Networking :: Redirect Ports To Another Machine On Same LAN
Dec 15, 2009
I have a bit of a strange scenario. I have a machine with a fixed IP (192.168.0.108), running Linux. It has an external IP 99.99.99.8 via a 1:1 NAT on a Cisco ASA/router. Port 3389 (MS RDP) is open for 99.99.99.8. I want my Linux machine to listen on port 3389 and redirect all traffic to that port to a Windows machine (192.168.0.100). In this way, my Linux box is able to respond to requests on all ports, but port 99.99.99.8:3389 connects to Remote desktop on the Windows PC. I do not have access to the Cisco NAT config. I was able to get this setup to work by using an SSH tunnel.
I ran this command on the linux box:
ssh -L 3389:192.168.0.100:3389 ergosteur@192.168.0.108
Any ideas? Perhaps using iptables or something?
View 5 Replies
ADVERTISEMENT
Sep 17, 2010
I have eth1 and eth2 connected with back to back cable on the same machine.
I configure eth1 with 11.11.11.11 and eth2 with 11.11.11.14.
I use ping -I eth1 11.11.11.14, I get Destination Host Unreachable...
using tcpdump on eth1 shows ARP request broadcast being sent out
using tcpdump on eth2 shows ARP request received, no ARP reply being sent out
Not sure whether this config is supposed to work?
View 2 Replies
View Related
Feb 19, 2011
I have had a look at the the information on the ubuntu forum about this but am having trouble getting the server to do what i want it to do.
I have a VPS running ubuntu 9.10 and i am trying to set it up to redirect port 25 to a remote machine via a VPN connection (remote machine connected via VPN)
i have tried setting this up in the firewall using webmin but it is not working.
View 3 Replies
View Related
May 26, 2010
i have a problem........ How to redirect local http port to remote ip ddress(192.168.10.64) using iptables..my destro is Centos 5.3 my rule is this iptables -t nat -A PREROUTING -s 0/0 -d <my local ip> -p tcp --dport 80 -j DNAT --to-destination 192.168.10.64
View 1 Replies
View Related
Jul 14, 2009
Have done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
View 4 Replies
View Related
Sep 29, 2010
My poblem: At work I have a proxy with some closed ports. I need to connect to an Oracle DB on some DB_IP at port 1521. DB_IP is a public IP. What I Have: At home, I have a Linux machine and a Linksys WRT54G Router. What I need: How can I do to communicate a PC at work with DB_IP:1521?
View 1 Replies
View Related
Nov 8, 2010
I have a server that is on a high port number, and people want it on port 80. For root exploit issues people say the server can not run as root. So to solve things I want to redirect port 80 to a high port number, say 12345 on the machine. This has been discussed all over the web, so I find I need to do this:
/sbin/iptables -t nat -A PREROUTING -p tcp -d 123.45.67.89 --dport 80 -j REDIRECT --to-ports 12345
/sbin/iptables-save > /etc/sysconfig/iptables
And I do this, an voila things work for the whole world. All machines in the world can see the server on port 80 on the machine.Except, on the machine itself. On the machine 123.45.67.89, I try to get to the server on 123.45.67.89:80, I get a can't connect error. On the machine if I try 123.45.67.89:12345 I can connect.What am I doing wrong here? I don't want localhost network really, I want the ip address and port, but I want the forwarding to work on the local machine. But it doesn't...
View 8 Replies
View Related
Mar 25, 2011
I am trying to show library content (asp files, IIS server, MySQL database on Windows Server 2003 - Inetpub/wwwroot/library - 192.168.0.3) publicly. But Apache webserver is on Linux machine. In one of previos topics I was adviced to mount this remote machine webfolder into Linux /var/www. Well this way it want work. I was adviced it can be done through redirecting.
View 14 Replies
View Related
Mar 1, 2011
This morning I was looking at the router's log file and noticed a certain IP address was able to gain LAN access on port 2222. That just happens to be the port my SSH server is listening on! A whois search revealed that IP address is in Germany. As soon as I found this out I stopped forwarding all ports to this machine in my router.
how to tell what had happened, what information this person was able to obtain, and if he left any goodies behind that could hurt me? I've read through some of the logs on my computer and haven't been able to find much at all. I did have some personal information on the hard drives, but that information is encrypted. I'm thinking if they were able to get my SSH password then that information probably isn't safe either (assuming they have some of it).
View 7 Replies
View Related
Oct 23, 2010
I'm trying to list all ports less then 1024 on my current machine which are open in the listening state, one port per line
View 1 Replies
View Related
Mar 4, 2010
I use Centos 5.4, squid 2.6 stable21
I want to redirect only one url to another in a simpliest way.
View 3 Replies
View Related
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Mar 18, 2010
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies
View Related
Jul 24, 2010
It seems whenever i create a folder it creates the folder as untitled folder, but i can't change the folder name it just says "you don't have permission to rename item" but yet i created the folder and it is there. One thing i have noticed is that once i enter a folder it won't even let me move the folder.
View 6 Replies
View Related
Dec 3, 2008
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
View 2 Replies
View Related
Mar 9, 2011
I am trying to grep multiple numbers from file, grep does have the -f option for that.
Code: grep -f <`seq 500 520` /etc/passwd I know this could be done with
Code: for i in `seq 500 520`; do grep "$i" /etc/passwd; done But my question is fare more behind this example. It is possible to redirect one command output which will be treat as a content of file for another command ?
View 2 Replies
View Related
Feb 20, 2011
I have an issue with the manner in which Network Manager is configuring the network and short of ditching Network Manager I can see no solution.The issue : Getting a machine to update its machine name in the DNS serverSounds simple doesn't it I operate a FreeBSD based firewall / DHCP / DNS server, using a default Network Manager DHCP configuration the Fedora clients do not register their names with the DNS server when they obtain an address.
