Networking :: Find I.p. Adderess And Username In LAN?
Jan 18, 2011i want to know method to find out i.p. adderess of host by username in LAN.i dont have root password.
View 3 Repliesi want to know method to find out i.p. adderess of host by username in LAN.i dont have root password.
View 3 RepliesI am using CentOS 4.8 I was doing some updates. Now I get "cannot find username for UID 500" here are some outputs,
repeater@irlp's password:
Last login: Sat Apr 2 09:16:27 2011 from 192.168.0.151
-bash: /etc/profile: Permission denied
[code]...
I installed lucid lynx about a month ago. with I installed filezilla and I have wordpress running on localhost.
When I do an automatic on wordpress it asks for ftp credentials. I don't my ftp credentials. I was not aware that I had ftp username and password. I am not sure if that means I installed the ftp server without knowing. my root password does not work on this.
I tried searching through wordpress forums but most of them show me how to set the ftp username and password in wp-config file so that it doesn't ask for it every time.
How can I find out the ftp username and password on my computer.
I have ldap authentication working and the machine is joined to the domain, but I have to append the domain name to my login every time I log in. example: user@domain.I've been unable to find away to log in without appending the domain name to the username. Any ideas on how I can force the machine to automatically append the name for me?
View 2 Replies View RelatedI have installed Fedora 14 and everything is ok but i cant figure out how to connect to the internet,everything seems working my wireless card is recognized and it finds networks but i dont know how to configure it.Im using wireless internet with authentication (username & password) but i cant find where to put username & pass.
View 10 Replies View RelatedI have a server x86 architecture and my problem is lost my username & password. Hope anyone can help about this matter as i need to log in to the server for maintenance purpose.
View 1 Replies View RelatedI'm trying to add a gmail contact in Pidgin. I have already added gmail as an account (I assume correctly).When adding a buddy it is asking for "buddy's username". What is that, their gmail.com email address?
View 1 Replies View RelatedI have an ubuntu 8.04 running samba that's integrated with active directory but not using winbind. Things are working fine except there are lot of entries in the samba logs about:
smbd/sesssetup.c:reply_spnego_kerberos(439)
Username CARBYkentoso$ is invalid on this system
CARBY is the domain name and kentoso is the computer name. I only see this error for the computers and not the users. Other than this, it's working fine. Is there a way to make this error go away? This is the smb.conf file:
[global]
workgroup = CARBY
realm = CARBY.LOC
server string = LION
security = ADS
map to guest = Bad User
obey pam restrictions = Yes
passdb backend = tdbsam
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:* %n
*passwordsupdatedssuccessfully* .
unix password sync = Yes
client NTLMv2 auth = Yes
client lanman auth = No
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
name resolve order = dns hosts lmhosts bcast
printcap name = /etc/printcap
disable spoolss = Yes
preferred master = No
local master = No
domain master = No
ldap ssl = no
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
invalid users = root, nobody
[printers]
LOCment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
[print$]
LOCment = Printer Drivers
path = /var/lib/samba/printers
[SHARE]
LOCment = Samba share
path = /share
valid users = @share
admin users = djoe
read only = No
i am after proxy server, i add the proxy server access username and password
[Code]....
it said the export is succecefully done, but after trying to install something using yum, its give me this [root@locVirtual-linuxtest etc]# yum install samba
[Code].....
I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedI'm on Debian Lenny. I've shared a folder on gnome GUI, then went to win 7. I see my machine, SERVDEB01. When I click on it, I get the login popup. The workgroup set in samba is FILE-SHARING, so I login with the following: FILE-SHARINGmyuser password and that's when I get the unknown username or bad password thing.
I had a look to /etc/samba/smb/conf security = user is uncommented the shared folder appears at the end of the config file In despair, I've also created an identical user on win 7 and the linux box. I've been into the security Local Policies of windows 7 set NTLM to LM and NTLM (instead of NTLMv2) Here's my smb.conf in case it's needed.
[Code]....
I recently installed vsftpd on my server. I noticed that users on the machine can login into vsftpd with their username and password on the machine and go to their root dir "/home/username".Now, I want to give some people a vsftpd username and password so they can upload and download files and folders to their folder, but this folder has to be in the "/var/www/(username)" folder. I don't want them to be able to go to any other folder than their own folder like "/var", "/etc" or "/home" etc. Also I don't want them to be able to login on the machine as a user, through putty for example. They should only be allowed to acces their folder with vsftpd, nothing else.
View 1 Replies View RelatedI'm using Ubuntu 9.04...How do i setup a broadband connection that DOES NOT require a username and password i tried pppoeconf but it wont let me proceed without entering something in the username and password fields. on XP i jus plug in my Ethernet cable and it works but it doest on ubuntu.
