OpenSUSE :: Configuring Suspend Scripts Or Hooks
Apr 9, 2010
Is there anyone who can give a few pointers on how to go about controlling the Suspend/Wake process e.g. by using hooks. I know there are a few support pages on the site that refer to this but when it come to the details they are not as clear as they might be for someone new to Linux. (I assume that since 11.2 uses pm-utils the Powersave Project is not relevant to me, for example).Also any tips on restarting PCMCIA card services would be appreciated. Do I need to install pcmciautils?
View 4 Replies
ADVERTISEMENT
Feb 20, 2011
I'm running Ubuntu 10.04.2 LTS, and when I go to "administration"->"software sources", it replies with a warning pop-up:"Please run this software with administrative rights. To do so, run this program with kdesudo".
View 3 Replies
View Related
Aug 12, 2010
I was going through a code that actually is PPP daemon(pppd) and in there it is creating some hooks saying Initialize hooks with corresponding function pointers.
View 2 Replies
View Related
Mar 29, 2011
what are hooks and how to write them
View 2 Replies
View Related
Jul 8, 2009
I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.0 (i586)
[Code]...
View 9 Replies
View Related
Oct 25, 2010
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies
View Related
May 23, 2011
3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
View 1 Replies
View Related
Nov 13, 2009
I just upgraded my AMD64 Phenom X3 on Asus M3A76-CM mobo from OpenSuSE 11.1 to OpenSuSE 11.2. The upgrade didn't go smooth, but it went through after some glitches. I posted this from the system running OpenSuSE 11.2. The problems I have encountered are the system crashed when I tried to Suspend to RAM and/or Disc. The display just showed the Penguin sideway with the bar went down to about 85%. BTW, why shows a Penguin sideway when the system is suspended to RAM/Disc? If one wants to show a Penguin sleeps, it should be standing and not laid sideway.
View 9 Replies
View Related
Mar 3, 2010
I just wondering if there is such widget that I can put 'suspend to disk' and/or 'suspend to ram' onto my main panel like the logout button.I do not use 'Application Launcher' much but that is the only place I can find 'suspend to disk/ram' options/buttons.
View 7 Replies
View Related
Oct 24, 2010
I have a 11.3/KDE4.5.2 desktop that I plan to use as a media server, connected to an HDTV/HDMI display and receiver(for audio).I frequently connect to it from another PC (also 11.3/KDE4.52) using any of the following:ssh for a CLI sessionvncXWindows application on a Windows machineI have suspend up and running (suspend to ram) but I am only able to initiate it from the local console.Is there a way to enable Suspend via any (or all) of the above remote connections?
View 4 Replies
View Related
Apr 30, 2011
This isn't the biggest deal in the world, but I would like to know how to suspend to ram with qdbus in order to make a shortcut. I used to (11.3) do: qdbus org.kde.kded /modules/powerdevil suspend 2 and make the shortcut meta S. Now in 11.4 if I manually type it into terminal qdbus says it cannot find .suspend in /modules/powerdevil at org.kde.kded. Did something change in 11.4? I also tried accessing it from org.kde.Solid.PowerManagement to no avail.
View 3 Replies
View Related
Mar 3, 2010
I've upgraded 4 boxes (32- and 64-bit) from Suse 11.1 to 11.2 with no unresolvable issues. Now I'm stuck with my 5th box, a Dell Dimension 8400 desktop box (yes, an old brick, 32-bit). I can suspend to RAM ("suspend") and to disk ("hibernate") fine, but resume seems to fail. In Suse 11.1 I used kpowersave (GUI in the sys tray) to suspend to RAM. For some reason, it couldn't suspend to disk but that didn't bother me. kpowersave relies on the powersaved running.
