Networking :: Odd Internet Stopped Working - Symptoms Hard To Describe - Explained?
Jan 8, 2011
im not quite sure how to succintly say what is happening. the general idea is that my internet stopped working and I dont know why. I have a netbook that i am using while i am backpacking through asia. it has both ubuntu netbook ed, and winXP dual booting on it. out of the blue, i could not aquire an ip address through dhcp. This was true in both windows and linux, AND true while using either a wireless or wired connection. ok, that is odd, but not a big deal, i will just set the ip / subnet mask / gateway / dns manually. After doing this the computer reports properly connecting to the internet (did the same tests and got the same results in both nix and winxp), however I could not do anything on the internet. could not ping, nor do a dns lookup much less anything else.
scraching my head I looked around the internet for a solution and came across 'netsh int ip reset' this is a command I typed into the windows command line. I'm not sure what it does, but it worked so far as now
[Code]...
View 5 Replies
ADVERTISEMENT
Jun 13, 2010
My computer wouldn't come out of sleep mode, so I had to shut it down improperly. Now there's no ethernet network connection. The NIC works as I can start the computer by wake-on-lan, but somehow Ubuntu no longer sets up a network connection on it.
The green light on the NIC is lit up and blinking. I have changed no settings. It used to get an IP address from the DHCP no problem, but ifconfig now only shows 127.0.0.1.
View 2 Replies
View Related
Feb 21, 2010
I'm currently running Ubuntu 9.10.After I updated to 9.10, my wireless connection stoppped working. I can access the network but I get no response or what so ever in my browser.Downloading language support or any software doesn't work either.Haven't changed anything to my settings and checked the router. Router works just fine.
View 7 Replies
View Related
Apr 28, 2011
I had shut down my laptop at work last week and when I booted it up the wired internet connect was not working.The wireless connection is working (I'm typing now via wireless).I have WinXP Pro on this machine (but I've never used it--I'm all Linux now). So I booted into WinXP and turned off the wireless and got internet connection through the ethernet cable, so it doesn't seem to be the cable or my ethernet card.Here is the output of "ifconfig"
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:25:7a:fa:b6
inet addr:xxx.xxx.xxx.xx Bcast:xxx.xxx.xxx.xxx Mask:255.255.255.0
[code]....
View 4 Replies
View Related
Jul 22, 2011
I am using Ubuntu 11.04 desktop. I a, using my internet through wifi and it was working fine but suddenly it start strange activities... like when I restart ubuntu it work for few clicks but then suddenly stopp even wifi is showing connected but I cant use internet.
View 5 Replies
View Related
Apr 8, 2011
my Internet connection stopped working suddenly after updating the packages using synaptec package manager and rebooting it..can anyone say me why did this happen.BTW,mine is ubuntu 10.10 and i am absolute new to linux.I had to configure my n/w connections right from the scrap again
View 2 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Aug 26, 2011
I have a 2TB hard-drive connecting via a usb port on my server for automatic backups. I noticed the backups had stopped working and then I realize I had lost the ability to communicate with the drive.
/sbin/lsusb gives:
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 005: ID 059f:1018 LaCie, Ltd
[Code]...
View 1 Replies
View Related
Sep 14, 2010
I boot up, internet doesn't work. What do I do? I get the internet icon with a read exclamation mark on it and by default "enable networking" is disabled. This is the second time it has happened to me.
View 3 Replies
View Related
Dec 11, 2010
From one day to the other it crashed... So, I've deleted the link and when I try to install it again the PC failed to detect the device... But it works on windows... Even when I try to put my card on a device of the same operator, it works in a Toshiba with Ubuntu 10.10 but not on mine PC... I've an ASUS F3Sseries and all of the updates installed
View 6 Replies
View Related
Dec 12, 2010
My brothers computer uses Ubuntu. All of a sudden the internet stopped working. So I did some research online and found a site that looked like it would work because the comments were good. I did what it said by removing the network manager and then i had to re-install it blah blah blah. Long story short his computer is still without internet. I tried to download the network manager on my computer and install it on his computer. I dont think it worked.If anyone could help me find the correct network manager to download for his computer and then help me get internet back onto his computer.
