OpenSUSE :: Backup And Restore Local Folders In K Mail?
Mar 4, 2011
How to backup and restore local folders in K Mail. I understand that this is a rudimentary question-- under K Mail in 11.2 there is no backup and restore option for local folders (that I have been able to find anyway). I use 11.2 on this machine where I do all e mail, browsing and everything pretty much internet related. I am going to upgrade to 11.4 in another week and want to make sure that I understand backup and restore procedures for K Mail...in case something untoward happens during the upgrade to 11.4.
I'd like to know if there is a way to backup mail folders, as they are. I already tried trough the "file" menu saving function, but it seems to be available for single messages, otherwise it saves more selected messages as unique file. I'd like to manage mails directly on backup support, one by one if I need...
I'm using ubuntu for a few weeks now and i created a backup script that can copy some folders into a .tgz file. Now i want to place back the folders to where they come from and overwrite the original folder. like the /home folder in the .tgz file overwrite the /home folder on my harddrive. I already tried to do this with: tar xvpfz filename.tgz. But after that the folders came in the same folders as the backupfile stands.
I do regular full and incremental backups using dar. All disk volumes are labeled and mounted by label. There is no other operating system installed. I built a new system but due to having to RMA a disk, I built the openSUSE system on a disk from the backup cycle. This Maxstor disk has problems which is why it was moved into an external box and the backup system. I now have a replacement disk and wish to replace the Maxstor before it dies. I initially tried a disk to disk clone with clonezilla but this died complaining that a small target partition was smaller than the source partition. It had created the partition and the start and end sectors were identical. There are no problems with the new disk.
I decided that it would be a good opportunity to test a full system disk restore from the backups. I have in the past restored individual files and partitions but have never restored onto a bare boot disk. I have restored and labeled all 6 partitions. The partition containing / has been marked as active. /boot is included in the partition containing /. fstab is valid, menu.lst is valid, device.map needs editing but this is not a problem.
What do I need to do to make this disk bootable. I have looked through the GRUB documentation but if you try some standard GRUB commands in 11.3 you get messages saying don't do this use YAST. I have seen other suggestions ranging from trying to start the not supported system repair option to using dd to copy the MBR which seemed to trash the partitions in the users extended partition.
The YAST bootloader displays "boot from the root partition". I assume that this is currently what is happening rather than what YAST thinks might be a good idea for next time. I suspect that all I have to do is dd the first 512 bytes of the root partition. If this is the case I can add this to the backup process. While I automate backups I do not automate restores. Each restore tends to be different and I am not sure of the best way getting grub to work on a bare disk restore.
I wanted to know if there is variant of RollbackRX (www.rollbackrx.com.au) freeware or payable. RollbackRX used to Backup/Restore whole system changes in less than 1 minute before OS boot. And it does not consume a lot of free space.
For some time Ihave copied my email folders in .mbox format to files which I then can save to cd. Unfortunately, these files are one (very) large concatenation of email text+attachments which are very inconvenient when searching for a lost email. Question:how to backup emails from within Kmail? And, yes, I did read the Kmail manual cover-to-cover and found nothing relevant.
Running knode with 11.3 and KDE 4.5 (same problem with 4.4) it is impossible to drag articles into local folders. Indeed there seems no way of using local folders at all. Is this a bug, or something wrong with my setup?
I am now preparing myself to upgrade lenny to squeeze and decided to do a backup on my system. I used backup-manager to do the job and it worked fine. how do you restore said backup data?
does anyone know of a good backup software for Ubuntu 10.4 that will let me select which folders to backup, rather than a complete backup? My install and settings etc can be replaced, but my photos and memories cannot!
I just added my login id to /etc/aliases to forward root's local e-mail to my local e-mail account in evolution.
As always, when I make a change to /etc/aliases, I run newaliases. I now get the following, and root's mail is not showing up in my local mail Inbox:
Code:
Is this correct?
