop) isn't the same as on my laptop, it does not show the hdmi "sound card"
here is the output:
Code:
~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
[code].....
I prefer sound trough hdmi but for the HDMI to work I previously needed to be able to see the HDMI device listed by aplay -l
flash version 10.0 r45 in firefox plays video, graphics, and sound just fine. however, while i'm playing a video on videos, or listening to pandora, the sound could unexpectedly crash. when this happens, sound doesn't just stop playing. it keeps playing but loops the sound every second or so - it's kind of strange to describe; the sentence, "hello, how are you?" could sound like "he-he-he-he ar-ar you-you-you". has anyone experienced this? i say it happens 'unexpectedly' because i can't replicate the crash on demand, but it happens in every firefox session. it seems that it does not matter what i'm doing - i've tried crashing it by making a flash video full screen and exiting continuously etc. because sometimes it happens when i'm going to full screen or changing tabs.
however, most of the time it happens when i'm not even touching the computer - i'm not sure if some background process can cause flash's buffer to overflow, or whatever. other times, it doesn't even need me to play anything for it to crash the sound in flash - it could loop sound from the first time i tried playing it in flash in that ff session. even when i exit firefox or pause the sound it takes a few second for the loops to stop. however, when i restart firefox the sound is fine until it crashes again and i have to restart, again! i tried removing libflashsupport as i read in other threads that it causes sound issues - no luck there. i uninstalled, installed and all that jazz. tried strace - doesn't report any flash errors for some reason, or as far as i can understand.
i also installed the flash debugger for use with the firebug extension, flashbug addon in firefox, but i'm not getting anything there either - i think it can't locate the flash debugger, although it lists the right version. i haven't had this problem with chromium yet, but i mostly use it when flash sound in firefox crashed and i don't want to reload ff; i think they use the same 'libflashplayer.so'? also, just to clarify, sound from the mplayer plugin works fine, and when the sound crashes in flash it does not cause ff to crash and quit. firefox continues to run normally but when i play sound in flash it starts looping. i've had sound problems in the past and i'm thinking there is something i messed up in the packages i have installed. i uninstalled pulseaudio because it was the only way i could find to get my skype working. how would i know if there are conflicting elements?
here's what i get from 'lsof | grep snd':
code:
firefox 956 angelos mem chr 116,4 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 120r chr 116,2 0t0 3751 /dev/snd/timer
firefox 956 angelos 122u chr 116,4 0t0 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 123u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 4518 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
knotify4 4683 angelos 12u chr 116,8 0t0 3874 /dev/snd/controlc0
kmix 4690 angelos 10u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 8563 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
it seems to me like there should be a conflict between all those using the same sound control? however, why would it just happen unexpectedly? also, is there a way that i could dissociate sound from firefox without having to reload a whole session with many tabs?
HDMI outputs video but not sound from my Acer Aspire 5738 laptop.I have tried both SMPlayer and VLC setting both audio outputs to HDMI.Those media players have always worked for me using other Linux distros.Is there another media player that I should be using?If it's important;lspci lists;Audio as ATI and Video as ATI Mobility Radeon HD 4500
View 2 Replies View RelatedI can not get any sound through my HDMI cable. Sound through my headphones works fine. But when I want sound to go through the HDMI and play on the monitor, there is no sound.
The HDMI cable is connected to my Radeon R9 270X graphics card.
My OS version is 8.1.
It works on Windows 8.1, so it is definitely an operating system problem.