View 7 Replies
View Related
Jul 24, 2010
Allright, I bought a new dedicated box about two months ago. For most of the time, I have had major intermittent latency and downtime.Pings and traceroutes would always work, <70ms. However, all daemons would be inaccessible for periods of time spanning from 5 minutes to hours, at which point I would have the box rebooted and it would work again.After having hardware tests done numerous times, they kept saying it was software related. No logs showed problems.Finally, tonight a tech found that the network cable was frayed or something of that nature. "Noticed that your connection to the switch was exposed and replaced the cable"Would that create symptoms I've described above?
View 4 Replies
View Related
Jul 29, 2010
I use Fedora now for 2 days and all worked fine, but now I have a problem:My wireless internet doesn't work anymore. Normally I see a icon at topbar that tells me I'm connected but now it doesn't.I connected my laptop to my router directly and downloaded WiFi radar to see if that works. That program says: "Not connected".I'm sure the internet card is connected and the switch on my laptop is on. I only deleted BlueTooth, but I don't think that's the problem.
View 1 Replies
View Related
May 7, 2011
I've had Debian on my laptop for around 4 months which I rarely use. I'm using Squeeze since it seems to be the only release that will work with my ethernet card.The internet had been working fine for a couple of months but broke when I tried to allow port forwarding for torrents. I could only connect to the internet after this by using:
iptables -F
iptables -X
iptables -t nat -F
[code]....
View 2 Replies
View Related
Apr 2, 2010
I have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.
View 2 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Nov 11, 2010
I switched my FC11 system off yesterday. Turning it on this morning, NO domain names can be resolved anymore.I can ping IP adresses directly, and even get to them in FireFox if I type the IP address. However, typing any domain name at all fails. I cannot ping or SSH to any domain name, but as soon as I enter an IP, it works. I can ping the DNS server by IP that is set in my /etc/resolv.confI checked on an XP system using the same DNS server set in /etc/resolv.conf (which can also be pinged on IP from my FC11 system), on the same connection from the same ISP, and it works.E. g. without touching anything at all (and all updates are turned off) my FC11 system has stopped resolving domain names.I'm running 32bit FC11. The system has been working fine for more than 2 years.So it has spontaneously stopped doing DNS when I enter a domain name. Where can I start looking?
View 1 Replies
View Related
Nov 6, 2010
Wired and wireless networking have been working flawlessly for years on my HP Compaq 6710b laptop. Several weeks ago, after an automatic update via the update manager, my wired network stopped working. I did not notice it directly, since my wireless connection took it over. I only noticed it when I had to work in an office where I didn't know the wireless password.Since then, I have been trying several things and searched several forums. It is hard to find any troubleshooting information about wired networking, as most of the problems seem to occur with wireless.
I did verify that there is no hardware problem. My laptop is dual boot and when I boot the other operating system, the wired network works without problems (as does the wireless.)My Ubuntu version is Ubuntu 10.04.1 LTS. My kernel version is 2.6.32-25-generic i686. I hope anybody can help me getting my wired network working again.
View 5 Replies
View Related
Mar 18, 2010
I am having problem with wireless networking my fedora 12 since i opened network manager yesterday. But to my notice i haven't done any changes. But still i am not able find any reason for the wireless network not to work. When i try to restart the network servies it gives the following msg.
Quote:
Bringing up interface eth0:
This version of ISC DHCP is based on the release available on ftp.isc.org. Features have been added and other changes have been made to the base software release in order to make it work better with this distribution.
Please report for this software via the Red Hat Bugzilla site: [url]
Did i do something wrong with the network manager or did something go wrong with fedora.
View 2 Replies
View Related
Jul 22, 2011
I have been using the commandline for network manager cnetworkmanager in Fedora 14 without any problem. For the most part I used it to restart my vpn connection like so:
Code:
cnetworkmanager --activate-connection=user,'AAABBBCCC',eth0,& this was in a script that I put in the /etc/NetworkManager/dispatcher.d/ folder so it would start automatically whenever the vpn disconnected.