Note I had upgraded my 11.1 installation to all shiny and new KDE 4.3 stuff, and while KDE 4.3 seems not to use powersaved (and thus kpowersave) all worked fine. Upgrading to 11.2 has removed kpowersave and powersaved. I don't mind switching to another way if only I could find documentation what's being used on KDE 4.3 (and/or Suse 11.2). All I find by googling is that the daemon used is powerdevil, and that I should use a GUI for suspending (this battery monitoring plasma app).
Well, if I do that on this box it simply does -- nothing. So I tried s2ram and a2disk directly:Running s2ram with the --force option works, but the box doesn't resume. Goes on, screen stays blank, mouse and keyboard don't work. s2disk complains about not being able to "stat the resume device file". I gave it the --resume_device /dev/sda6 option, and it hibernated fine. But it doesn't resume. Pressing the power on button just starts Suse anew (and recovers the file system journals, so I assume it thinks it has crashed before).
So I think I have 2 questions:
What the heck does Suse 11.2 use for suspend/hibernate and resume? Is there any how-to available to learn what I need to configure?
Why can't I resume from successful s2ram or s2disk operations? /var/log/pm-suspend-log or pm-powersave-log don't provide any clues.
View 9 Replies
View Related
Aug 4, 2011
I have a Toshiba Satellite A300, and a have tried 10.3 live cd.After the boot I can't use the hotkeys by FN key, and the CPU fan isn't run althought 100%cpu usage.After suspend and resume, CPU fan starts immediatly and hotkeys are worksMy question is, how can I find the command which runs after resume, what fix ACPI problems?
View 1 Replies
View Related
Jan 20, 2011
After i click hibernate system begin to, but then it returns from suspend progress bar back to screensaver.
from dmesg:
Code:
[56908.741010] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[56908.741016] PM: Basic memory bitmaps created
[56909.338255] [drm] Requested: e: 20000 m: 0 p: 16
[56909.338259] [drm] Setting: e: 20000 m: 0 p: 16
[code]....
View 9 Replies
View Related
Mar 8, 2011
Suspend "appears" to be working for me but not quite:1) the screen says "done" (3 lines of text) appear2) the screen never shuts down, nor does the "done" messages disappear3) it returns from suspend by both keyboard activity and the power button4) the pc doesn't go silent, some fans or something still making sound 5) the pc power light blinks indicating suspensionActually the pc doesn't really suspend as not only do fans run but the optical drives open and appear to read (based on blinking lights)In 11.3 suspending seemed to actually suspend and hitting the power seemed to bring it out of sleep but the monitor never came back on (indicator light displayed off color) so the suspend functionality was useless
View 9 Replies
View Related
Mar 1, 2010
I have installed dansguardian and squid on my home computer and I need to configure them. the only problem I couldn't find any manual only one for opensuse 9. And even there the part after "acl CONNECT method CONNECT" doesn't make any sense to me.
View 1 Replies
View Related
Oct 29, 2010
Does anyone know of a good tutorial for installing and configuring Nagios on OpenSuSE 11.x?
View 3 Replies
View Related
Jun 16, 2011
Comp Specs:
Dell Laptop
OpenSuSE 11.4
GNOME
2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux
Drive Specs:
Kingston External SSD Drive 128GB
Ok, so for the last couple of weeks I have been playing with trying to configure auto-mounting my SSD drive. But it seems SO confusing trying to get this configured correctly. Between HAL, udev, autofs, automount, auto.master file, etc I feel like I am getting more confused the more I read about it.... Not really sure how these work or how they are interconnected if at all?
First: At first when I plug in my USB SSD Drive it automatically mounts to "/media/SSD" (but this is not where I want it mounted, for a few reasons). "SSD" --> is the volume label as well.
Second: Then I tried adding this line to fstab:
Code:
When I add that line I can see during the boot message/log that it is waiting for me to plug it in so that it can mount it. Which is nice but I don't always need it plugged in at that moment. Also, after adding that line, when I plug the SSD in, it no longer automatically mounts it anywhere.