I have traced the communications with Wireshark and the Fedora clients are NOT supplying the PC's hostname as part of the exchange so this is NOT a DNS server configuration issue. If I uncheck the option 'Automatically obtain DNS information from provider' under the DHCP settings the Fedora clients DO register the hostname that is put into the Hostname (optional) databox. They do NOT however store the DNS server IP address or any other records defined by the DNS server.
Is there some hidden settings or is this a bug because it isn't acceptable 'DHCP' behaviour if it isn't possible to automatically set DNS server IP addresses and at the same time register the hostname during the DHCP negotiation. Before it is said I know I can use a fixed DNS IP address but am not prepared to long term, I am also not prepared to define the Fedora clients with a 'static' IP. I am similarly not interested in playing around with scripts or any other such 'frigs' to achieve what should be a standard activity - registering a host with DNS during the DHCP negotiation.
View 3 Replies
View Related
Aug 28, 2010
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
View 3 Replies
View Related
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
View Related
Jul 6, 2010
I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies
View Related
Dec 17, 2010
I'm writting an app for desktop and embedded linux and I need to get information about the multiserial port, and I need to know which port is been used (by a printer, por example).The multiserial I'm using is an Altera Corporation Device 0004, and I just need to tell how many ports are there and how many is been used.
View 3 Replies
View Related
May 29, 2010
I can set-up an ssh tunnel from machine A to Machine B:-
fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com
I can successfully logon to machine A to Machine B.
what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.
View 5 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Mar 1, 2011
I've run into a weird problem. Two of my linux machines (A and B, both running CentOS 5.5) are connected to the same wall ethernet socket via a hub. Bothf them are configured for static IPs. The trouble is that when machine B goes offline or hits a kernel panic, machine 1 goes offline too. What I've noticed is that in this condition the "route" output from machine A does not show any entry for the default gateway either The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 for machine A are:
Code:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0
[code]...
View 3 Replies
View Related
Jul 20, 2011
where to look for setting up my web server A so that if I have to bring it down for maintenance, all web traffic will go to my backup server B. I thought about changing DNS entry but that will take time to update.
View 2 Replies
View Related
Apr 9, 2010
I'd like to set up an iptables configuration as follows:- Allow all traffic by default- For one user account (anonymous), block all traffic except:- All traffic on lo- All DNS requests, which should be redirected to 127.0.0.1Here's what I tried:
# Redirect
iptables -A OUTPUT -p udp -m owner --uid-owner anonymous -m udp --dport 53 -j REDIRECT --to-ports 53
[code]....
View 3 Replies
View Related
Jul 18, 2011
I have a virtual environment, RHEL6 minimal install. On that, I am trying to run Liferay6 on Tomcat6 for the purpose of writing prototype business portals. I used the Liferay+Tomcat bundle downloaded from the Liferay website.
For security reasons, the server can only be accessed through port 80, and Tomcat listens on 8080. (I know I can run it so that it listens on another port, but I'd like it on 8080)
Goal:
Use iptables to forward traffic destined for 80 to port 8080.
What I Did:
Configure nat to forward tcp packets from 80 to 8080:
Code:
List the nat iptable:
Code:
wget to 80 doesn't work:
Code:
What I Already Checked:
Tomcat did start normally. Logs show no errors, and specify that Coyote HTTP/1.1 is initialized on http-8080. I can provide this log if need be.
Tomcat is listening on port 8080:
Code:
Code:
I get the same negative result on the VM on the server as I get on a RHEL6 VM on my laptop.
The iptables method that I described above does in fact work with Liferay6 on Tomcat6 on Ubuntu 10.10.
I have looked at this thread. I appear to have tried everything that was mentioned there.
Actual Question: I would like to know how to effectively forward 80 to 8080 on RHEL6, so that I can access Liferay on Tomcat (listening on 8080) at 80.
View 4 Replies
View Related
Mar 24, 2010
I work for a auto dealership, and they have a proxy server that is provided by toyota that does nothing other than route traffic some specific sites they use in the dealership. We are looking to put a local proxy server in place to filter web traffic of virus/inappropriate content. What I am looking to do is set everyone's proxy settings to point to our server but when someone puts in the toyota sites it will redirect them to toyota's proxy server and out. I am not sure if this is possible or not.
View 2 Replies
View Related
Feb 2, 2010
I have "Server A" with real internet ip 1.2.3.4 (eth0) and lan ip 192.168.1.1 (eth1) There's also "Server B" with lan ip 192.168.1.2 (eth0), I'm running an Apache Web server on "Server B", so I want to redirect all traffic from IP 1.2.3.4 port 80 (Server A) to 192.168.1.2 port 80 (Server B), using the following rule:
[Code]....
iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 --dport 80 -j DNAT --to 192.168.1.2:80 This actually works pretty good, from internet I can browse ttp://1.2.3.4 But the problem is that if I check the Apache logs, all incoming connections seems to come from 192.168.1.1 instead of showing the real source ip addresses (internet ip's) so this is screwing up all my web stats, I've been looking for hours and hours on how to make a transparent redirect, but can't find any info, I know there must be a way because my old WRT54G router which uses iptables could do it.
View 12 Replies
View Related
Mar 31, 2010
I have recently just got another internet connection at home via cable as well as my exisiting DSL connection. I was wanting all my web browsing that I did via squid to be redirected down the cable connection. The box has a single nic at the moment and the default route sends it via the dsl connection for the mail server that is also running on the box.I was hoping that anything that hit squid would go down the cable connection that is plugged into a router and thus I can route to 172.16.2.251 and everything will go out via cable.
I was reading about iproute2 and marking the packets and is wondering whether this is the way to go?
View 3 Replies
View Related