View 9 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
I have a 9.10 installation that I am unable to connect with SAMBA.
Attempts to access this (from Windows XP) give an error "the password or username is invalid".
I can see the computer, but not connect.
The Ubuntu installation is set up with the same user and password I normally use, and the files are setup the same way. I even copied smb.conf from another installation which works.
I set up SMB when prompted by shares-admin.
I have set up an ubuntu server running PPTP Server for VPN connections. I can successfully connect from a laptop within the LAN, but taking that same machine to an internet connection and trying to connect back in does not work. The only difference is that when I connect from within the network, I am obviously using the server's LAN (non-routable) address, and when I am connecting from outside the network (from Verizon Business DSL ), I am using the Comcast connection's static IP address.
I have a static IP address on a Comcast Business Class internet connection. Router is set to forward pptp and GRE ports.
Works:
VPN Server <- Laptop
iPhone -> Internet -> Router -> VPN Server
Does not work:
Laptop -> Internet -> Router -> VPN Server
Here is the weird thing. I have an iPhone that connects flawlessly every time through it's AT&T data connection. The laptop however, gets to "verifying username and password", and then returns error 619. It seems that there is an issue only when going through the router using the PPTP client built into MS windows.
I am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
I'm using old skool ftp from the terminal. I need to connect with a different user than my local linux user (which ftp defaults to). Can anyone tell me how to specify that from the prompt? Man page says...
Code:
user user-name [password] [account]
Identify yourself to the remote FTP server. If the password is not specified and the
[code]....
I went through System-Administration-Users & Groups to change my username. I changed my name and the name of my home folder to match. After restarting it to activate the changes, I get these messages when I try to log in: Could not update ICEauthority file /home/Moo/.ICEauthority; There is a problem with the configurations server (/user/libexec/gconf-sanity-check-2 exited with status 256); and Nautilus could not create the following required folders: /home/Moo/Desktop, /home/Moo/.nautilus
View 14 Replies View RelatedIs is possible to change my username here without registering for a new account.
View 2 Replies View RelatedIs there a username limit (like 16 or 256 characters) for linux/ubuntu? If so, what is the limit?
View 2 Replies View RelatedI accidently created an account with the wrong username. I need to change it to something else. I never done this before but I think you can issue this command "usermod -l login-name old-name" which only changes the username nothing else.I know I will also need to change the home directory to reflect the changes but I am not sure what to do.
View 4 Replies View RelatedI need to know how to specify a username using FTP, otherwise it automatically uses my linux username, and this is what happens..
Code:
ftp releases.mozilla.org
Trying 216.165.129.141...
Connected to releases.geo.mozilla.com.
[code].....
Then when i try to download it results in....
Code:
530 This FTP server is anonymous only. ftp: Login failed.
ssh to server without username and password
View 1 Replies View RelatedI'd like to find my DNS Server. To be able to run so other programs...I typed in Terminal:
ubuntu@ubuntu:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]....
When I use sudo after entering password show me:
Code: Select allhooman is not in the sudoers file. This incident will be reported.
Anyone know how to configure GDM 2.26.1 to NOT display the list of users, but instead just prompt for username and password?I tried the following (as normal user and also as root):
Code:
gconftool-2 -s /apps/gdm/simple-greeter/disable_user_list -t bool true
Then, I queried the value as follows:
[code]...
when i started phpmyadmin by localhost/phpmyadmin ..it ask a username and password ....so i know password will be of mysql but what will be the username when..bcoz when i installed mysql it only asks me the password ...it doesnt ask any username to enter at that time
View 3 Replies View RelatedBeen using 11.2 for a couple of months now, mostly I've solved my own problems or read from some preexisting already solved problems on threads like these. But, I'm not even sure where to start with this one. I cannot login under my main username, the account is set to autologin, and I get the login screen instead. When I attempt to login I get a black screen for about a second then it bumps me back to the login screen, no error messages. I'm able to login under runlevel 3, but as soon as I try to "init 5" it bumps me out and back to the login screen.
Root account works fine, and I used it to create a secondary account from which I am posting from right now. The behavior started after the system put the display to sleep while I was watching a movie in VLC, I woke it up just as it turned completely black, it hung there and I was forced to hard reboot. Had the problem ever since (for several hours now, lol).
I use Gnome but I installed KDE to see if it would resolve my problem, but no dice.
I was recently added to a group on the unix server. My active screen session has not been update to the new groups:
$groups
A B C D
$screen -r
$groups
A B C
Without closing my screen session is there a way for me to use my new privileges in the screen session? Or if not, is there at least a way I can save all of the different directories each of the tabs are on?