Networking :: Fedora 11 Gnome Application Can't Connect To Socket Port 8005
Jul 3, 2009
I have an x application I am trying to run under gnome. It assumes a fixed ip address and exclusive use of the eth0. I have run it under gnome on RHEL 5.3. I set the ip address and ifconfig confirms the correct address. When I run it I get "SocketConnect() error:
Resource temporarily unavailabele, port 8005. (on the terminal that I started it)
This is indicative that it has failed to make a connection to the outside world. One difference I notice between the non-working and the working is that, the error message seems to stop coming out on the fedora gnome, almost immediately, whereas on the other installations it will come out indefinitely until it connects. is virb0 interferring. What is different in the networking on fedora 11 then RHEL?
View 2 Replies
ADVERTISEMENT
Sep 16, 2010
I have a customer who is complaining that they can connect to prt y on IP x with telnet. They are seeing the following:
telnet x.x.x.x y
Trying x.x.x.x...
Connected to x.x.x.x.
Escape character is '^]'.
after some time the connection of course times out. Connection closed by foreign host. There is no telnet service running on this port so they cannot do anything, but they are complaining tht the fact that telnet "connects" is a security risk. I am having difficulty explaining why they are able to connect with telnet. I know it has to do with the socket layer API in Linux but I am having difficulty explaining this sufficiently. I also can't just say "this is the way linux works" to them. I am looking through "UNIX Network Programming" by W.
View 3 Replies
View Related
Feb 12, 2009
I make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.
Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:
Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451
And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!
View 2 Replies
View Related
Aug 3, 2010
I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message �Unable to connect, socket is unavailable. I cannot ping to the desktop.
View 2 Replies
View Related
Nov 20, 2009
Can we open TCP and UDP socket on same port number?
View 1 Replies
View Related
Jul 23, 2010
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies
View Related
Jul 26, 2010
If I open a raw SCTP socket, am I able to bind to a specific port? (I only want to see SCTP packets from a particular IP address AND port.) Or, any raw SCTP socket, regardless of port binding , will get all SCTP packets received by the OS from that IP address? The port doesn't matter and is ignored.
View 1 Replies
View Related
Mar 9, 2010
Is there any command in Linux to kill a socket connection WITHOUT killing its parent application? For example, I have streaming server with several connected users and I want to close socket connection to one of them?
View 1 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Mar 10, 2011
is it possible using a perl script to test for a socket listening on a UDP port on a remote host ?I work in an environment where netcat is not allowed and from time to time I need to see if a UDP port is open on a remote host.
View 6 Replies
View Related
Nov 27, 2010
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
View 3 Replies
View Related
Mar 2, 2010
#server.pl
use IO::Socket;
$| = 1;
$socket = new IO::Socket::INET (
LocalHost => '10.100.207.13',
LocalPort => '5000',
code....
it displays the message "couldn't connect to the server". How can i connect to the remote machine using tcp socket?
View 3 Replies
View Related
Jul 29, 2010
I'm using mysql server through tcp/ip with no problem. But I don't know since when I'm not able to connect through socket. There are lots of topics but my bad I couldn't find one works for me.
OS: Ubuntu 9.04
mysql 5.0.75-0ubuntu10.5
my.cnf
Quote:
[mysqld]
user = mysql
socket = /var/run/mysqld/mysqld.sock
skip-name-resolve
safe-show-database
code....
/var/run/mysqld/mysqld.sock socket exists and has chmod 777
Error:
Code:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket 'localhost' (2)
View 3 Replies
View Related
Jun 30, 2009
I am getting no packages listed in Gnome application manager gpk-application 2.27.2. I have tried 'yum clean all' and get the following error messages.
View 3 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Jul 4, 2010
I'm using fedora 13(x86_64).i got an error message while starting the mysql database software through the kernel. Code: [pradeep@localhost ~]$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) [pradeep@localhost ~]$ this is the first time i'm using the mysql in linux environment. do i have to configure anything before using it for the first time ?!
View 5 Replies
View Related
Apr 29, 2011
What is the magic that needs to be done to be able to record in audacity?
