Hardware :: How To Know The Hardware List By Kernel Supported
Jan 28, 2011how to know the Hardware list by kernel supported?
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: List Of Kernel-supported Mobile Broadband Modems ?
Jun 4, 2010I am looking to buy my own unlocked/never-locked mobile broadband modem, and I want it to work well on my 64-bit 10.04 Ubuntu system (triple-booting MacBook 4,1). Is there a list of mobile broadband modems supported in the linux kernel out there somewhere? I did try to find one myself, but no luck. The Huawei E220 looks good, but it is discontinued.
View 2 Replies View RelatedUbuntu :: List Of Which Webcams Are Supported
Mar 21, 2010Does anyone know if there is a list of which webcams are supported in Ubuntu?
View 4 Replies View RelatedCentOS 5 :: Get Officially Supported List Of Packages?
May 7, 2010Where I may get officially supported list of packages?
or it is the same as: #yum list ?
Debian Hardware :: Looking For List Of Supported Sound Cards?
Jul 8, 2011I'd like to make a complete switch to Debian. One of the things holding me back is not knowing the state of play regarding sound card support. I've been fiddling around on and off for three years trying to get my M-Audio FireWire Solo to work in Ubuntu without much joy. I think there might be greater support for USB sound cards but I'm not certain of this. Onboard cards aren't OK because in my experience these pick up too much noise. After years of using balanced audio lines it's pretty much impossible to go back. That said, a PCIe card isn't completely out of the picture if I can get balanced outs with it.
I'm planning on plugging KRK powered monitors via XLR or TRS cables into the sound card. But my preference at this point is firmly with USB sound cards. Is there an up-to-date list I can check of supported sound cards in Debian? Can anyone here provide a testimonial of their experience? It's important to note that I'm after playback only. I don't want to record ever. That should hopefully make things easier. I'd be looking at using Debian wheezy.
CentOS 5 Hardware :: Where Are Driver Source Codes And List Of Supported Hardwares?
Jun 27, 2011I would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedCentOS 5 :: Kernel Source Is Not Supported
Jun 22, 2010I am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
Ubuntu :: Broadcom 57780 Supported In Kernel 2.6.35
Aug 15, 2010Just upgraded my kernel to 2.6.35 and now my broadcom 57780 WLAN card is not recognized. Trying to reload the proprietary driver fails. Anybody else with this specific card got it working on 2.6.35?
View 1 Replies View RelatedUbuntu :: Know What File Systems Are Supported By The Kernel?
Nov 22, 2010and also I need to find answers for following two questions.How to find mountable devices and their device files in Linux?How can I allow a regular user to mount a device in Linux?
View 2 Replies View RelatedGeneral :: How Many Firewall Chains Are Supported By Kernel
Oct 20, 2010just wanna ask how many firewall chains are supported by kernel? and what are there..?
View 1 Replies View RelatedFedora :: If Run NVIDIA - That A PAE Kernel Won't Work With It - Not Supported - IIRC ?
May 11, 2011I read somewhere that if you run nVIDIA, that a PAE kernel won't work with it. Not supported, IIRC... Any truth to this? - My linux is (so it seems anyway) OK & I'd rather not mess it up. But I WOULD like to "use" all 4G of memory I have.
View 11 Replies View RelatedUbuntu :: Webcam Driver Not Supported On Latest Kernel?
May 1, 2010The microdia driver although notprovided by the manufacturer or ubuntu was available online and supported upto 9.10...but not instead of supporting it natively the support has been completely removed...i am able to compile the driver but it doesnt get inserteda complaint was also made on the launchpad bugs section and the ubuntu brainstorm page also but no action seems to have taken.....
View 1 Replies View RelatedGeneral :: Code Model 'kernel' Not Supported In The 32 Bit Mode?
Mar 31, 2011An error occured when I install my r8101 dirver. I have got the message:
/home/driver/r8101/src/r8101_n.c:1: error: code model 'kernel' not supported in the 32 bit mode
/home/driver/r8101/src/r8101_n.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[3]: *** [/home/driver/r8101/src/r8101_n.o] Error 1
[Code]......
OpenSUSE Hardware :: Audio Chips Computability - Supported In Kernel 2.6.30?
