Networking :: Networking Is Not Getting Out Of The Dosbox Instance \ Needs To Have Some Config In Place To Link Networking Over To Dosbox?
Jan 31, 2011
I am attempting to setup and old BBSinside of DosBOXI've built one of the DosBOX Megabuilds, with the NE2000 patch.It uses libpcap in order to piggy back on top of the system's NIC. All of the dosbox side appears to be working.My system comes up, gets the MAC address i told it to use, i can load a packet driver in dosbox, all of that seems well and good. The issue, i think, is on the linux side. It's built on a Fedora 14 box. I'm getting the feeling that networking isnt getting out of the dosbox instance. Does it seem possible that fedora needs to have some config in place to link networking over to dosbox?
View 7 Replies
ADVERTISEMENT
Feb 6, 2010
when i was about to install turbo c using dosbox in ubuntu on the console i typed the commandas sudo apt-get install dosbox the error occured as E:couldnt find the package dosbox
View 5 Replies
View Related
Mar 17, 2010
I have the C drive were dosbox is mounted. I have 3 hard drives, C, D, and E. D I use for storage and quick refrence, E hd has all my games on it. I have figured out how to mount the 2nd hard drive. But dosbox doesn't recognize any directory other then the directory that dosbox is in.
View 8 Replies
View Related
May 8, 2011
Trying to compile DOSbox version 0.70. Apparently this is the only version that can run Privateer flawlessly.Problem is, when I extract the source and try to './configure', I get an error that SDL 1.2 is not installed.
Code:
anthony@anthony-1010:~/Games/DOS/dosbox-0.70$ ./configure
checking build system type... i686-pc-linux-gnu
[code]....
View 1 Replies
View Related
Aug 4, 2011
I have the current version of dosbox installed, and I'd like to install version .73 as well and have both installed simultaneously.Is this possible and how can I do this?
View 1 Replies
View Related
Jun 13, 2011
how do I create a launcher for an application using DosBox? I tried in Alacarte, but it does not show up. I did this both as root and as user.Disregard. It did create the launchers. It just put them in "Other" even though I told it to create them in "Internet" so they are there, but just not where I want them. That is okay since now I can add them to my favorites and put them in the order I want.
I guess I will like Gnome 3 better as I find tweaks to make it work like I want it to work. Still though, it is not nearly as user friendly as my heavily tweaked Gnome 2 with Compiz.Another question though: How do I get it to select and use a photo I want for the background instead of the stock images? It is annoying as all get-out to have the screen turn to grey rather than stay the way I want it. :
View 5 Replies
View Related
May 25, 2011
I have debian 5 installed on a laptop. I am trying to install maxthink on this computer (according to some people here it is the best software after slackware )I tried to install maxthink on wine (debian default) it complains about some version conflicts and finally gives an error'c:windowssystem32Tlist7.ocx' not being registered. tried dosbox.With dosbox while running the application it tells me that'this program cannot be run in dos mode'.After about a week of tweaking things I still have no solution
View 3 Replies
View Related
Jul 31, 2010
i'm running slackware 13.0. i've installed dosbox package and the installation process showed no errors,but now i cant find how to run dosbox in any of the menus or from terminal.
View 2 Replies
View Related
Mar 4, 2011
I am trying to mount dosbox on a share on a remote computer. I did it in Win XP without any troubles. In Ubuntu it does n't work.
First I made the map in media and connected the share. The share works fine, but I cann't mount DOSBOX. Then I put the share in the /home/user directory. Share works fine! But dosbox does not mount.
On mount c /home/user/mydrive
I get: Drive C does not exist.
I think that the permissions are not correct.
View 3 Replies
View Related
Jan 10, 2010
I am trying to run Dosbox on 9.10, and both the Software Centre isntallation, aswell as DBGL's included version of Dosbox load the splash screen, then promply quit. I have had success with previous ubuntu versions, and am wondering why I can't get any further on the new version?
