I am having 2.4.18 kernel on vmware workstation(version 6.0.0 build-45731) in my system, I want migrate to 2.6.28 kernel. Having 2.6.28 source with me. What are the dependencies like gcc, binutils, glibc etc.
View 1 RepliesI've been looking at Gnome 3 and the Gnome Shell and I don't like what I see. The Gnome devs are taking things in a direction I don't like, giving us new ways to do things that don't interest me and making them mandatory. AFAICT, in the long run there's no real way to configure things to work the way I've been doing things for the last fifteen years. This is not a rant, not (mostly) a complaint, merely an observation. Clearly, I'm not part of their target demographic and I doubt that I'd want to be under the circumstances.
To me, that means it's time for me to move on and try something different. After some careful research, I've migrated my laptop to XFCE and am very happy with it. Now, I'm about to do the same to my desktop. This leaves me with an interesting question: what's the best way to remove Gnome from my two machines without removing any support needed for various programs that I'm accustomed to using and expect to continue using?
I am considering moving to Ubuntu 10.04. Is there any way of migrating the programs and games that I have downloaded in Ubuntu 9.04 to Ubuntu 10.04? I have also downloaded the Kubuntu KDE desktop.
View 4 Replies View RelatedI have 3 SATA hard drives, one 500GB NTFS with Windows, one 320GB With Linux (one partition)and one newly purchased 1TB. The 500GB has Windows, which I use to LAN and do graphic stuff while I set up Wine. Its got 1GB free space. The 320 I found in my garage, and is on it last leg, often not showing as boot or displaying as "Bzbzbzbzbzbzbzbzbzb bzbzbzbzb" (No lies). As I was low on space already, I decided to by a 1TB, move Ubuntu across and go from there. How would I copy my system from one HDD to the other, and also add a 500GB NTFS partition. What is the ideal way to set up the partitions, and how big should my swap be? I looked for partitioning guides but they're all really outdated (one suggested a whole 128mb swap).
View 2 Replies View RelatedI have upgraded to 6gb of ram on my lenovo x201. Unfortunately Fedora 14, 32bit version, allow to use only 3gb of ram.
I need now to migrate to 64bit.
What is the best way to backup my actually configuration and restore later?
For example I have my gnome inteface customized, notes in gnote...etc.
I dont want to set up again from scratch.
Ive been using Ubuntu 32bit on my work Dell E6400 for nearly a year now with no problems. It is capable of running Ubuntu 64bit and Ive tried out the live CD which seems ok. I have a spare 40GB HDD and a USB caddy so Id like to install Ubuntu 64bit onto that and start working with that as a trial. Once im happy I can get all the usual things I need for my work (like vpnc) working then I'll wipe the main internal HDD and install Ubuntu 64bit.
Apart from backing up my home directory, id like to backup a list of my installed packages as a list of reference so I know what to add into my new install. Is there a "apt" command to do this and list the packages in a way where if I install those packages, I'll not hit any dependancy problems by installing one before another?
Is it possible to migrate from Linux Mint 11 to Ubuntu 11.04 without reinstalling the whole system, i.e. as if it was an upgrade from a previous version from Ubuntu. I would like to avoid having to reinstall and reconfigure all the applications I installed in Mint.
View 2 Replies View RelatedI recently migrated from SuSE 11.2 to UBUNTU 10.10.I didn't run into any major problems until I tried to boot into XP.The screen just goes blank.My search of other threads revealed error message problems but no blank screen problems.Would it make sense to backup my home files, reinstall XP and then reinstall UBUNTU?
View 3 Replies View RelatedI've been using a wubi install of Ubuntu 10.10 for the past few months on my girlfriend's laptop, which has less hardware issues than my more recent laptop. Now that I'm a little more versed in Ubuntu, I'd like to transfer my Wubi install onto an actual partition on my laptop drive for a traditional dual boot.
Is this possible, and if anyone's done this before, would you be able to spare a few minutes and outline the process? I wouldn't know where to start and how to do things since I'm dealing more or less with a file system acting like a partition than an actual one.
I found the steps of migrating a Wubi install to partion via the Wubi Guide, but it seems those are steps for migrating a wubi install to a new partition on the same computer.
I have just updated my Lenny 64 to a squeeze 64, everything is fine exept missing icons in the system menu, unfortunately I couldn't do any screenshot to show you the mess, did anyone experience the same problem and how was it solved.
View 6 Replies View RelatedI have a working system running Jaunty. For various reasons I want to move to Karmic, but I don't want to use the "upgrade" feature in the software update manager. I need to swap some hard drives around, so I want to do a fresh installation. My question is, what is the easiest way to "migrate" a user to a fresh installation? On a Mac you can simply run the migration tool and it moves everything into place with relative ease, whether from a backup drive or from one computer to another. Is there any analogous program in Ubuntu? Or is it just so simple that such a program is unnecessary?
View 1 Replies View Relatedi started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies View RelatedI want to upgrade from another distro to ubuntu server for a few reasons. The only problem is I have a lot of data that needs to survive. here is how my computer is setup. I've 5 drives on the computer,
A- 10gb drive for OS and swap only, no data
B,C,D,E - 4x 500 GB drives in a LVM. they make up one large drive with xfs and this volume has about 1.2 TB of data. there is nothing fancy on it, no encryption and no software raid of course the little 10gb drive can be formatted no problem, but the LVM needs to be migrated over intact.
without realising I started thunderbird from a root window, I set it up along with rules and about 2 hours finetuning.
