I get this error.
org.freedesktop.UDisks.Error.Failed: Requested filesystem type is neither well-known nor in /proc/filesystems nor in /etc/filesystems
I have no idea what that means. But I'm on the verge of uninstalling I really need access to my NTFS drive.
Can mount.ntfs and mount.ntfs-3g reside simultaneously?
Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?
I try to mount an image from a NTFS partition. Below is not working.
sudo mount /windows/D/img/XPLANE9.mdf /media/XPLANE9/ -t iso9660 -o ro,loop=/dev/loop0
I first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
I used to be able to mount my external hard drive's ntfs partition by simply clicking on it, but now I can't anymore... I know that the last time I've used it with windoze, I had to force shut the **** thing down 'cause it was frozen real good (pretty unusual right !?!).The thing is, with ubuntu it sees it and mounts it no problem.
View 2 Replies View RelatedI've dual boot: opensuse 11.2 and Windows XP. Howto mount and write to ntfs partition using /etc/fstab?
View 3 Replies View RelatedI Just Recently Installed OpenSUSE with GNOME Desktop and was surprised to know that none of my NTFS Partiitions were mounted to the Linux File System. Earlier I had Installed Open SUSE with KDE Desktop and there were no problems, everything was readily mounted and i could access the NTFS Partitions. I am a Total Newbie To Linux. Give Me The Syntax To Mount The NTFS Partitions in Following Partition Table Acquired with fdisk :
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Partition table entries are not in disk order
I want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.
View 1 Replies View Relatedi want to mount NTFS by normal users so i used the following entry in fstab /dev/sda6 /media/Mostafa ntfs-3g noauto,exec,rw,user 0 0 however when i try to mount the partition i get the following error Unable to mount Mostafa
Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sda6': Permission denied
Failed to mount '/dev/sda6': Permission denied
Please check '/dev/sda6' and the ntfs-3g binary permissions,
and the mounting user ID. More explanation is provided at
NTFS-3G Questions at Tuxera
[Code]...
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
When I installed OpenSuse 11.2 it mounted I configured to mount all of my windows/NTFS partition. However, one problem is that only root can write to it. I was trying to change it to '777' permission. However, as root I can't change permission. chmod doesn't work and neither does using nautilus (as root) work.I even tried unmounting it and then doing a chmod. That didn't work either.
View 1 Replies View RelatedI am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
About dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I tried so many commands.
mount -t ntfs
ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies View Relatedi have an ntfs partition that i want to mount. before 10.4, all i had to do was add:
Code:
/dev/sdb2/media/Sharentfs-3guser,auto,locale=en_US.utf800
to the fstab, and it would be mounted on startup, but now i can't do that. when i try to
[code]....
I tried
Code:
sudo mount /dev/sda2
but it doesn't work. i tried
Code:
sudo mount device /dev/sda2
, nope. what are the commands?
I tried few command to mount NTFS system that I know works....but mount LVM with NTFS like this absolutely failed me....
Commands that I tried...
Code:
mount -o loop,offset=32256 /dev/storage/games /windows
mount -o loop,offset=32256 /dev/storage/games5 /windows
mount -t ntfs-3g /dev/storage/games /windows
mount -t ntfs-3g /dev/storage/games5 /windows
[Code]....
Recently installed ubuntu 10.10 and rather like it but been trying to setup and configure everything so its a feasible alternate OS.
I have a problem where one of my hard drives doesnt show up in places.
The drive works fine in windows.
The information provided to me by Disk Utility says:
Model: ATA WDC WD 10EADS-00L5B1
Partitioning: Master Boot Record
Device: /dev/sdb
Partition Type: HPFS/NTFS (0x07)
Now i have a total of 4 drives, windows 7 on one, linux on one, and 2 storage. Linux recognizes my main windows drive and my 2 TB storage drive, but not this one for some reason. I assume it has to do with the partition type? Disk utility just shows its parition bar image as 'unknown' so yeah. Now there is one error during boot related to this but i can't read it fast enough to remember it all, all i see is the sdb label real quick.
We have a VMware box that is connected to a Thecus. The Thecus FTPS the WMware virtual machines onto a PC which has a 2TB drive.
We are trying to see if we can get the FTP'd VMware Virtual machines to run on another WMware node.
However Vmware use's NFS so we can't mount the drive as it's NTFS.
We are attempting to mount the NTFS drive in ubuntu. Can this be done and can it be turned into a NFS share without formatting the drive.
im looking for a command for mounting an ntfs partition. what i want to do is to put that command to the "after startup applications" option. that's because that ntfs partition is my storage partition, i play steam games [win7 dualboot, thats why that partition is ntfs], download movies etc. in my places menu, its called 190GB Filesystem, and when i click it, it mounts up. but that means i have to click it everytime i boot up, because vuze can't locate the files if it isnt mounted.
by the way : /media/7C1EE4E21EE49684 when its mounted
I have a 3T hitachi hard disk partitioned by Windows 7 and formatted as NTFS that I'm unable to mount under Ubuntu 11.04. The disk is in an external enclosure connected via USB2. Windows 7 has no problems seeing the partition and mounting the drive.
[Code]....
I want to access suse to vista. I am trying this command but I didn't.
mount /dev/hda1 /win/c -vfat
I have 64GB USB stick NTFS formated. I'd like to exchange files much bigger than 4GB between windows and linux. FAT32 doesn't support files bigger than 4GB. Is it possible to mount NTFS RW under Debian Lenny?
View 3 Replies View Relatedntfs-3g /dev/sdb1 /media/sdd7 ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 6 has no FILE magic (0x0) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
how to mount an ntfs formate in linux??
View 6 Replies View RelatedI am facing an issue in linux El4,I want to mount NTFS USB Hardisk to linux, I tried to mount but i got fs related error, after I have installed ntfs-3g, then i tried to mount through this command (mount -t ntfs-3g /dev/sdb1 /mnt/usb) but now i getting Fuse error, is there any possibilty to mount NTFS disk to linux EL4 without install Fuse.
View 3 Replies View RelatedI am using Red Hat 5.5.I am trying to mount a USB Drive that is formatted as NTFS.Red Hat is saying it can not mount NTFS drive
View 2 Replies View Related