View 4 Replies
View Related
Jun 4, 2010
I have mount the turboc in ubuntu ,as following..1)Make a new folder named c in home directory 2)Then i copy the turboc's folder in c folder (Home directory)3)Go to dosbox and typed followingsa) mount c c b)c: c)cd turboc d)tc4)Now the turboc startsBut when exit from the turboci have to again mount the turboc and have to followagain the above procedure. Can i mount the turboc permanantly throught dosbox, that means whenever i clicked dosbox,turboc starts automatically
View 3 Replies
View Related
Oct 11, 2010
Is there any way to make the screenshots dosbox takes a higher resolution than 320x200?
View 2 Replies
View Related
Jun 18, 2011
I'm currently running openSuSE 11.4 (kde v 4.6.4), and after unlocking the mouse cursor from the DOSBox (v 0.74) window, none of the Plasma Desktop Widgets or Components will register mouse clicks until I reboot.
Is there something config-wise I might change to prevent this from happening, or is there an otherwise quick way to restart only plasma using the terminal? Yakuake still drops down, and works, fortunately, so doing this is not a problem.
EDIT: Forgot to mention that all of said applications were installed from openSuSE repos using YaST2.
View 6 Replies
View Related
Mar 4, 2011
If I use Dosbox in full screen mode, and then exit back to KDE, my desktop icons get shuffled around.I'm using the desktop folder view in KDE 4.4.3I've noticed that this also happens with ScummVM as well, so I think it's more a KDE issue?
View 3 Replies
View Related
Aug 10, 2010
I have installed CentOs as server and trying to run .exe(dos program) there. i have already installed dosbox and works on running the program. But the problem is how can i run that on network (i use windowsXp)? i store the program and data on CentOs server and the client program runs directly on server (client just create shortcut to network path). I misassumed if we install dosbox on centos it can work, but it didnt for network
View 5 Replies
View Related
Jan 6, 2011
My Desktop is wired through eth0 to my wireless router. The router is connected to the internet. the ipaddress leased to my desktop was done with dhcpcd. My laptop is connnected to the wireless router through the wifi card known as device eth1 and i used dhcpcd for that also. How can I network my laptop via wifi through the router to the Desktop?
View 7 Replies
View Related
Apr 26, 2010
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
View 3 Replies
View Related
Dec 14, 2010
I've beeb setting up keepalived/haproxy as a load balancer for our site.
If you keep it down to two load balancing instances it works just fine. However, I was told to add a 3rd load balancer to the mix and that adds a new wrinkle. I need to add a new keepalived instance and I can't quite figure out how that's done.
It would seem to me to be an issue of the priorities as that is the only thing I altered in the files. Initially, nodes A and B were set to 101 and 100 respectively. I set node A to 102, node B to 101 and node C to 100... keepalived restarts and the virtual IP is pingable. But the website goes down!
SO then I tried Node A set to 101, node B to 100 and node C to 99. Same thing, I restated keepalived and the site goes down, tho the virtual IP remains pinagble and keepalived and haproxy are running.
here is a sample config file from my setup:
Code:
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
[Code].....
View 1 Replies
View Related
Mar 12, 2010
I have just installed slackware 13 on an old machine I am bringing back into use. As I have a spare Linksys wmp54g card I would like to try to get the wireless networking in place.From reading the forum the relevant advice seems to be fairly old (2004-2006). I wonder if anyone can advise me what the current steps would be?
View 3 Replies
View Related
May 19, 2011
when i first installed ubuntu on my asus eee netbook it would seem to scan and scan and scan for my local wifi network. i created a network foolishly thinking this would help. how do i remove it. my router is working fine. ipod touches and macbooks find the network no problem. my netbook randomly logs into this network or the proper network.
View 1 Replies
View Related
Jan 27, 2010
I would like to have ftp access the files on a Linux Server using XP. It's easy with a windows server but Microsoft doesn't work with the Linux server.
View 3 Replies
View Related
Apr 24, 2011
I'm having some trouble mounting a Samba share on my two Ubuntu machines. The Samba share is setup so that all files are readable and writable by everyone (it's only accessible via the local network). When I create a new folder on the share with either of my Ubuntu machines, the folder becomes non-writable by anyone ie. I can't place anything into the folder. I'm using the following command to mount the share:
[Code].....