Third: Then I tried using the auto.master file to automount the drive (used this tutorial to do that --> Configuring Autofs). Added the following lines to auto.master (Not at the same time though, tried each separately):
Code:
Code:
After doing the above and then restarting autofs I saw the following as the last line of the mount command (which seems VERY strange):
Code:
Which also will not allow me to umount it? Tells me it's busy.
So basically I would just like to be able to plug in the USB SSD and have it automatically mount to "/mnt/SSD". Could anybody give me a hand with this?
Also, I would LOVE to know how these things work or how they work together (HAL, udev, autofs, etc...)
View 5 Replies
View Related
Dec 22, 2009
I'd like to get the scroll wheel's left and right tilting to work in firefox (go back and forward one page). A lot of the forums suggest ways to do this with xorg.conf, but I see that it's been removed in 11.2. The only mouse support in Yast is this "text console mouse model" thing- what is that?? At any rate, it doesn't have Logitech LX or MX series mice in its list.Any suggestions for getting this to work? Am I going to have to create an xorg.conf file, and what will break if I do? Any ideas what the direction is for Logitech mice in openSUSE? It sure would be great to have better support for mice in this distro
View 1 Replies
View Related
Aug 24, 2010
I have a APC BR 800. How do I configure gapcmon for use with a USB cable? Must I use a network cable?
View 1 Replies
View Related
Jul 26, 2010
I have a devolo MicroLink 56k Fun LAN modem, which I could configure in openSuse 11.2 as an DSL device. With 11.2 it worked fine. But it isn't possible in 11.3 to configure it, because I cannot set the dial up internet provider phone number for this DSL device.I also tried it to configure it as a modem, but then it used the /dev/modem device, which is the wrong device for this LAN modem.
View 3 Replies
View Related
May 26, 2010
Firstly, wol works fine from shutdown and hibernate; it's just suspend which doesn't work.
I've got 2 types of workstations, all running 11.1. They both have this kernel:
2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux
Type 1 is a dell optiplex 745, bios version 2.4.1. Here's the relevant bit from lspci:
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
Kernel driver in use: tg3
Kernel modules: tg3
[Code]....
The fact that it's happening across two different machines makes me wonder if it is some OS setting I've missed, but then maybe neither card/driver supports it from suspend.
I'd really like to get them waking from suspend because training users to use suspend rather than hibernate would be a pain. Also, being able to configure such that it only wakes from suspend and not hibernate/shutdown, as implied in the bios, would allow me to wake machines up for backups etc only when the users are here, rather than on holiday/seconded to another department etc.
View 1 Replies
View Related
Dec 24, 2009
I'm running openSUSE 11.2 on a Thinkpad T61p with nvidia graphics. I'm running the proprietary nvidia driver.The battery ran very low and the computer suspended itself. After I woke it up, the desktop is completely black.After troubleshooting as much as I could, I did ctrl-alt-backspace, which brought me to a normal (non-black) login screen. However, as soon as I logged in, I was back to a completely black screen. But the system is operating.I rebooted the computer (warm reboot as well as cold restart) and each time the video is normal until I get to the desktop and all I get it black.Everything was normal until the pm suspend.Suspend has never worked exactly right, so I don't normally use it. But in this case, it used itself Next step: I logged in to console mode and looked at the logs. The only messages of interest seem to be in Xorg.0.log I found a couple error messages that might be of interest:
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(II) UnloadModule: "nouveau"
[code]....
View 9 Replies
View Related
Aug 5, 2010
I just installed openSUSE 11.3 but cannot get hibernation (or suspend to disk) working. It does not go to hibernation but instead it just locks the screen. The relevant error in /var/log/pm-suspend.log looks like below.
According to /usr/lib/pm-utils/sleep.d/30s2disk-check '/dev/dm-1' must be the swap partition. What i don't understand is that why the error says swap partition is not active. There is no error for swap partition during boot time. Boot message says that swap partition is activated.
/usr/lib/pm-utils/sleep.d/06autofs hibernate hibernate:Shutting down automount ..done
success.