Last night, I had an epiphany and upgraded to Fedora 15, which seems to be working fine for me after updating a few programs including cnetworkmanager
At one point I realized that my neat little script wasn't working anymore though, so I checked out what happens at the commandline when I type the above command in:
Code:
[captainralf@Cap ~]$ cnetworkmanager --activate-connection=user,'AAABBBCCC',eth0,&
[1] 30884
[captainralf@Cap ~]$ Traceback (most recent call last):
File "/usr/bin/cnetworkmanager", line 319, in <module>
[Code]....
View 1 Replies
View Related
Jan 22, 2010
I successfully set-up an FTP server, that worked great and perfectly, but after restarting the computer, it has stopped working.None of my router's settings have changed. I restarted the vsftpd process.
View 2 Replies
View Related
Feb 25, 2010
pulled the wireless USB adapter out of the back of my laptop when I was using it. I plugged it back in and it can see my wireless network, but it can't connect. Everytime it tries, it just shows the connecting icon on the top bar for a few minutes and then says that the network has been disconnected.
I've tried uninstalling and reinstalling the USB adaptor, but nothing I've done seems able to fix the issue. Anyone know how to fix this?
The USB adaptor I'm using is a Trendnet TEW-424UB
View 1 Replies
View Related
Apr 29, 2010
I have had ubuntu about a month now and everything has worked great up until now, I was surfing the web and all the sudden I lost connection. I tried to connect to the signal but got nothing so I did a reboot. After the reboot my wireless signal didn't show up. i right clicked the connection icon on the top taskbar and the enable wireless is blacked out to where i cant click it.
View 7 Replies
View Related
May 20, 2010
i installed and ran System Profiler & Benchmark ran a test. then i rebooted and turned off ACPI/PowerNow. at this point i realized my network card had gone down so i went back an turned the ACPI on. nothing changed.
View 1 Replies
View Related
Jun 30, 2010
I have a Thinkpad T400 notebook that dual boots windows 7 and Ubuntu 9.04. My wireless has worked both in windows and ubuntu for the past several months. However 2 days ago, the wireless in ubuntu stopped working. I think this may be a result of trying to set up a static eth0 connection between my laptop and an embedded board, but I dont see how messing with eth0 would stop the wlan from working.
Symptoms: When I left click on the network connections icon in the tray, all it lists under "Wireless networks" is "device not ready". Needless to say, there are no networks available to connect to. Also the wireless is working fine under windows.
[Code]...
View 1 Replies
View Related
Aug 2, 2010
Last night I was trying to get my printer working, and when I rebooted, I lost networking and sound.I am currently booting on a live CD, and sound and networking are fine-- so it can't be a hardware issue (obviously). I must have inadvertently broken something, but I can't figure it out.I have tried restarting networking, but it doesn't respond-- it says stop/waiting or something like that.I can't access the sound preferences-- it says waiting for sound to respond (or something like that).
When I reboot, sometimes I see a terminal window with the same line scrolling very, very quickly-- something about waiting for USB. Additionally, the system is very slow to respond-- clicking a menu item can take a long time for it to appear, etc.What could have occurred, and how might I troubleshoot it?
View 9 Replies
View Related
Aug 4, 2010
Just recently the wireless stopped working on Ubuntu 10.04. The machine is AcerOne AOA-150. I did notice recently the wireless would stop working, and I would need to either 1) reboot 2) switch the wireless off by moving the switch from left to right in front of the laptop.
However, this time nothing is working. I've provided some detail and if more information is needed, let me know.
LSPCI:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
[Code]....
View 4 Replies
View Related
Apr 30, 2011
On 10.10 my wireless card worked out of the box. Now on 11.04 it stopped working after the update!. My card is Atheros AR5001.
View 6 Replies
View Related
Jun 17, 2011
Been searching for hours and looked at several other threads but still can't figure this out. We have 4 folders being shared from a Ubuntu 10.4.2 LTS Server using Samba. A couple days ago two computers in the office lost access to these shares. The other computers in the office are fine. So far as I know nothing has changed on the server. I can putty into the server still but I can't map a drive or open a window through run (\server_nameetc).
I've also tried disabled iptables on the server and windows firewall on the the windows xp machines. Still no luck. What am I doing wrong? Like I said, so far as I know there have been no changes to the server whatsoever. One day it was working and the next it just stops.
View 3 Replies
View Related