I understand my hostname (i.e., Eng-Lab-010) is not a fully qualified host name, but I never had a problem before. But it appears this not a good thing. What should I do?
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
How can I split my local mail box into an individual files for each mail. The senario of mine is I fetch some emails from a mail server into my local linux box with fetchmail command but I want each fetched mail in a different indivitual file for easy file processing and manipulation for example sending those email through sms and so on
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com hi there [CONTROL-D]
One Laptop. One hard drive. Two OS's. Windows 7 is shot to hell from installing and uninstalling to much crap. Windows & WILL rewrite my MBR. How do I back up my far superior GRUB MBR and restore it over the wincrap MBR once I am done reinstalling Windoze?
I'm now using Ubuntu 10.04 with ext4 and for the second time in my life I experienced data loss (not for real: I got backups) and I'm assuming problems with the recent ext4 fs.
I want to restore all of my configurations (/etc and the like), data and home on reiserFS: is this possible? What to do in order to accomplish that?
Im running ubuntu 10.04 and I recently had a little adventure whilst trying to disable KMS and deleted all the stuff out of the # kopt line and added the nomodeset thing.Now I crash to easybox everytime I try to boot, how do I restore the backup of said file that I noticed beside it in the folder. Also I saved one to my desktop.
I have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
I have Lenovo IdeaPad z510 laptop.My HDD SMART status is currently "failure". As my laptop is under warranty I can return it to lenovo. So I want to backup as much data as possible (everything is readable). I currently have 3 operating systems: linux xubuntu 14.10, debian 8 and windows 8.1 (triple-boot?). I want to back up only my current debian installation. There are 3 partitions for debian: root (about 50GB), home (>200GB) and swap. I know that I can backup the whole partition using:
And create .tar file with the whole home directory.
how to restore it later. In /etc/fstab there are references to UUIDs, and as I understand, with new HDD these UUIDs would be different. And possibly the whole partition table would be different. And how would I restore GRUB?I can't make full image of my disk simply because I don't have disk to store it on.Is it possible to create backup on my current debian installation without actually making full HDD backup? Would it work if I would install debian on new disk, then from LiveCD overwrite it with my backup and modify /etc/fstab to match new partitions?
My laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
I have fedora 12 (amd64) on desktop. I was wondering if there a way to backup and restore all my downloaded updates since installation?! In the same manner that debian has aptoncd. I am planning to migrate on all data to a new partition with clean install and then just move the updates there.
How to Backup & Restore Installed copy of my UBUNTU 10.10.If I create any ISO or Recovery CD /DVD, saves time to fresh install & update & install favorable software.I use Mobile to connect, works slow to download.
I'm trying to use this tutorial (URL...) to backup my Ubuntu 10.10 (ext3) operating system. I've successfully gotten it into a TAR file on my external hard-drive, but inside the archive are 2 folders: sda5 and media (/media/sda5/), sda5 ofcourse containing my operating system.
I run VMWare as my virtual machine software, but I could easily run Virtual Box if the situation calls for it. On my virtual machine I created an Extended partition, made a 2GB swap space and the rest is ext3 (ext3 space is mounted as sda1) (at this point, Swap is OFF) here is what I've tried to do inside the virtual machine to restore:
Code: sudo -s mkdir /media/FROM/ mkdir /media/TO/ mount /dev/sdb1 /media/FROM/
[Code]...
but instead it just creates the directory sda5 under media of the live ubuntu cd Do I need to CHRoot in these conditions? AFTER I get the files successfully into the virtual machine, how do I go about restoring the grub2 bootloader? Right now I haven't tried to restore grub on my hardware, but I would be interested in doing so. There are a vast immense amount of forum posts about this subject, but all are to mixed results. Can anybody tell me the absolute definite way to restore grub2 successfully, I don't want to try something if it's going to mess up my install, whether I've backed up or not.
for further reference, here is a link to the previous (failed) thread I made about this same subject:
