I am trying to copy some M$ created files from and to a webdavs system. Files with the type: "unknown", will not copy. I get the following error message: File or folder webdavs: ... does not exist. Do I need to define each of the file types in some way? Is there a way to get that to work without having to define all the "unknown" types? I'm using:
KDE
Dolphin/Konqueror/cadaver (all fail)
just installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
View 1 Replies View RelatedAfter latest samba updates from updates-testing (F11) I can't copy any file from the network via samba: when copy process reaches almost end of the file, error message appears 'Invalid argument'. Such error happens with any read attempt on a network file - the last ~5% of a file can not be read.
View 1 Replies View RelatedI have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
how to mount a drive and do copy files from ipaddress1 to ipaddress2
View 5 Replies View RelatedI recently got my D-Link DWA-556 pci card working with my new desktop with Ubuntu 10.04 64-bit. Connection speed is good, but local network file transfer speeds are pitiful. I'm trying to copy some files from my laptop(also running 10.04) and I'm getting around 300-500 kb/s, which is actually lower than my typical download speeds. Anyone know what the problem might be? output of iwconfig is this:
Code:
wlan0 IEEE 802.11bgn ESSID:"linksys"
Mode:Managed Frequency:2.412 GHz Access Point: 00:1D:7E:59:04:0E
[code]....
I have just rewired my LAN using Cat 6 cables. Download- and Upload speeds to my main machine are great :However, it seems my LAN speed is very slow. when I copy large files from my main desktop pc to my mediaplayer, I only reach a speed of 3,7 MB/s in Ubuntu 10.10 using SMB protocol to connect to mediaplayer. I use a Sitecom WL351 Router that works fine as far as I can see. Using my dualboot Windows 7 I can copy the same large files using same setup (same pc to same mediaplayer) I can copy with almost 10 MB/s. I appreciate a little protocol overhead in Ubuntu, but this seems to be a little too much
View 1 Replies View RelatedWhen i try to copy files from my samba server (Ubuntu 9.10) to my windows seven media center, the speed is extremely slow. So slow that is better to download 100mb file from the internet, than from my lan. And on my lan, every card and switch is at 1000 mbps speeds on cat5 cables. And from XP or other linux machine
View 1 Replies View RelatedHow can you create a script to move or copy files from a main directory into multiple directories below the main directory.
View 7 Replies View RelatedIs there a method at the command line to copy files from one location to another and retain the source files group and user?I'm migrating some MySQL files from one machine to another.I want to back-up the original files in the directory presently. They have owner:group of mysql, some have owner:group root:mysql and so on. To copy them under cli or Nautilus everything changes to root for I execute sudo cp or gksudo nautilus and copy via gui.
Since it is MySQL data I could simply do a dump of the database and restore it on the other machine. But there's about 20 db's and I want to do this via a copy for it will be faster - at least that is what I think.
When i installed ubuntu. I made a seperate partition so that i could copy an ISO image onto it of an up-to-date version of ubuntu. I wanted to then boot the ISO up so i could install the version that way.I've already tried doing it through the update manager but it'll download, almost be done with installing and it freezes on me. so i figured this would be easier. However i do not know how to gain access to the other partition to copy the ISO image.
View 6 Replies View RelatedI have many files and folders in my source folder. I want to copy some files and folders from that source folder to destination folder. What should be require to given with the "cp" command?
View 1 Replies View RelatedI am upgrading a QNAP NAS - the unit only had 1 drive to begin with. I have taken this original drive out and hooked it to my ubuntu system and when I boot my machine ubuntu sees the volume that was the volume the qnap shared. and it sees MOST of the files. but when I go to copy stuff it gives errors stating things like 'can't copy data2.cab' - when I go the directory where it claims it can't copy data2.cab there is no data2.cab.
Thing is I am pretty sure there *IS* a data2.cab ... just that the rights or something are such that I cannot see / copy it. is there a simple command I can run on the *entire* drive that will set the ownership of ALL files so that I can see and move them? I just need to copy all these files over to the upgraded nas and then I can reformat this drive.