Jan 5, 2010I looked some new motherboards and most of them has these audio chips:
AUDIO: VT1708B
AUDIO: Realtek ALC1200
AUDIO: Realtek ALC800
how can I check, if they are supported in kernel 2.6.30? I looked at alsa page, and no information I have seen there. oldcpu, as I understund you, is not so important what audio chip is, but it is important to determine what hardware audio codec a device has, right? Let?s see Realtek ALC889 In realtek page: Realtek I can see details.
CentOS 5 Hardware :: Figure Out Wireless Cards Will Be Supported By The Kernel?
Jul 29, 2011Looking at getting a new laptop for some of the guys in my office, but trying to figure out if any of these wireless cards will be supported by the kernel, hoping not to do any serious kernel hacking to get them working. The cards are
- Intel Centrino Advanced-N 6205 802.11a/b/g/n
- Intel Centrino Ultimate-N 6300 802.11a/b/g/n
- Dell Wireless 1501 802.11b/g/n
- Dell Wireless 1530 802.11a/g/n
If any one has experience with those cards being supported let me know, or if you know where i can find the drivers for them that'd rock too.
OpenSUSE Wireless :: Any List Of Wireless PCI Cards Supported By OSS 11.3?
Aug 21, 2010I recently read over here: Getting Your Wireless to Work : "For example, open-source firmware for the Broadcom BCM4306/3 BCM4318, and BCM4311/1 was just released. Future openSUSE versions will be able to include this firmware and those devices will work immediately..." I am looking for PCI cards for desktops. Besides the list of supported chipsets at [URL], is there a brand name list with firmware support by OSS 11.3? At the moment, I have a Netgear WG311v3 which believe has been causing system instabilities in both linux and windoze:
01:06.0 Ethernet Controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11 b/g Wireless [11ab:1faa] (rev 03)
OpenSUSE Hardware :: Error - Kernel: [time] Sisfb: Mode 'none' Not Supported Anymore. Using Default
Aug 7, 2010I have just upgraded to 11.3 and work in icewm (I have kde apps installed but no other desktops). When I boot up the computer it gives me this console error message:
Code:
kernel: [time] sisfb: Mode 'none' not supported anymore. Using default.
kernel: [time] sisfb: Fatal error: Unable to reserve 16MB framebuffer memory
kernel: [time] sisfb: Is there another framebuffer driver active?
Apart from that I'm not exactly sure what the problem is. The computer isn't displaying immediate symptoms to me. I checked the hardware sticky and when I have a few hours I can work through
HTML Code:
http://en.opensuse.org/SDB:Configuring_graphics_cards but I don't have that kind of time at the moment, so I wanted to check that that was the route I should be going down before I did. I googled this stuff but everything seems to start from a knowledge base above mine and leaves me clueless.
Ubuntu :: Losetup Disk Encryption - Ioctl: LOOP_SET_STATUS: Invalid Argument, Requested Cipher Or Key Length (128 Bits) Not Supported By Kernel
Dec 14, 2010In 10.04 I was using the following commands to mount an encrypted disk image:
Code: sudo losetup -f Which tells what loop back device block is available Then I'd type:
Code: sudo losetup -e aes /dev/loop0 /home/user/crypt.img and then enter the device's password
Code: sudo mount -t ext4 /dev/loop0 /media/crypt I've tried this in 10.10 and it hasn't been working (I can't remember if I did anything in 10.04 to make it work). I've installed the loop-aes-utils package and restarted my machine. Every time I try the 2nd step, after entering the password I get: Code: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key length (128 bits) not supported by kernel
Debian :: Installing Kernel Sources - Compile And List
Apr 5, 2010I am not new to Debian and used to use commands like "apt-get install <package>", "apt-get update", "apt-get upgrade" and "apt-cache search <string>" regularly. But I never understood those Debian programs and the Debian package system with it's numerous programs and way to install things and work on software and configurations. Now, I just wanted to do something that I thought to be really easy. Get the source of an existing package. And despite spending over 3 hours - including reading the man-pages of commands - I cannot find a way!
Two things:
dpkg --get-selections | grep openvz
linux-image-2.6-openvz-amd64 install
linux-image-2.6.26-2-openvz-amd64 install
I already don't understand why I have two such packages installed. I would like to download the source of my kernel: apt-get source linux-image-2.6.26-2-openvz-amd64. This downloaded linux-2.6_2.6.26-21lenny4.dsc, linux-2.6_2.6.26.orig.tar.gz and linux-2.6_2.6.26-21lenny4.diff.gz
Then, I wanted to patch this - having found no explanation, I did:
cd linux
patch < ../linux-2.6_2.6.26-21lenny4.diff
That seemed to patch the kernel. But I am not sure - there are new files like this now_
[...]
