Networking :: Share Bandwidth Of Two ISPs For Local Client With Server?
Jun 28, 2011
I have a UBUNTU server 10.04 LTS with 3 network interfaces (eth0,1,2) which eth0 is connected to my lan and others connected to two different ISPs , I would like to know is there any way to share bandwidth of this two ISP for my LAN , I mean for example if eth1 has X MB bandwidth and eth2 has Y MB bandwidth my clients those who use download manager for downloading file from internet has X+Y MB download and upload bandwidth.I do not want just limiting each user or service to use one of those interfaces I want to share them for all to increasing my internet bandwidth
View 4 Replies
ADVERTISEMENT
Apr 15, 2010
I have been using Ubuntu sense about 6.10 and never had to network with a Windows computer before. I have a decent understanding of Linux itself but I am having issues with this samba client. I have a clean install of Ubuntu 9.10 and am trying to use samba to access my shares on a Windows XP(SP3) computer. I am on the network just fine, and all the computers on the network have static IP addresses. When I go to Places->Network->Windows Network I see the "TITANNET" workgroup, (Even before I changed my workgroup to "TITANNET" in the smb.conf file.), but when I try to access it I get this error:
Code:
Unable to mount location
Failed to retrieve share list from server.
P.S.[0] I tried using /etc/init.d/samba restart but it did not work, I am not sure I am even running the samba server. (Well, it is obvious I am not, what I really mean is what am I running to (not =D)access the shares on my Windows PC.)
P.S.[1] I know that this has probably been posted before. I have searched and searched, I am about 1.5 pots of coffee and 4 hours into this.
View 2 Replies
View Related
Nov 26, 2010
Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...
I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,
In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...
My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux)..
1:whether it is possible to get the available bandwidth run application in client side only?.if possible. how i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?...
I dont want to test the speedtest.in (in GUI )
View 1 Replies
View Related
Mar 17, 2010
I have a Linux host connected via LAN to Internet. No proxy or squid is used on the host and outgoing traffic to Internet is not limited. I have several local users on this box. Recently bandwidth statistics on the switch/router showed increase in the Internet traffic from this host. How do I monitor the traffic utilization per local user on Linux host? I want to be able to monitor the amount of traffic per port and per user, like user alice downloaded 20GB today via port 22, and so on. Do not offer to use Squid, this is not just web traffic I want to monirot but all amount of incoming/outgoing traffic per user per port.
View 3 Replies
View Related
Nov 26, 2010
Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux).. 1:whether it is possible to get the available bandwidth run application in client side only?.if possiblehow i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?
View 2 Replies
View Related
Oct 25, 2010
I have a router having four ethernet ports and bandwidth of this router is 500kbps. Suppose one user used one Ethernet ports only rest of Ethernet ports are free, that user should get 500Kbps. If I Add one or more user to any of the Remaining Ethernet ports how can i equally share a bandwidth among those two users ,it means each user should get 250kbps.
View 1 Replies
View Related
Mar 6, 2010
I'm having problems with squid, and i don't know how to solve them because I'm new to linux. a. Why squid in my computer often does not work? The process has already started (using the command sudo squid start), but the Internet on client computers can not connect. This can be be resolved if the proxy server computer is restarted. Anybody know why is this happen?
b. How do I set the client bandwidth limitation using squid? I want the client computers can only use maximum 60-70 KB / s. Do I need another additional software package?
View 1 Replies
View Related
Mar 11, 2010
is there any tools that I can use to get bandwidth speed info between OpenVPN AS and its client?
View 3 Replies
View Related
May 18, 2010
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies
View Related
Jan 18, 2010
How to share bandwidth by means of commands in Ubuntu Linux?
View 3 Replies
View Related
May 16, 2011
I have an Ubuntu box, and there are two another PCs with Windows XP at my home.There is a TP-Link WR340GD wireless broadband router, and a Motorola SB5101E cable modem. Maximum download speed of the Internet connection is about 6 Mbit/sec.While I'm starting some download processes on the Ubuntu box, the other two PCs get only small bandwidth according to their users, although download speed on my computer does not often exceed its maximum.
More precisely: I usually download files at approx. 1 Mbit. The other users complain about that I slow down the Internet connection at their computers, and tell me to stop using the Internet.Is it possible to improve the usage of internet bandwidth, and share the connection fairly between computers
View 1 Replies
View Related
Jul 11, 2010
Want to share windows partitions (FAT) mounted on an Ubuntu server from an Ubuntu client, over a wireless connection in a small home network. Succeeded mounting linux ahares from client but not the windows shares (I get what sounds like permissions errors). All shares are served by Samba, all have user accounts and passwords. smbclient and smbmount have been used on the client to attempt to mount the shares. Both machines are dual boot, and I'm able to share and print over the network with XP running on both machines.
OS: both machines: Lucid Lynx
Client: Dell Inspiron 1520 laptop
Server: a Medion (german company) cheapo desktop.
View 1 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Apr 5, 2010
PC :Personal Computer
ISP : Internet Service Provider, which gives the IP Address to the PC under him.
Suppose I have PC-A running under ISP-A and another PC-B running under ISP-B. Both PCs A, B are running in different cities. Now Im running an application on PC-B which listens for the messages that should be processed and PC-A want to send to messages to the application listening on PC-B. For this situation how does PC-A does connect to PC-B i.e. what is the IP Address of the PC-A to get connected. Do I need to give IP of the ISP-B.
View 1 Replies
View Related
May 26, 2010
it is possible to have the following network configuration: a central location called A with an ISP and two more locations (let's call them B and C) with diferent ISPs and to have a vpn connection between A and B and A and C? More exactly I have a central location with a CentOS 5.3 running as a gateway and I want to know if it's possible to have a computer from the location B and C connected to A through a VPN connection. I don't want computer from B to see the computer from C, is not necessary. What kind of equipment do I have to put in places? Routers? Managed switches? As a start I think that it have to work with a router in location B and one in location C and in location A I think that a managed switch that can manage vpns it will be ok.
View 3 Replies
View Related
Mar 3, 2010
I have configured samba in linux .i can share file from windows client. we are not using any domain or ldap. using workgroup only. kindly let me know is it possible to change the smbpassword from client.
View 1 Replies
View Related
Jul 20, 2010
I have about 50 servers with at least 200 GB free on each host. I need close to 10 TB of continuous shared storage between almost half of the servers for a new app I building.
I was looking into buying a storage device but was wonder if I could get any use out of the free space on all the servers, grouping all of the free storage from the hosts into one reduduant storage array.
View 1 Replies
View Related
Nov 21, 2010
I have my local computer, and server.
I log into server, and mount my local computer (folder) via sshfs.
Create .rar backup archive direct to sshfs remote folder.
After copy, close my ssh sessions.
And use my streamer to backup files stored by server.
I'm wondering, is there any way to share streamer /dev/st0 via ssh session ?
how can i start backup direct to (remote) -> root@server/dev/st0
View 2 Replies
View Related
Sep 22, 2010
I have a fast computer in my office and I want the person using the slow computer in the same office to boot up and see the login window (gdm) and log-in from there into the fast computer and be able to use their session on the fast computer the same time I am locally logged in to the fast computer as a different user and session.Is this best done through XDMCP? Where is a good tutorial on how to set this up?
View 9 Replies
View Related
Feb 28, 2010
I have a computer that's booting Ubuntu 9.10 from the first of 4 drives. The other 3 drives are formatted as NTFS. Is it possible for my 9.10 to share the NTFS drives to the network so my other network users can access my NTFS drives while I'm booted to 9.10?
View 2 Replies
View Related
Feb 8, 2011
last friday my schools isp enabled iwsva - interscan web security virtual appliance from trendmicro. all traffic is now filtered, and slowed down. videos and other videostreams are now useless. after this we have had serious problems using our netbooks with ubuntu, and upgrading workstations with ubuntu has become very problematic, or almost impossible. i have to run the update process 6-8 times before all packages are updated.
what can i do to document the problem in a good way. the isp tells me that there are no problems, and that it has to be a linux problem. (ever heard that one before?) the ltsp-clients on my debian servers does not have the same problems, maybe because they are using the proxy on this server?
View 5 Replies
View Related
Mar 3, 2011
i have configured the squid for my lan. My lan has three redhat 5.3 web servers. Now by using proxy server, i wish to give access to external clients for my web server and restrict to local client, accessing wan through port 80
View 2 Replies
View Related
Nov 18, 2010
I created a the class like this for shaping the packets with a specified bandwidth rate.....
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 15
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 750kbit ceil 750kbit
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 600kbit ceil 750kbit prio 0
For Our Requirement:-
I dont want to specify the bandwidth rate strictly like this rate750kbit ceil 750kbit,based on whatever speed is coming which should allocate the bandwidth rate for particular class...I need one application for finding the upcoming bandwidth & Is any other method is there for specify the bandwidth rate in a classes.
View 1 Replies
View Related
Nov 19, 2008
OS:
Red Hat ES 5.2
Kernel:
2.6.18-92.1.18.el5
Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global]
# Server name
server string = Intranet Server (Primary)
# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name.
workgroup = intranet
# Security mode. (See SAMBA documentation for details.)
; security = user
# Restrict conections to specific IP addresses.
hosts allow = all
# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10
# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody
[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet
/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.
Has anyone come across this problem in the past?
View 3 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
Mar 12, 2010
I would like to configure my system to do the following. Previous versions of ubuntu did some of this but now I cant seem to get this working.
1.Browse other Ubuntu systems on the local network by default. Avahi is install on my systems but they cant see each other.
2.From the GDM screen log into another PC. I had this set up in the past so from my laptop I could log into my server almost like terminal services. How do I set this up again?
3.Share files on the local network easily. How do share file with other pc on the network if I don�t want to use samba? What happen to NFS in Ubuntu?
View 1 Replies
View Related
Sep 27, 2010
What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies
View Related
Feb 1, 2010
I have been trying off and on for weeks to share my Internet connection with a Windows XP client (netbook). While I can ping back and forth between the two machines, in the form of a ping test, I can't get to the Internet from the client, no matter what I try.
My Ubuntu 9.10 desktop (host) has two NICs, eth0 and eth1. eth0 connects to the Internet. eth1 goes to the Windows XP client. Regardless of whether I use an Ethernet crossover cable or a standard cable, I can get the two machines to talk to each other, but no further.
Things I already tried:
-Tried setting eth1 to "shared" mode in NetworkManager on the host. I set the Win XP machine to automatically acquire an address & DNS. Didn't work.
-Manually configured the IP settings on both machines, like this:
client:
address 10.0.0.2
subnetmask 255.255.255.0
gateway 10.0.0.1
[Code]....
Despite all of the above, I still cannot share the host's Internet connection with the client. I don't understand where the client's traffic is going, and why I can't share the connection. As far as I know, I am not doing any sort of firewalling or blocking on the host, so there is no obvious reason that the client's traffic simply disappears. I just know that whenever I open a Web browser on the client, all I ever get is error messages.
I have had no issues setting up a shared connection when the host runs Windows XP, so I am pretty sure there is no broken hardware causing the problem. Why can't I share the connection under Ubuntu?
View 1 Replies
View Related
Feb 15, 2010
I just set up an ubuntu 9.10 server (no desktop environment, command line only) and I'm unable to see my samba share. I followed these instructions. Here are the relevant parts of my smb.conf file: Quote:
workgroup = JASONGROUP
# I un-commented this
security = user
[code]....
View 9 Replies
View Related
Mar 10, 2011
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies
View Related