- Fedora 15 x86_64 2.6.35.12-88.fc14.x86_64
- SoundBlaster X-Fi card.
-I have added rpmfusion to yum repos.
When I start audacity the following is printed to the concole:
Code:
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
View 5 Replies
View Related
Jun 4, 2010
I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
View 1 Replies
View Related
Jun 28, 2010
After searching/googling for information related to the topic, I haven't been able to get this working in KDE. Background: I have a Dell Studio 1745 with builtin Intel 5100bg wireless card. It connects to my Linksys WRT54G router just fine in openSUSE 11.2 & 11.3 using either KDE or Gnome. In Fedora 13 it only connects under Gnome, not KDE. Those are using NetworkManager. Using traditional ifup only works in Fedora under Gnome, i.e. nothing works under KDE in Fedora.
[Code]...
View 7 Replies
View Related
May 5, 2009
I had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
View 1 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Oct 1, 2010
I am working with simple tcp client to establish connection to sockaddr_in servAddress and send data segment:
...
connect(sockfd,&servAddr,sizeof(servAddr)) < 0)
send(sockfd, pkt, pktLen, 0);
close(sockfd);
...
Elementary... Here's the tricky part: next i have to handle user level ack the server is sending to "client"... To do that i have to open server socket on the same port number the system assigned to my client socket before. How can i get it ( in user level code)?
View 2 Replies
View Related
Oct 26, 2009
I'm using a single raw socket to read UDP packets from local test network with 1024 ports. Each UDP src and dest port is unique and I need access to IP and UDP header fields. I can stream and process data (in and out) at 100 mbps in linux-rt kernel with very low jitter < 250 usec, 10 usec nominal.
I'd like to prevent kernel from issuing ICMP port unreachable errors back to the sending host, however, I don't want to create 1024 vanilla UDP sockets and bind to each one because of resource constraints. Currently, I'm using iptables to drop the outbound port unreachable messages. Does anyone know of a way (programmatic using C code) to prevent the ICMP unreachable traffic? Perhaps an IOCTL or socket option? I also tried changing /proc/sys/net/ipv4/icmp_ratelimit but that seemed to have no effect. By default the ratemask is set for dest unreachables and a variety of ratelimit values did not change any behavior that I could see.
View 5 Replies
View Related
Apr 3, 2010
I would like to connect my pc to the TV but the vga cable is not compatible with my analog Tv.The pc that i'm using is equipped with everything, except it hasn't got an agp port for my TV-OUT video card.I have a second motherboard with cpu(+power source) on it, but it's too slow so i don't want to use it.So! My idea is to connect the pc to the second motherboard, and use the second motherboard just for the agp and the TV-out video card.(i really don't have no money for signal converters and new video cards at all)
View 2 Replies
View Related
Mar 13, 2010
I can't seem to get on my Twinkle SIP Phone, it says: "Failed to create a UDP Socket (SIP) on port 5060 Address already in use" after that message it brings me back to the window were I'm supposed to run my profile, how do I fix this?
View 6 Replies
View Related
Sep 26, 2010
I am trying to create a socket to listen for a bootp response so I am using a PF_PACKET socket so that I get the response based on my mac. My problem is that I don't want to hear all traffic (as I do now) so would like to use a specific port number and bind to it.
View 1 Replies
View Related
Jun 26, 2011
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...
View 2 Replies
View Related
Jan 31, 2010
I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
View 1 Replies
View Related
Feb 26, 2010
I have a java application that I wrote recently. It runs off port 9955. The application runs great on my mac server. When I installed it on my linux box i cant get to it from outside the box. A port scan shows the port as closed. I flushed my iptables, did not help. I can telnet into the app locally, from the server and it works great. I cannot telnet from outside the server. I have a reference to the application in /etc/services as a tcp port (which it is).
netstat shows it as listening
netstat --listen
tcp6 0 0 [::]: SimpleSocketTest [::]:* LISTEN
netstat -anp | grep 9955
tcp6 0 0 ::: 9955 :::* LISTEN 1484/java
View 4 Replies
View Related
Feb 22, 2011
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
View 7 Replies
View Related