Only in linux-2.6-2.6.26: xenctrl-capabilities.patch
Only in linux-2.6-2.6.26: xenctrl.patch
Only in linux-2.6-2.6.26: xenctrl-privcmd.patch
[...]
So, how can download the complete Debian kernel source? And what do I need to be able to compile it? And - HOW to just list all available sources and search in them?!? I found lots of webpages where tools like "make-kpkg" are used, which I do not understand again. Under SuSE, I could just select the package from a list, say "make oldconfig install modules modules_install" and be ready. Under Debian, I just find no way ...
General :: Compiling New Kernel - List Of Current Modules
May 25, 2011I'm trying to compile a kernel for my Crux Linux install. I figured I'd do a 'make defconfig' to setup a .config file with the default configuration and then try to add anything I will need for my specific system. I found a script that scans my system and prints out a list of any current modules I am using. That way I can make sure to add these to my new kernel. It looks something like this:
Code:
ac.ko.gz
agpgart.ko.gz
ata_generic.ko.gz
ata_piix.ko.gz
battery.ko.gz
button.ko.gz
compal-laptop.ko.gz
dcdbas.ko.gz
dell-laptop.ko.gz
drm_kms_helper.ko.gz
drm.ko.gz
ehci-hcd.ko.gz
Is there a way to add these to my current configuration without having to go into 'make menuconfig' and search for each one? It's not too hard to search for many of them. But the ones with short names I'm not finding. Like ac.ko for example. 'ac.ko' returns 0 search results and 'ac' returns anything and everything with those 2 letters in it.
Red Hat / Fedora :: List Of Recent 9 Kernel Updates With Dates?
Jun 21, 2010where I can find a list of Fedora 9 kernel updates (i.e. the updates that come through yum update) along with the dates they were released? I'd like to know when the last kernel I have installed (2.6.25.14-108.fc9.x86_64) was publicly released.
View 4 Replies View RelatedProgramming :: Traversing Inode Linked List In 2.6 Kernel?
Jan 19, 2011I would like to complete inode information from the struct list_head structure of super block structure of vfs.System call are doing operation internally, but no system call to traverse?
View 1 Replies View RelatedUbuntu :: Pae Kernel - Selection From List Appears After Grub Load?
Aug 23, 2010I am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
General :: CentOS - Safe To Remove The First Kernel In The Installed List To Save Having Two Kernels Being Updated Everytime?
May 8, 2011When I run yum list installed command the output shows two kernels:
[Code].....
Would it therefore be safe to remove the first kernel in the installed list to save having two kernels being updated everytime I run yum update? Or is the PAE kernel dependant upon the original?
Fedora Installation :: Yum Info Kernel-uname-r Produces "no Matching Packages To List"
Jun 25, 2009Fedora 11 update released today creates a dependency issue in my x86-64 system: Processing Dependency: kernel-uname-r = 2.6.29.5-191.fc11.x86_64 for package: kmod-wl-2.6.29.5-191.fc11.x86_64-5.10.91.9-3.fc11.1.x86_64 # yum info kernel-uname-r produces "no matching packages to list" the yum info pack tells me kmod-wl is: Metapackage which tracks in wl kernel module for newest kernel so it seems important to have it up to date. What should I do?
View 5 Replies View RelatedUbuntu Installation :: E - Type 'usage:' Is Not Known On Line 54 In Source List /etc/apt/sources.list
Jan 23, 2010Ive seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
Ubuntu Installation :: E: Type Sudo Is Not Known On Line 55 In Source List /etc/apt/sources.list
Mar 12, 2010I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
Ubuntu :: E - Malformed Line 57 In Source List /etc/apt/sources.list - Dist Parse
Jun 25, 2010I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
Ubuntu :: Error: E: Type 'sudo' Is Not Known On Line 52 In Source List /etc/apt/sources.list
May 4, 2011don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
General :: Bash - Shell Utils: Convert A List Of Hex To List Of Decimals?
Dec 27, 2010How can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