I think the problem is with the way I'm mounting the share on my Ubuntu machines. If I go to the share using smb://192.168.1.160 in a file browser, I can create new folders which are readable and writable by everyone. But, if I create the new folder where it's mounted at /mnt/backup, no-one can modify or change it.
View 2 Replies
View Related
Nov 19, 2009
I want to know ; how to setting D-Link DWM 652 anybody can tell me how to do I have go back to windows again or I should stick to Fedora
View 2 Replies
View Related
May 22, 2011
I've just installed ubuntu 11.04 on my dell inspiron mini 10; dual-booting it with Windows 7.
I've looked at a couple of other threads about problems with the wireless card in the netbook and about problems with the wireless router. However, this problem doesn't seem to be the same; the netbook can see other wireless networks, just not mine, and other people seemed to be able to access their wireless network for a short period of time before they stopped being able to access it.
I can't see the wireless network on the D-link DIR-615 at all in ubuntu, though it still works in windows 7.
I've tried reinstalling the broadcom STA drivers as per this link and reinstalling but this hasn't made any difference.
What things should I consider trying in order to resolve this?
Ps. As a side note, my other ubuntu laptop (a toshiba equium A100) cannot see this network either, but has no problem connecting to other, although oddly it couldn't detect it in windows either before I put in a new harddrive and installed ubuntu on it.
View 9 Replies
View Related
Mar 25, 2009
I want to link two servers (nets) 192.168.1.x and 10.0.0.x which use Fedora with firewalls.
View 2 Replies
View Related
Sep 27, 2010
I have just built my self a new computer, since it will become a media center its not that powerful so i decided on using ubuntu instead of windows. Only one problem so far, my D-Link dwa-131 is not recognized and i can't connect to the internet except with a Ethernet cable. So how do i make my computer recognize the dwa-131?
View 1 Replies
View Related
Oct 26, 2010
I am on debian lenny and I am trying to make a script that will run in the background and checks the ethernet connection. If the ethernet connection goes down it will connect to wlan. I have found 2 ways of checking ethernet connection, via proc/net/dev and via ifconfig eth0. But if possible I want to avoid polling. So is there any event that is triggered when the table gets disconnect or at least the connection goes down and up?
View 1 Replies
View Related
May 11, 2011
I have just clean installed Ubuntu 11.04 on 3.06 GHz Dual core P4 with 2GB RAM
Code:
jim@venus:~$ uname -r
2.6.38-8-generic
At the same time I purchased a Gigabit NIC from D-Link, mostly because D-Link is a reputable brand and it said on the box compatible with 2.6.x linux kernal. The original NIC is still in the system and can be seen and is functioning as eth0. The system can see the new driver and the card, here is an extract from dmesg:
[ 1.401350] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.401390] r8169 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.401437] r8169 0000:02:02.0: (unregistered net_device): no PCI Express capability
[ 1.403219] r8169 0000:02:02.0: eth1: RTL8169sb/8110sb at 0xf8016c00, 5c:d9:98:45:8b:cc, XID 10000000 IRQ 18
and lspci:
02:02.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)
02:04.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
and ifconfig:
eth0 Link encap:Ethernet HWaddr 00:1e:58:9a:1b:0e
inet addr:192.168.11.65 Bcast:192.168.11.255 Mask:255.255.255.0
inet6 addr: fe80::21e:58ff:fe9a:1b0e/64 Scope:Link
[code]...
so as you can see dead as a door nail, no lights on the card and not picked up by the switch. How do I make this operate?
View 1 Replies
View Related
Mar 20, 2011
Currently, I am trying to use the Kdevelop4 in linux debian to make some debugging on a simple project. I added the <db.h> in the text editor and it is working. Unfortunately, when I am trying to build an "undefined reference to db_create error". So how to cope such error and where I have to add the searchable link libraries in Kdevelop4.
View 3 Replies
View Related
Mar 21, 2011
I'm setting up link aggregation. When I use two ports of the same nic everything is working fine. When I use two ports of different nics (broadcom and intel) it doesn't work. Does anyone know of limitations using two different nics for link aggregation?
View 3 Replies
View Related