I figured out how to get the icon on the top panel, but that is naturally started as my user gsm.
Is there an easy way of migrating the whole mailbox and subfolders form the root install to the gsm user?
Or is it easier to start from scratch?
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
I get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View RelatedI use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
With the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.
I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.
So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.
I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
i just updated my mainboard, because of a failure in the grafic chip. Now I have a icore 7-2600K CPU with 16GB memory.The system will not boot with the latest kernel version Kernel 2.6.38.11 - Kernel 2.6.38.10 . It crashed and resets the system.
But when I am using Kernel 2.6.35.30, then it works, as you can see. As well the kubuntu 64bit CDROM does not work. Crashed as well.
I'm in the process of duplicating all the data from my existing filesystems to a new storage solution. I know it is not recommended to do so but this will be a *lot* faster then having to reinstall and reconfiguring the system from scratch...I've synchronized the filesystems using rsync, used the following command line for that:
Code:
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --human-readable / /mnt/sde1
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --[code]....
To make sure all data is mirrored properly, the next step is to boot into a live system and rerun rsync to copy any previously locked/altered files to the new storage. After moving this, I know I have to edit /etc/fstab on the new storage to make it match the proper UID for the drives. I also have to update grub and install grub into MBR of the new storage.
I recently converted from MS 2003 to Ubuntu 10.04.1 and i wish to change the filesystem of all my data disks from NTFS to EXT but i have run into a problem. When i delete the old nfts partition and create an EXT4 partition, i can see that on the newly created partiton the used space is about 20gb. I used gparted for this. I have read that EXT reserves some space for root, but since all the disks i wan't to convert is only used for data and not OS, i see no need for the reserved space. I found some commands to turn of the root space but that did not work so i changed to resiserfs but that very slow, unstable and under limited development.
View 1 Replies View RelatedI have a Linux system running on an older Sun V20z. The drives are mirrored in a software RAID1. The motherboard has interfaces for only IDE and SCSI. The system is old and is no longer able to handle the load we're putting on it. I also have a much newer Sun X4100. This system is presently unused and has a pair of SAS drives in it. The new server only has SAS and SATA connections on the motherboard, though. I'm trying to think of the best way to clone the V20z over the X4100. I don't mind breaking the mirror knowing I can re-establish it later. I prefer not to do a fresh OS install followed by a tape restore. I would much rather break the mirror and clone one of the SCSI drives the SAS drive. I do have a USB to SATA adaptor for migrating external drives. Anyone know if this will work with a SAS drive? Any pointers on the best way to migrate this? I'm thinking even if the cloning is successful, I'm going to have to much with GRUB to get it to boot from the SAS drive?
View 1 Replies View RelatedI have Fedora Core 6 on a IBM X3400 System. It is live ftp server with Static IP.
Now can I move that server to a machine with Pentium D Dual Core, 1 GB DDR2 without having to install anything.
If I do need to install a new version, can I atleast move all System / Network Configuration from old to new server ?
I am now using SuSE 11.1 with KMail 1.9.10 (KDE 3.5.10 "release 21.13.1" open SUSE). My intention is to do a clean install of 11.4 from purchased DVD and then migrate (import) all of my personal files from a backup. I have not yet seen either SuSE 11.4 or KDE4, so I am unfamiliar with any changes to the folders and files, how they may have been named, where they're located in 11.4, etc. Inoder to copy my backed up KDE 3.5 KMail into the newly installed SuSE 11.4/KDE4 KMail, will the following folders and files go into folders and files named the same in 11.4/KDE4, or will the folders and files for the new KMail be named differently and/or be located differently?
/home/<my name>/.kde/share/apps/kmail (my e-mails)
/home/<my name>/.kde/share/apps/kabc/ (address book)
/home/<my name>/.kde/share/config/kaddressbookrc (address book settings)
/home/<my name>/.kde/share/config/kmailrc (kmail settings)
Are there any issues I need to be aware of in migrating the KDE 3.5 Kmail materials into 11.4/KDE4? Or will this be as simple as when I upgraded from 11.0 to 11.1?
i have recently started using kde 4.x. I am trying to find out where are some kde 3.x feautures and how i can use them under kde 4.x
To be more specific:
A)IN kde 3.4 i was using multiple desktops. I still remember that i could see in my taskbar a preview of every virtual desktop and what applications are currently open on each desktop. In kde 4.x these icons are so small so i can't see any preview so there are not as useful as in previous verions
B)In kde 3.x i could easily create desktop shortcuts by dragging and droping icons. Right click on desktop gives no such an option.
C)What is the plasma dashboard(something like that)? Actually there is a small shortcut in the taskbar that seems to be working like the old one show desktop shortcut.
With the release of openSUSE 11.3 I decided to upgrade my three-year old computer which is running 11.0 and has been running out of disk for the last few months. I bought a new 500Gb HDD and installed it as the master drive, and moved my old drive to the slave. I installed 11.3 on the new drive. Too easy.Then I tried to mount my old drive so I could move my account files across. I wasn't able to mount the drive, which uses LVM (Logical Volume Manager). Is there any reason this wouldn't be recognised by 11.3?Then I tried to mount my new drive from my old system but 11.0 doesn't have support for the ext4 filesystem. I loaded the ext4dev kernel module with no joy:
Code:
samsara:/ # lsmod | grep ext4
ext4dev 222360 0
[code]....