Networking :: Windows PC Slows Down My Network ?
Dec 12, 2010
I have a Actiontec m1000 modem from Qwest that seems to offer more speed to my brothers Windows PC then my Linux PC (same make and module) I checked the ping on all systems, and they all look fine. The only thing that seems different is the number of open sessions in the modem, Linux only uses 2, and Windows uses 80. My guess is that the modem uses sessions to control the bandwidth, but I don't know how to add sessions to Linux networking to compete for bandwidth. I did test in the same browser.
View 4 Replies
ADVERTISEMENT
Jul 8, 2010
I upgraded to 10.04 from 9.10.
Network accesses are now dramatically slower.
I upgraded a copy of my previous 9.10 installation so I can still use 9.10.
Network does work with 10.04 but is extremely slow. Website loading is initially quite fast but then slows to a crawl. Second and third tabs appear to stall completely, waiting for the first tab to finish.
All of this works just fine under 9.04.
Toshiba M45-S165
1.5 GB RAM
View 1 Replies
View Related
Apr 4, 2010
I need to run VirtualBox on my desktop to run a WinXP partition. I set it up and loaded it fine. Now, Windows slows down to an absolute crawl. It doesn't seem to be using a huge amount of memory in the Task Mangler.
The computer itself isn't being bogged down. I can tell that because I go back to the Linux side of things and it's running fine.
I'm left to question if my settings are correct. Can someone help me review things?
I'm using Ubuntu 7 on that machine. It's WinXP Pro that I'm loading on there.
View 9 Replies
View Related
May 27, 2010
I have a newly installed Dell Optiplex 755 with Ubuntu 10.04 (64-bit) and I am having serious issues with network copying. Whenever I start rsync och scp with larger amounts of data my system becomes practically unresponsive (all types of apps grey out) until those processes are completed. Cpu stays at below 10% and I have lots of free memory and such .
View 3 Replies
View Related
Aug 21, 2010
I'm using OpenVPN to connect to a remote system. When I run
Code:
It brings up a new tunnel interface. The problem is that once the tun interface is brought up and the VPN is established, my whole Internet connection slows to a crawl.
Here is the output from ip route show before openvpn:
Code:
And after openvpn:
Code:
View 2 Replies
View Related
May 31, 2011
I have Ubuntu 10.10 running on a Dell Latitude E6500 notebook and am using the Broadcom STA wireless driver (just in passing, same happens on Mint 10).
My problem is this:
- when the computer is plugged into a power outlet, wireless works fine, but
- when the computer is running on battery, it hardly works at all: The network strength indicator item still shows the same connection strength but data are not transmitted anymore or only extremely slowly (google.com might 2 minutes to load).
The drop in performance literally happens 1 sec after unplugging it, and once the notebook is plugged into external power again, it resumes after a few seconds. (I have tested this with big downloads where you can see Firefox's or the Update Manager's download speeds.) The BIOS doesn't seem to have power saving settings that make that happen, and I haven't found any in Ubuntu.
View 1 Replies
View Related
Feb 3, 2010
I am programmatically doing a large FTP upload (about 5 Gb's of 2-3 Mb files) from my Windows 7 machine to a ProFTPd server on my Ubuntu box. When the program is run, transfer rates are huge! but as run time continues, transfer rates drop off significantly and eventually slow to a halt resulting in a:
Quote:
Read Timed Out
error.
The rest of the uploads fail due to Socket Read Errors.
Why is the transfer failing like this?
View 2 Replies
View Related
May 9, 2011
I'm having a weird problem that I'm hoping someone can help me with.
First some specs:
F13
NetworkManager Applet 0.8.3.998
Driver r8169
Opera 11 and Firefox 3.6.16
Recently my ISP switched to PPPoEand since then my internet connection has been giving me problems. While browsing, some websites load fine, some websites load fine after I refresh once or twice, some load really slowly and the formatting tends to be messed up and some websites won't load at all (they stop at waiting for website...). Ping for all of these sites is however fine. Also uploading and downloading either from sites like rapidshare or using torrents is also fine. The same ISP also provides a second similar connection which is connected through a wireless router (mine is connected directly - no modem or router) to two computers (one via a wired connection and one through wireless) both running Win 7 and everything works fine over there.
Things I've tried. I tried using the router changing it's setting to my connection and connecting through that but the problem remains. After googling I thought it might be an MTU issue so tried this:
[Code]...
