OpenSUSE :: Yast FTP Not Working In 11.3?

Jul 16, 2010

I report this issue since RC1 but the problem left unsolved .

I unable to start vsftp from yast .

View 1 Replies


ADVERTISEMENT

OpenSUSE :: Yast Automatic Backup Not Working?

Jun 9, 2010

I created a profile for Yast Backup and successfully executed it manually. However, when I set up the Automatic Backup with the same profile it doesn't work. It will start at the scheduled time and do the "search" part of it but it hangs before it creates the archive. These two processes (backup_cron & y2base) remains running and never terminates.

Here are the last few lines in the Yast log before it hangs:

Code:
2010-06-09 20:08:05 <1> londy(1957) [YCP] backup/ui.ycp:2037 subprocess started: true (PID: 1958)
2010-06-09 20:08:05 <1> londy(1957) [YCP] backup/ui.ycp:1827 Reading installed packages
2010-06-09 20:08:18 <1> londy(1957) [YCP] backup/ui.ycp:1735 Number of installed packages: 1281
2010-06-09 20:09:17 <1> londy(1957) [YCP] backup/ui.ycp:1842 Searching in packages started

[Code]....

View 2 Replies View Related

OpenSUSE Network :: Device YaST - Can't Identify YaST - "Unknown Network Device"

Dec 8, 2010

In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?

Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....

View 7 Replies View Related

OpenSUSE :: Red Text In Yast?

Jul 8, 2010

What does the red text in Yast mean? I installed a printer driver (Gutenprint 5.2.4) from here: software.opensuse.org: Download openSUSE 11.2) and when I view the installed packages in Yast, it shows up in red text. Why? (btw, that newer Gutenprint has the driver for my new Epson Artisan printer as well as my Samsung laser printer).

View 2 Replies View Related

OpenSUSE :: Get OpenMosix With Yast?

Jan 24, 2011

i want to install openmosix.

someone told me is easier to do it with yast.

exactly, where do i have to go in Yast in order to install openmosix?

View 9 Replies View Related

OpenSUSE Install :: Can't Use YaST

May 22, 2011

I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.

View 9 Replies View Related

OpenSUSE :: How To Choose Theme For Yast

Oct 30, 2009

Using OpenSuse 11.2 RC2. After playing around to install the nvidia driver, Yast lost its beautiful initial colours (light blue, as the rest of the kde desktop) and became a bit uglier (dark blue, more rudimentary, etc; I think the default "unbranded KDE"'s colour).I have the KDE theme set either for the regular user and for root. I have also installed the packages yast2-theme-openSUSE and yast2-theme-openSUSE-Oxygen installed but, how shall I choose one of them?Some webs say that there is an option in Yast under "miscellaneous" to choose Yast's theme, but I do not have it.

View 5 Replies View Related

OpenSUSE :: YAST Not Showing Updates

Jan 21, 2010

I've installed OpenSUSE 11.2 and I'm pretty happy with over all system, the only issue that I had is with Yast, so far. It gives me alert for security patches but no alert for Software update. When I did "zypper up" as superuser I saw that there are updates available for more that 14 applications but yast didn't show me.

if there is any setting for it or should I file it as a bug.

View 9 Replies View Related

OpenSUSE :: Gnome Install Using YaST Over KDE

Feb 24, 2010

From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.

That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###

So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.

View 5 Replies View Related

OpenSUSE :: Yast Can't Connect To The Internet?

Mar 3, 2010

When I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh

It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.

View 1 Replies View Related

OpenSUSE :: Can't Update Via YAST Or Zypper

Jun 10, 2010

Turned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.

Whatever I tried to download & install displays an error message

Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.

I'm running 11.2 64bit KDE 4.4.3

View 8 Replies View Related

OpenSUSE :: Yast-gtk Sw Manager - Reinstall An Rpm?

Jul 13, 2010

Yast-gtk sw manager - is there a way to reinstall an rpm? There is in the qt version but can't see how in gtk.

View 9 Replies View Related

OpenSUSE :: Unable To Yast Logs On 11.3

Aug 27, 2010

on opensuse 11.1, i was able to see my system logs using yast. but on opensuse 11.3 i'm not able to find it

View 9 Replies View Related

OpenSUSE :: YaST Keeps Downloading Repodata

Nov 18, 2010

How do I stop YaST from downloading the repodata every time I open the software manager?Even if I have opened it 5 minutes before, YaST still downloads the repomd.xml again.This is also a real pain if I am offline and trying to install an rpm, because I have to wait for it to realise that it can't access the data before it allows me to skip the auto-refresh.By the time that happens I could have installed the software already if I was using a debian or windows based system.

View 4 Replies View Related

OpenSUSE :: Any Way To Get Install History From YaST?

Dec 12, 2010

I can get the installation history via the command line:
Code:
rpm -qa --last | less

Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?

View 4 Replies View Related

OpenSUSE :: How To Import Yast To Debian

Apr 14, 2011

how to import Yast to Debian. I need to know the idea of ​​creating Yast. That is, Yast is designed so that each function has its own konfiguratsioony file whose name is invoked in the code when working with this function. And every function has a number of konfiguratsioonyh files?

View 5 Replies View Related

OpenSUSE :: Yast Different Interfaces In KDE And In Gnome?

May 6, 2011

I have opensuse 11.4 with gnome and kde, being kde the default wm. I have noticed that the interface of software management in yast in gnome is different from that in kde. There are several differences in interface and behavior but the most noticeable are the ones bellow. In gnome, in the bottom left corner appears a list of the number of all available, not installed, installed and upgradable applications. This is very practical because when I want to update applications all I need to do is to click on list of upgradable apps and all of them appear filtered on the right side allowing me to choose wich to upgrade. In kde no matter what view mode I choose that list never appears and this becomes very complicated since kpackagekit is very, very slow to build the list of apps to update. Furthermore, in gnome when I choose packages to install bellow the lists appears a link to view changes. Clicking there displays a list of all apps that are to be installed, the size of disk space that will be used and the size of files to download. On the other hand in kde all I can do is to click accept and everything starts to be installed without advice. Since I have a slow internet connection it takes much time to wait to kpackagekit to load the list of softwares. And I need to know the size of a download before engaging in it, because it may delay very much depending on its size. Currently I use kde as default and do everything in it almost all the time, but when I have to do some install I stop every activity in kde logout and login in gnome to do it. Sometimes it's boring but I have lived with this. However I have tried to get used to kde for all my activities because in next versions probably gnome will come with many changes. Indeed, since I like traditional menu and panel config I don't think I'll be able to tolerate gnome shell and don't know for how long gnome 2 will exist and be supported. So is there a way to launch yast software management in kde but with gnome interface or at last with the functions of gnome interface?

View 3 Replies View Related

OpenSUSE :: Using The Software Manager In YAST?

May 8, 2011

Using the Software Manager in YAST how do I determine who the packager of the file is? Is it appropriate to contact them and ask them to update the version?

View 4 Replies View Related

OpenSUSE :: Test In Yast But Nothing Else Has Sound?

Jun 12, 2011

Sound is not working. Clean install new home. Fully patched and multi-media stuff installed. It works in test in yast but nothing else has sound. There is a loud click when KDE starts. Also there is a delay before I can do anything. Tried changing the backends no luck. Also tried disable of phonon in Yast but have nor tried to remove it yet. Perhaps I should.

sound device nVidia Corporation CK804 AC'97 Audio Controller (rev a2)

View 7 Replies View Related

OpenSUSE :: Cannot Install Anything Using Zypper Or YaST

Jul 23, 2011

I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.

Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index

I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.

View 2 Replies View Related

OpenSUSE :: Yast Software.... Selection?

Sep 14, 2011

I just installed opensuse, and I really like it! I think I may be finally ready to switch from windows to linux 100%, despite years (literally) of wanting to.

Unfortunately, I can't seem to find any good software. I've enabled the packman repositories, or at least I think I have (I used the graphical tool, not the command line). But when I do a search for some programs, nothing comes up. Google chrome didn't even come up until I installed a repository special just for it.

No picasa, no nestopia, and formerly no chrome nor chromium. Is the software selection through packman just not as varied as ubuntu (which I barely played with before getting kernel panics out the whazoo)?

Also, I finally have a distribution where it isn't difficult to install proprietary ati drivers! I loved arch, but it was a nightmare; even if you did manage to install the drivers, you had to do a whole bunch of stuff every single time the kernel was upgraded... and it was rolling release! (Which I love, but somewhere I read that I shouldn't use the opensuse rolling distro version because of ati drivers, but I never really understood why.) However, ati catalyst didn't get installed. Is it a separate package?