/usr/lib/pm-utils/sleep.d/30s2disk-check hibernate hibernate:INFO: checking for suspend-to-disk prerequisites...
ERROR: resume partition '/dev/dm-1' not active, can not suspend
[code]...
Below is fdisk -l information for the disk which has swap partition.
/dev/dm-0p1 1 2089 16779861 82 Linux swap / Solaris
Partition 1 does not start on physical sector boundary.
/dev/dm-0p2 2090 3395 10482431+ 83 Linux
[code].....
View 5 Replies
View Related
Mar 29, 2011
There is an intermittent problem with resuming from s2ram. Occasionally, the power button is pressed to resume, the screensaver comes on but the animation is frozen along with the mouse and KB. Sometimes the desktop will show although with the same frozen condition. My swap parition is 2GB. I read in the forums that a small swap partition may cause a somewhat similar condition. I also read a recommendation to disable powersaving and screensaver, again not for my exact symptoms. I would like to find the root cause even if it takes some doing. Otherwise, the system rocks (except Amarok never worked but Kaffeine works for sound). Here are the system specs:
openSUSE 11.3 x86_64
KDE 4.4.4. rel 3
HP xw9400 Workstation AMD 64 Opteron
OCZ Vertex 60GB (dedicated system drive-single boot)
[code]....
View 9 Replies
View Related
Aug 16, 2009
I use:
OpenSuse 11.1 with KDE.
I wish: no session restoring on login and no confirmation dialog on logout � i.e. OpenSuse should never ask me, if I click on �shutdown� and always start with new session.
I do: So, in �System Settings� -> �Advanced�-Tab -> �Session Manager� I choose follow options:
General:
NO Confirm Logout
NO Offer shutdown option
On Login:
YES Start with an empty session
Default shutdown option:
YES Turn off computer
(finally, it goes disabled)
The problem is:Now I can't shutdown my computer by clicking the �Shutdown� in main menu. I can click it hundred times � nothing happens. Could anybody explain me, why???
As an experiment:If I choose �YES Confirm Logout� and click the �Shutdown�, I will see the confirmation dialog, but with only one option - �Logout�.
View 2 Replies
View Related
Aug 26, 2010
I'm new -and inexperienced- Suse user, I have a new laptop with an ATI 5650 graphic card. I have been using the Radeon driver with very low performance for a while. this driver was installed following the "Xorg -configure" procedure as descibed in the forum. Today I installed the newly released driver from Ati. this is what I did:
1) in /etc/X11/xorg.conf I changed "radeon" with "fglrx"
2) I run the driver downloaded from the ATI website
3) I run the command "aticonfig --initial"
I'm no longer able to start the X server (the computer boots to full console) and I have no idea how to go forward. if I give the command "startx" I get a "segmentation error" and I go back to console can somebody point me in the right direction?
View 1 Replies
View Related
Mar 14, 2010
I have called, I hope correctly, the first screen you see after the BIOS details - "the bootloader screen". If that is not the correct term, then I mean the screen against which GRUB displays your various OS boot options. For some reason, the bootloader screen only occupies the middle half of my widescreen monitor. The bootsplash screens and the login screen which come after it display correctly. I think they are controlled by the command vga=0x348Is there a way of stretching the bootloader screen so that, like the bootsplash screens and login screen, it extends to the full width of the monitor
View 8 Replies
View Related
Jun 29, 2009
I have been using OpenLDAP 2.4 with OpenSuse 11 without any issues but I now want to configure replication and can't see how it's done . The OpenLDAP 2.4 admin guide refers to the slapd.conf configuration file but this is not used by YaST.
View 4 Replies
View Related
Jun 11, 2011
I want to have an inn server running on my own server, both to relay my prefered newsgroups and to manage my own newsgroups.
I installed inn with YaST, but I'm lost in the inn documentation. I'm pretty sure openSUSE defaults solve most problems but can't find where I have to setup my own config
View 1 Replies
View Related