View 5 Replies
View Related
May 7, 2011
First some specs:
F13
NetworkManager Applet 0.8.3.998
Driver r8169
Opera 11 and Firefox 3.6.16
Recently my ISP switched to PPPoEand since then my internet connection has been giving me problems. While browsing, some websites load fine, some websites load fine after I refresh once or twice, some load really slowly and the formatting tends to be messed up and some websites won't load at all (they stop at waiting for website...). Ping for all of these sites is however fine. Also uploading and downloading either from sites like rapidshare or using torrents is also fine. The same ISP also provides a second similar connection which is connected through a wireless router to two computers (one via a wired connection and one through wireless) both running Win 7 and everything works fine over there.
Things I've tried.
I tried using the router changing it's setting to my connection and connecting through that but the problem remains. After googling I thought it might be an MTU issue so tried this:
ping -M do -c 3 -s 1464 www.myce.com and got
PING myce.com (212.204.237.148) 1464(1492) bytes of data.
1472 bytes from www.myce.com (212.204.237.148): icmp_seq=1 ttl=47 time=129 ms
1472 bytes from www.myce.com (212.204.237.148): icmp_seq=2 ttl=47 time=129 ms
1472 bytes from www.myce.com (212.204.237.148): icmp_seq=3 ttl=47 time=130 ms
--- myce.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2133ms
rtt min/avg/max/mdev = 129.261/129.683/130.044/0.436 ms
This works for various websites whether they load or not. My MTU is set at 1492 but I've tried various lower numbers all the way down to 1300 but no luck. I tried disabling ipv6 in Firefox but no change.
View 2 Replies
View Related
Dec 22, 2010
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies
View Related
Mar 2, 2010
I have 2 ubuntu servers, one is running 9.04 and the other has been upgraded to 9.10 but the 9.10 server no longer browses or connects to the windows network, but the 9.04 server sees the windows network fine. I have checked the smb.conf file against the 9.04 server which has the same configuration as the 9.10 server. It's strange that the 9.04 version server is working perfectly and the latest version 9.10 is not.
View 4 Replies
View Related
Sep 25, 2010
i am still using windows in my other pc. and want to try this out. but this is my problem for now.
Cant see/connect to other pc[windows]. i do have files in there that i want to put in this pc currently installed by xubuntu.
How do i connect this 2 pcs 1[window] and the other 1[xubuntu]
by the way [URL] i read this thread before i make this post. i did try but still no effect. maybe there is some thing wrong with the codes, i cant understand some of its steps..
View 1 Replies
View Related
Mar 3, 2009
whenever I try and acces my windows network it just says "Failed To Receive Share List From Server"It has previously worked fine in ubuntu and suse. Anyway I can get this to work?
View 2 Replies
View Related
Jan 8, 2011
I use Fedora 14. When i try to acces on windows network i get this error :Unable to mount locationFailed to retrieve share list from server.
View 3 Replies
View Related
Jul 11, 2011
how to set up my laptop with Fedora 15 so I can see my other Windows computer on the network so I can access the files on it? I'm still new to Fedora so the more detailed the better it is for me.
View 14 Replies
View Related
Aug 31, 2011
I followed this article How To Network openSUSE 11.4 And Windows to network wired (ethernet) windows xp and wireless opensuse 11.4 and everything is working great. i can see windows from opensuse and opensuse from windows but have a few questions.
First, when i got to the section to Open firefox or Konqueror and in the address bar type localhost:901 and press the Enter key in articles photo it shows i should have, home-globals-shares-printers-wizard-status-view but i only have home-status-view-password in my firefox when i typed localhost:901, is that all i should have?
View 9 Replies
View Related
Mar 2, 2010
Ubuntu 9.10 now, before 9.04 was installed. On both versions I was unable to browse windows network - when I visit corresponding icon in nautilus, I see error message:
??????-???? -- ???????????? ??????.png
Looks like some service was missed at startup and not running.
View 5 Replies
View Related
Mar 8, 2010
I'm trying to get my computer connected to the internet at work. how to set up a connect in ubuntu or any other Linux system. So I'm completely on my own. I went into windows to get my IP address, subnet Mask, gateway address, and DNS server. I put these in using sys>admin>network>wired connect | dns. Nothing works. I went to Network Tools and tried to ping the dns server and another address given from the Ubuntu help menu. Nothing. In network tools, I see two options under devices, loopback interface and ethernet (eth0). I can't do anything with loopback and it has the standard 127.0.0.1 255.0.0.0 showing (shadowed). So i skipped that and then clicked on the ethernet option and the "configure" button becomes active. The ip and such that I put in seem to be showing there, but when I click on "configure" I get something like "The interface doesn't exist". the network proxy setting is "direct internet connection". Seems that since I can connect when in Windows, I ought to just be able to get all the information I need and set it all up in Ubuntu. Maybe I don't have enough info from Windows, and maybe I'm not putting things in the right places in Ubuntu.