I just installed Ubuntu 10.04. I have successfully installed Apache2, PHP5, and MySQL. I cannot copy files or directories into /var/www.
how I can enable copying of files and directories into /var/www?
i have a macbook that wont boot. i want to copy the picture and music from the hd. i took the hd out and put it into my dell inspiron. i booted up with a live cd and im able to view the files. i can play the music. i just cant copy anything to my external hd. its telling me i dont have premissions. i tried to change that in the properties but it wont let me.
View 4 Replies View Relatedthe problem is that when i try to copy two files with the name(say ajax.js and Ajax.js) to a pen drive/USB it shows the options for either Replace/Skip. with the above two options either one of the ajax.js files will be copied, but i need these two files. I have also used different USB's, but no difference...
View 9 Replies View RelatedI have a folder that contains multiple files i want to copy.
file1_DK, file2_DK, file3_DK, file4_NO
If i wanted to copy files1-3_DK but exclude file4_NO how would i do that?
I'm trying to copy some files to a dvd. and i was wondering is the tar command the correct command or is there a better way.
View 1 Replies View RelatedI am trying to copy content of single folder to multiple destination simultaneously using tar and FIFO. here is the source code
mkfifo bin1.fifo
tar -C bin -cf - . | tee bin1.fifo | tar -C bin2 -xf - &
tar -C bin1 -xf bin1.fifo
[code]....
alright im curious if I can copy a file over ssh,, im not sure exactly how to go about this, if memory serves there is a scp command ?? can someone give me a walk through,, or if im wrong set me up with the code to copy a file over ssh
View 5 Replies View RelatedI'm a newbe with linux, thought it's a great OS but I'm nearly giving up. Nothing works like it should, to copy stupid files across you have to be some kind of wizz to do it.
I installed fresh copy of fedora 13, created folder on the desktop and connected via usb external hd.
Now, there is no way of coping files from my desktop to the USB drive as i get"error while coping to USB-Storage" The destination is read-only. Permissions - sure but there is nothing there sa tehy could not be determined.
Anyway, hoping someone can give me a light from the dark tunnel, so i don't have to go back to windows..
How can I copy ext4 files to a Mac using a USB HD?
View 2 Replies View RelatedI'm trying to copy files to the /var/www folder on Ubuntu 10.04. But I think I don't hava the permission. How can I do this? Maybe I have to set the rights permissions.
View 3 Replies View RelatedPossible Duplicate: Linux equivalent to robocopy? I have two websites - one is basically a development version and the other is a production version of the same site. So I'd like to be able to merge the changes made to the development site based on the modified date of the files. Is this possible with the 'cp' command?
View 2 Replies View RelatedWhen I use ldd it prints the location of the depends.Is there a way to copy the depends listed to a location in a single command or streamline it? I don't want to copy each dependence once at a time.
View 1 Replies View RelatedWhy can I not drag and drop files to the new volume in dolphin? I tried doing it as root and it basically told me the same thing, that I cannot write in this volume...
View 8 Replies View RelatedWhile copying big folders in ubuntu using cp command,it takes a long time to copy in which no status comes on the console while copying.Is there any way to see the status of copying big file while the system is copying the files?
View 2 Replies View RelatedI have a Emerson MP3 player its a real cheap piece of garbage but I got it for free so whatever. I want to use it for audio books. when I plug it in and try to copy files to it it says I dont have permission its read only access. Trying to change the permissions does not work no matter what I try. I ended up finding out it is formatted as a msdos partition, which from what I read at another web site may be fat16. Dont know for sure about that though, just know it says msdos partition type. how I can change permissions to this so I can put my audio files on it?
View 9 Replies View RelatedI have the following problemI want to copy files to a usb at random?My_mp3_400GB to my_usb_32GBjijiji is enough?But I have little idea how to do it on command, I want to copy files to a usb at random?cp My_mp3_400GB/ /my_usb_32GB????
View 2 Replies View RelatedMy computer doesn't like to copy files over 4 gigs to a flash drive. It will copy for about 12 minutes, and then when it's almost done, it's says "File to large." Is there some sort of limitation in the software that can be adjusted for this.
View 8 Replies View Related