I have an older ATI chip card with tv in (both cable and a/v), and would like to build me a video editing box. Is there a utility to query the card, or at least the card's bios??
View 3 RepliesI have PC with Motherboard Intel Desktop Board D945GCNL, and Ubuntu 10.10 installed on it. Graphic card was working fine, but recently i don't know what happen suddenly the visual effects stop working, and i believe the issue with the identification of the VGA. with error message "Desktop effects could not be enabled" i checked some forums related but wasn't able to solve it. when i type compiz. it stuck on the below:
[Code]....
Does anybody know what has happened to Kino - the video capture utility? Used to be packaged by packman for Opensuse but doesn't seem to be available for 11.2.
Is there an alternative I can use for video capture - or has packman just not gotten around to adding this yet?
On my Windoze machine, I use Replay Media Catcher 4 which runs silently in the background and captures any videos (FLV, AVI, MPG, WMV, etc) on any websites that I happen to go to, and saves them to a folder on my hard drive. Right now, if I want to save a video that I'm wathing from Ubuntu, I have to go to /temp, guess which file it is, and copy it after it downloads fully but before it finishes playing, otherwise Firefox deletes it from /temp right away. This is a pain.
Yes, there are screen motion capture utilities in the Ubuntu Software Center, but they're just screen scrapers that result in low quality copies without any audio. I want something that will actually capture the video stream and save it as a file. Even if it doesn't save all videos automatically like RMC4, and I have to right click on the video to Save As, that would be better than copying it from /temp at the precise exact moment.
Is there a command line utility to tell me about what's inside a video file? Say I have a .mpg file. I want to know about the video stream and the various audio streams, the codec used for the video stream, the bitrate of the video stream, and so on.
View 5 Replies View RelatedI've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedGot a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
cpuid utility is not compiled with U9.04 and the utility is not available as a package with synaptic -
other distributions have it available as rpm . url
Any way to run this utility in the Debian world?
Which file contains this line:
Code:
Mozilla/5.0 (compatible; Konqueror/4.2; Linux 2.6.29.6-smp; X11; i686) KHTML/4.2.4 (like Gecko)
I want to edit this line.
I tried assuming that the touchpad was a synaptics device and configure it as such, but it wasn't and this caused X to crash. (I also tried piping the output to grep -i and search for some key terms).
View 2 Replies View RelatedI have a problem with the unix firewall (gufw). I'm using Linux Mint Debian Edition. The problem appears when I double click on the icon to bring it up for configuring. Everything is grayed out so I click on the "unlock" button. Normally, this is when gufw comes alive with color. But all I get now is a note on the bottom of the gray screen that says "Wrong Identification". Uninstalling and reinstalling UFW and GUFW didn't fix the problem. I would like to have my firewall working for me.
View 3 Replies View RelatedAny1 know of a music player that has support for track identification service like that used in sony ericsson mobiles which records a small part of the song, then uploads it to a server, and identifies the song? or is there an open source service like this in the first place? so maybe id develop a plugin myself?
EDIT: i did find this but it doesn't have linux support
EDIT2: found this 1 is online but it requires me singing , i wonder if theres a way to query it...
I think that the biggest problem that I have had is that some of the music (and audio books) that I have gotten have not played on my walkman, or have not been able to be downloaded in to I-tunes.
First: I hate itunes... I only try to make it work because I love my wife. (and do not want her to hit me)
Second: I know that my Walkman has a very limited range of files that it can play, so I will need to convert some types of files.
But my basic questions:
* How can I figure out what format a file is in?
* Below that, how can I identify the singular characteristics of a file? (bit rate, and other formats...)
* Is there a best way to switch the formats or format options of these files. (I am currently using sox to do this, it seems to very complete)
Basically. I know nothing! The most that I do not know is that two files that as far as I can tell have the same formats, and should work the same never the less, one of them works, the other does not. I am looking to figure out a way to look at these files (maybe they are mislabeled) and figure out what their real format is (and a more complete format than just being MP3 or such) and then to be able to convert it in to a format that is able to be used by myself and/or my wife.
I want to upgrade from my 128M video (on board) to a 512M card. Since so many problems seem to revolve around video cards, which one manufacturer would be likely no cause me little or no grief installing and running?
View 1 Replies View RelatedI'm pretty sure I cooked a video card (fanless deal, prone to running hot). Anyways the computer boots fine and everything seems to be working from an ssh perspective. Is there some way I can ask the machine if the video card is broken?
View 1 Replies View RelatedIt's a geforce 9500gt 1Gb 128bits. How can i see if it's working or not? And where can I find a driver to it? I've looked in the geforce's site and i've downloaded a file with the extension .run, but this file didn't work. What should i do? Core2Quad, 4GBram, geforce 9500gt 1Gb 128bits, asus's motherboard, hd 500gb sata. Ubuntu 9.10 64bits.
View 6 Replies View RelatedI'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
This would be the one thing that has always held me back from using Ubuntu as my main OS on my desktop. Now with Lucid Lynx in the picture I would really like to try again and get some answers this time around.
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC.
On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Also on a side note, I have a small problem with CCC. When I installed catalyst and drivers I configured my screen resolution and multi-display desktop, but every time I reboot my resolution for both screens is set to 1280x1024 and they are cloned. Why don't my settings save?
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
Just installed 10.10 and I am very impressed.
I am not having a big problem at all but my built in video system is clearly behaving like it does not have the right driver.
Are there any video cards out there that are directly well-supported by linux? i.e. genuine linux drivers that allow the card to function at full capacity or close?
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies View RelatedI would like to connect a 42 inch plus tv to a Dell Dimension e521. I need to know how big of a card (512, 1gb+) to put in it to push the image. I want it to have a HDMI port.
View 6 Replies View RelatedI'm having some trouble on the search for the correct driver to my video card, an Intel Chipset. In the HP site, I can only find the driver in the windows format, and I can't find any other proper linux file on the Intel or Nvidia webpages, althougth I know they provide it. how to download the correct file?
The properties from my video card and the webpages I said are below.
Code:
HP Drivers: http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3979340
My computer is a Hp Pavillion Dv4-1465dx.
I gots pci expansion fan yesterday, thinking it would suck air from the card out of the computer. instead, it blows onto the card sucking in "fresh" air from outside. Is this effective?
View 2 Replies View RelatedNeed to upgrade to a better video card. The current card is 3/4 years old. Any body got a good recommendation. Nvida Cuda support is non existent. ATI -software not opensource.
View 4 Replies View Relatedi am looking for recommendations for a usb video capture card. i basically want to take co-ax input coming from a cable digital converter box and save the content (mpeg, avi, mkv, ...).
View 5 Replies View Related