View 6 Replies
View Related
Apr 24, 2011
I wonder if someone could please direct me to a really simple guide to adding a Linux Mint 10 PC to a Windows XP home network that gives clear instructions for the actions to be carried out in both Linux and Windows XP? The Linux box is connected to the router by ethernet cable. I have tried the Samba Setup Guide [URL] but it ends cryptically with "Now you need to setup your Windows PC for domain logins" and none of the IT folk I have asked at work know what that means.
View 6 Replies
View Related
May 7, 2010
Trying to network three computers using dhcp.
Box 1: older Asus A7N8X-E deluxe w/onboard ethernet using dhcp
Box 2: new Asus M4A785-M Micro ATX w/onboard gigabit ethernet using dhcp
Laptop: Dell Studio 1745 w/Intel 5100 a/b/g wireless
Router: Linksys WRT54G set as dhcp server
Both windows boxes are set for workgroup "home"Laptop is "laptop.home"They can all connect outside to the internet but don't seem able to see each other, not even to ping each other.
View 13 Replies
View Related
Nov 18, 2010
I have in fact set the folder to shared.I can see my computer or "server" on the windows network.My router is all that ties my network together.And I have a criminal history...okay that last one was a lie.But really I'm stuck here I can't figure out how to let the windows network see my shared folder.
View 3 Replies
View Related
Feb 14, 2010
I have a network of 5 Windows Machines and 1 Linux Server. I created a Filemaker Pro Database on a windows machine and share it with the other machines through web publishing (only locally). - On any Internet browser, they only have to go the IP of the computer hosting the database - http://192.168.1.99:120 to enter & use the database, and all the other windows machines connect perfectly.
However, when I type the same IP(+port No.) into Firefox on my Linux computer, it can't reach the windows computer with the database (It just times out). Is there a firewall preventing it from connecting to other computers on the network, or do I need to update firefox or run another Internet browser or install Samba? I don't have much experience with Linux, as a programmer set the server up for me, so a simple solution with as little programming as possible would be fantastic.
View 6 Replies
View Related
Jan 27, 2010
I have installed Samba on my one of my computers that has Fedora 12 installed 192.168.1.2, and the other PC that has Windows Vista installed 192.168.1.3 Hostname Adam-PC Network: WORKGROUP. Both PCs are connected to Wireless Netgear Router with DHCP enabled on the router as well as the two computers. How do I set up File sharing on these two systems?
View 2 Replies
View Related
Sep 1, 2011
I am trying to both access files shared by Windows machines on my network, and I also want to share files on my Fedora 15 box. In Nautilus, if I choose the 'Browse Network' option on the left toolbar, I am shown a Windows Network icon. If I try to double click this, I am given an "Unable to mount location" error. Does anyone know why this is and how to fix it? Further, where is the GNOME 3 option to right click and choose to share a folder? Both KDE 4.5/4.6 and older versions of GNOME (at least on Ubuntu) had this. Is there a way to share files this way, and if not, is there some workaround?
View 2 Replies
View Related
Feb 13, 2010
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies
View Related
Mar 26, 2010
So, I'm trying to set up a network with my windows netbook so the Ubuntu comp can access the internet through the netbook's wireless. Finally got the network set up, but can't access the internet on the Ubuntu comp. Also, the Ubuntu machine can recognize and access the files on the netbook, but the netbook only sees a computer named Owner-a6012abd6 which asks for a password.
The netbook is running Windows XP SP3, with an Atheros AR9285 Wireless Network adapter(internet) and an Atheros AR8132 PCI-E Fast Ethernet Controller. The Ubuntu comp is running Ubuntu 9.04.
View 1 Replies
View Related
May 29, 2010
I have just installed Ubuntu 10.4 LTS and would like to share this computer on my windows network. I understand that Samba is the way to go, but how do I configure linux with Samba so I can share files and printers? I am able to see my windows computers (vista and xp) but I am not able to see the linux computer with those machines plus I would like to change the network name of the linux machine if possible. Please any help and information will be much appreciated. Eventually I would like to server a printer from this linux machine to the other windows machines.
View 6 Replies
View Related
Jul 4, 2010
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
View 3 Replies
View Related
Jul 10, 2010
I am trying to configure MPD (music player daemon) to work on my headless ubuntu server. Everything works well, but MPD cannot see the music files stored on my windows XP main computer. These files are stored at smb://LASTNAME/share/music Is there a way to directly mount this drive, so it is accessible at something like /mnt/music, in order that they work with MPD?
View 8 Replies
View Related
Jul 20, 2010
I have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies
View Related
