Recently i've updated openSuse to version 11.3. But i'm experiencing strange behavior of Yast applications (y2base binary). I can open them but can't close. For instance i'm trying to close "Software management" application after packages installation but it seems that its parent restarts it immediately after i close it
View 3 RepliesTurned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.
Whatever I tried to download & install displays an error message
Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.
I'm running 11.2 64bit KDE 4.4.3
Upgraded from v11 to 11.3Now when I'm using my voip application and open a ..... video the sound from both applications mixes. It seems also that I have less kmix control.
View 9 Replies View RelatedI am having trouble to update my pc using yast or yast2
Bad media attach point: Index of /debug/distribution/11.2/repo/oss
when i run installation_sources -s command i get
# | Alias | Name | Enabled | Refresh | Type
--+-----------------+-----------------------+---------+---------+-------
1 | openSUSE 11.2-0 | openSUSE 11.2-0 | Yes | No | yast2
2 | repo-debug | openSUSE-11.2-Debug | Yes | Yes | NONE
3 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes | yast2
4 | repo-oss | openSUSE-11.2-Oss | Yes | Yes | yast2
5 | repo-source | openSUSE-11.2-Source | No | Yes | NONE
6 | repo-update | openSUSE-11.2-Update | Yes | Yes | rpm-md
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies View Relatedi had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies View RelatedI know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies View Relatedin the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies View RelatedI'm staying with 11.1 (sic) because it works well enough, so what a pleasant surprise to find an update to Firefox 3.5 waiting for me inside YaST, I'd have expected only updates to 3.0.
View 1 Replies View RelatedYaST2 -> Package -> All Packages -> Update if Newer Available that YaST would install the most current in the highest priority repository. Given the example data below, I thought package A, version 01, which is currently installed from repository abc, would be updated to version 02 from repository xyz.
How do you get YaST to update packages from the highest priority repository?
Code:
Sample Data:
Repository: xyz package A Ver:02 priority:50
Repository: abc package A installed Ver:01 priority:99
I was updating all the installed packages on my system yesterday via YAST. The package manager seemed to hang when downloading a small update for YAST itself (related to ncurses, I think) so I hit the abort button. The package manager quit but now it doesn't work. Trying to start the software management module (Qt version) give me the following error:
UI Syntax Error
Couldn't load plug-in qt-pkg
Check the log file!
So I then tried the console version of YAST. The software management module doesn't work here either. It give me the following error:
UI Syntax Error
Couldn't load plug-in ncurses_pkg
Check the log file!
I Googled a bit and came to the conclusion that for the second error I should try the following command:
zypper install yast2-ncurses-pkg
But this just gives me another error:
zypper: error while loading shared libraries: libzypp.so.619: cannot open shared object file: No such file or directory
So now it appears that both YAST and zypper are corrupt!
I'm running OpenSuse 11.1 (this may be the thing that causes me to finally update ) with KDE 4.4 (specifically, 4.4.4 release 5). Recently (maybe the past month or so... give or take a week or two or so... first time I really remember it happening is when I realized they changed the repository for KDE 4.4 from factory to stable and switched them) >90% of the things I try to install via YAST fails with the following error... this example is me trying to upgrade avidemux from the Packman repository.
Code:
Error: RPM failed: warning: /var/cache/zypp/packages/Packman_Repository/x86_64/avidemux-2.5.3-4.pm.5.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 9a795806 error: %post(avidemux-2.5.3-4.pm.5.1.x86_64) scriptlet failed, signal 11
Oddly enough, the main avidemux package threw the error, but the avidemux-qt4 package didn't.
I've tried doing
[Code]...
I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.
Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)
Code:
Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running
[Code].....
what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies View RelatedI get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies View RelatedFirst is this:Whenever I open a file through - say - Open Office, the list of files I get shown automatically also show all the hidden files. Right click -> uncheck hidden files does the trick only for one session. If I hit Open again, they're shown again. How can I set it to not show hidden files by default in the 'open file' dialogue (for all apps)?Second is this:Under preferences, there's an item called 'preferred applications'. This is great, and works ok, but is way too general for me. How can I set that files with certain extensions always open with one app, and files with another extension always open with another app.
View 1 Replies View Relatedafter i udated to ubuntu 10.04LTS, i applied updates one night and after reboot the minimize, maximize and close buttons had moved from the upper right corner of ALL windows to the upper left corner. i would like to move them back to the original location but don't know where or which config file to look in.
View 1 Replies View RelatedI just upgraded from Ubuntu 9.10 to 10.04 and notice that the Close, Park, and Fullscreen Triad on each displayed window is located at the upper left corner. I am accustomed to seeing it on the upper right. Is this something fixed in the new version or is it something that can be changed? This is not a big deal but will take some getting used to.
View 2 Replies View RelatedIn my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
What does the red text in Yast mean? I installed a printer driver (Gutenprint 5.2.4) from here: software.opensuse.org: Download openSUSE 11.2) and when I view the installed packages in Yast, it shows up in red text. Why? (btw, that newer Gutenprint has the driver for my new Epson Artisan printer as well as my Samsung laser printer).
View 2 Replies View RelatedI report this issue since RC1 but the problem left unsolved .
I unable to start vsftp from yast .
i want to install openmosix.
someone told me is easier to do it with yast.
exactly, where do i have to go in Yast in order to install openmosix?
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies View RelatedUsing OpenSuse 11.2 RC2. After playing around to install the nvidia driver, Yast lost its beautiful initial colours (light blue, as the rest of the kde desktop) and became a bit uglier (dark blue, more rudimentary, etc; I think the default "unbranded KDE"'s colour).I have the KDE theme set either for the regular user and for root. I have also installed the packages yast2-theme-openSUSE and yast2-theme-openSUSE-Oxygen installed but, how shall I choose one of them?Some webs say that there is an option in Yast under "miscellaneous" to choose Yast's theme, but I do not have it.
View 5 Replies View RelatedI've installed OpenSUSE 11.2 and I'm pretty happy with over all system, the only issue that I had is with Yast, so far. It gives me alert for security patches but no alert for Software update. When I did "zypper up" as superuser I saw that there are updates available for more that 14 applications but yast didn't show me.
if there is any setting for it or should I file it as a bug.
From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
When I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh
It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.
Yast-gtk sw manager - is there a way to reinstall an rpm? There is in the qt version but can't see how in gtk.
View 9 Replies View Relatedon opensuse 11.1, i was able to see my system logs using yast. but on opensuse 11.3 i'm not able to find it
View 9 Replies View Related