Finally, and this is simply a tack-on for completeness, my wireless card doesn't work, and I followed the forums advice and it still failed, but I'm not worried because I'm ditching the broadcom and buying one better suited for linux. In the meantime, forwarding my wireless from my netbook to my desktop over an ethernet cable works miracles! I wish I had thought of this sooner; it would have saved me so much time lugging that desktop and monitor to the room with the router!

Hi all, and I have a feeling I'll be around here for awhile!

View 9 Replies View Related

OpenSUSE Hardware :: Mount Some LVs With Yast?

Feb 11, 2011

I'm migrating from one SATA disk to another with a fresh install on the new disk. The old disk is 1TB and seems to losing stability. So I've installed 11.3 on the new 500 GB disk and want to mount the old /home partition using yast but I keep on getting back a message that I cannot edit partition because it is in use so it won't mount. I guess I'll have to use the CLI to tell it otherwise, but could use some advice. I'm a GUI guy and I like to run a lot of hardware. Yast does recognize the old hard drive and all of the partitions it will add the partitions to a new logical volume, but won't let me mount or edit settings to tell it to mount.

View 9 Replies View Related

OpenSUSE Install :: Cannot Use Zypper Or Yast?

Mar 16, 2010

when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed

View 9 Replies View Related

OpenSUSE Install :: Can't Access Through Yast

Jun 8, 2010

Anyone know what happened to the nvidia repos and are they going to come back up?

Can't access it through yast, ftp, or a web browser.

View 2 Replies View Related

OpenSUSE Install :: 11.4 - No Updates At All In YaST

Jul 20, 2011

The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?

View 9 Replies View Related

OpenSUSE :: YAST: Unable To Create Repository?

Jan 12, 2010

Why does this happen? I am (this time) trying to install Atmel's gnu-avr toolchain. Atmel's web site gives the repository as http:www.atmel.no/avr32/suse/11.0/i586. I put that into YAST2's repository manager, and it comes back with "unable to create repository from URL..."

Why does this happen? It's hardly unique to the Atmel repository: in fact, it seems to be YAST's default behavior on ANYTHING other than the official SUSE repos.

Is there some way to fix this, or bypass it with some other installation tool, so I can get the software I need?

View 6 Replies View Related

OpenSUSE :: How To Install Vuse 4.3 Via RPG / YaST In Two Clicks

Jan 29, 2010

If you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.

Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)

The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.

View 3 Replies View Related

OpenSUSE :: Bug On Fingerprint YaST Configure / Solve This?

Feb 13, 2010

I have installed openSuSE 11.2 and my fingerprint reader have been detected on Hardware Information. But when I try to enable it on "Fingerprint Reader", it throws an error: Cannot write PAM settings as you can see on the following pic:

Is there a way to solve this problem?

View 1 Replies View Related

OpenSUSE :: Auto Update With Yast Failing?

Apr 14, 2010

I am having trouble to update my pc using yast or yast2

Bad media attach point: Index of /debug/distribution/11.2/repo/oss

when i run installation_sources -s command i get

# | Alias | Name | Enabled | Refresh | Type
--+-----------------+-----------------------+---------+---------+-------
1 | openSUSE 11.2-0 | openSUSE 11.2-0 | Yes | No | yast2
2 | repo-debug | openSUSE-11.2-Debug | Yes | Yes | NONE
3 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes | yast2
4 | repo-oss | openSUSE-11.2-Oss | Yes | Yes | yast2
5 | repo-source | openSUSE-11.2-Source | No | Yes | NONE
6 | repo-update | openSUSE-11.2-Update | Yes | Yes | rpm-md

View 2 Replies View Related

OpenSUSE :: Can't Find Downloads In Yast Installer - Add?

May 25, 2010

Have open suse 11.2 on a laptop, everything works fine except installing software i've downloaded. trying to use RPM downloads. finally something worked, connected to internet and software manager, Yast, decided to work right, got a bunch of stuff i needed( open office, etc) but cannot find my downloads in yast, installer. how do i add, to installer? I have tried many times in vain to install via Make and make install, etc commands

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved