Ubuntu :: List Of Which Webcams Are Supported
Mar 21, 2010Does anyone know if there is a list of which webcams are supported in Ubuntu?
View 4 Replies
ADVERTISEMENT
CentOS 5 :: Get Officially Supported List Of Packages?
May 7, 2010Where I may get officially supported list of packages?
or it is the same as: #yum list ?
Ubuntu Networking :: List Of Kernel-supported Mobile Broadband Modems ?
Jun 4, 2010I am looking to buy my own unlocked/never-locked mobile broadband modem, and I want it to work well on my 64-bit 10.04 Ubuntu system (triple-booting MacBook 4,1). Is there a list of mobile broadband modems supported in the linux kernel out there somewhere? I did try to find one myself, but no luck. The Huawei E220 looks good, but it is discontinued.
View 2 Replies View RelatedDebian Hardware :: Looking For List Of Supported Sound Cards?
Jul 8, 2011I'd like to make a complete switch to Debian. One of the things holding me back is not knowing the state of play regarding sound card support. I've been fiddling around on and off for three years trying to get my M-Audio FireWire Solo to work in Ubuntu without much joy. I think there might be greater support for USB sound cards but I'm not certain of this. Onboard cards aren't OK because in my experience these pick up too much noise. After years of using balanced audio lines it's pretty much impossible to go back. That said, a PCIe card isn't completely out of the picture if I can get balanced outs with it.
I'm planning on plugging KRK powered monitors via XLR or TRS cables into the sound card. But my preference at this point is firmly with USB sound cards. Is there an up-to-date list I can check of supported sound cards in Debian? Can anyone here provide a testimonial of their experience? It's important to note that I'm after playback only. I don't want to record ever. That should hopefully make things easier. I'd be looking at using Debian wheezy.
CentOS 5 Hardware :: Where Are Driver Source Codes And List Of Supported Hardwares?
Jun 27, 2011I would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedOpenSUSE Wireless :: Any List Of Wireless PCI Cards Supported By OSS 11.3?
Aug 21, 2010I recently read over here: Getting Your Wireless to Work : "For example, open-source firmware for the Broadcom BCM4306/3 BCM4318, and BCM4311/1 was just released. Future openSUSE versions will be able to include this firmware and those devices will work immediately..." I am looking for PCI cards for desktops. Besides the list of supported chipsets at [URL], is there a brand name list with firmware support by OSS 11.3? At the moment, I have a Netgear WG311v3 which believe has been causing system instabilities in both linux and windoze:
01:06.0 Ethernet Controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11 b/g Wireless [11ab:1faa] (rev 03)
Hardware :: How To Know The Hardware List By Kernel Supported
Jan 28, 2011how to know the Hardware list by kernel supported?
View 1 Replies View RelatedUbuntu Multimedia :: Webcams - Use With 8.04
Feb 27, 2010Does anyone know of any good webcams that I can use with ubuntu 8.04 and up? I'm having trouble with compatibility on many webcams.
View 7 Replies View RelatedUbuntu :: Software For Viewing Other's Webcams
Mar 5, 2010My wife use to look at this webcam using the Opera web browser, setting it to reload each 2 seconds or each second or so. However, she'd like to be able to watch the link in a minimal window without having to start the web browser. Anyone know of such a program? The program is supposed to open the link as an image and update it every second or so. It should be "ultra light" and have a minimal user interface.
Another option would be to view the webcam directly on the desktop instead of only having a picture there. Is that possible? What additional software does she need for that? She has compiz fusion installed, if that matters. She has Ubuntu 9.04 on one computer and Ubuntu 9.10 on the other one. If you click at the link above and it's completely black (except for some text and some logos), it's probably because it's night (Swedish time) and they turned off the lights.
Ubuntu :: IM Messenger Supports Webcams?
Mar 5, 2010i just wanted to know is there any IM messanger that supports webcams? i mean i m using pidgin. but it doesnt support webcam ( tell me if im wrong) i like to use yahoo. facebook ( i know it doesnot provide webcam ), myspace,
View 1 Replies View RelatedUbuntu :: Program To Use To Chat And View Webcams On Yahoo
Aug 3, 2010I have it installed on a HP mini 1010NR It worked great once I got help to figure out how to make my wifi work. Now I am trying to find the best program to use to chat and view webcams on yahoo I used gyache at first but got sick of it gliching and booting me telling me people were online when they were not. So I tried Kopete and like it but cant get the webcam to work every thing works just fine I cant send invites and cant receive images. At first I was getting an error message telling me to go to a nonexistent site for help. Now it just tells me No "webcam image received" and just strait up does not send invites. I am trying to get this to work or be directed to a better program that meets my needs and how to set it up.
View 2 Replies View RelatedUbuntu :: Usb Webcams Work Fine In Cheese But Not In Skype?
Nov 4, 2010I wonder if someone might be able to help with a webcam problem I'm having (or point me in the direction of a previous thread on the subject?). I'm trying Xubuntu on my wife's elderly Dell Inspiron 1100 laptop. It's working beautifully for the most part. But I've tried two different usb webcams, both of which are recognized by Cheese but don't work in Skype.
In Skype, what happens is that Skype is aware that a webcam is present. It does NOT say "no webcam detected". But in Skype Options, when I visit the Options for "Video Devices", and click on the "Test" button to test the webcam, nothing happens at all.
And when I make a test video call to a friend, with video turned on, all the friend sees is a black screen where the image should be, and a little turning symbol presumably to indicate "please wait for image to appear". It never appears.
Fedora :: Drivers For Webcams On System?
Sep 30, 2009Is there drivers for linux for my webcam to work? I have a Creative Webcam.
View 5 Replies View RelatedFedora :: Unable Autosuspend For Laptop Webcams?
Jun 10, 2010ignore powertop's recommendation. After searching around the web, that message about how to enable autosuspend is very out of date. This thread discusses the history of the powertop suggestion, and discusses using the driver or udev to autosuspend an eeepc webcam. It also includes this nugget:
Quote:
In the mean time - the thread I linked to includes a helpful note from Xandros. They measured that enabling the camera on the 901 model cost ~3% of overall power. So autosuspending the camera won't extend your battery life that much, but every little bit helps. This page describes the user interface for dynamic power management in a device's sysfs directory. This caveat and another note from that page should be considered: 214For this reason, by default the kernel disables autosuspend (the 215power/level attribute is initialized to "on") for all devices other 216than hubs. Hubs, at least, appear to be reasonably well-behaved in 217this regard.
[Code]...
Fedora Servers :: Streaming Two Webcams Via Http?
Aug 10, 2011I've got an old laptop with F15 installed. I want to use it together with two usb-webcams to monitor my wood boiler in the basement. And I want to stream it via http. I tried zoneminder and it didn't found my cheap cams. I tried vlc but it didn't work that well. Are there any other options to put out the streams on a webpage? Sent from my Transformer TF101 using Tapatalk
View 3 Replies View RelatedSoftware :: Defining Video* With 2 Webcams In Udev?
Apr 13, 2011I have two identical webcams and I want to assign video0 and video1 to a particular one. I understand I can do this using udev but a bit stuck as being both the same they have the same attributes.
[Code]...
Debian Configuration :: Can't Bind Webcams To Exact Names
Jul 26, 2015uname
Linux cam01 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) i686 GNU/Linux
debian_version
8.0
I have three webcams and after reboot they change their /dev/videoX names from time to time.
My attempt to add .rules file to /etc/udev/rules.d was unsuccessful.
Code: Select allSUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4EE37780", SYMLINK+="video10"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4B2AC690", SYMLINK+="video11"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="HD_WebCam_HD_WebCam", SYMLINK+="video12"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4EE37780", SYMLINK+="mvideo10"
ATTRS{ID_SERIAL}=="046d_0825_4B2AC690", SYMLINK+="mvideo11"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="HD_WebCam_HD_WebCam", SYMLINK+="mvideo12"
Fedora Hardware :: Chat Programs Work With Webcams In Yahoo?
Apr 19, 2011What fedora chat programs work with webcams in yahoo? The unofficial faq said empathy was a light chat program, but 140m were installed. Is that the right amount for empathy chat? What other webcam chat programs can be used with fedora?
View 4 Replies View RelatedHardware :: Using 4 Same Type Webcams At The Same Time To Stream Video/audio To UStream?
May 23, 2010Four alike webcam active on one desktop I am running:
Quote:
0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
Quote:
0.085125] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02
0.176037] Brought up 2 CPUs
0.176297] CPU0 attaching sched-domain:
[code]....
Does this meet the required 4 ports mentioned for alike cameras in the forum posting. If not, I have one of these.. Is this what they are talking about. I have just started thinking about this again and am not sure if I'm asking the right question. I don't want to go buying a bunch of hardware I can not use. So I'm hoping to look to someone here who has some experience in live streaming audio / video to one of the distribution sites.
Ubuntu Installation :: E - Type 'usage:' Is Not Known On Line 54 In Source List /etc/apt/sources.list
Jan 23, 2010Ive seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
Ubuntu Installation :: E: Type Sudo Is Not Known On Line 55 In Source List /etc/apt/sources.list
Mar 12, 2010I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
Ubuntu :: E - Malformed Line 57 In Source List /etc/apt/sources.list - Dist Parse
Jun 25, 2010I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
Ubuntu :: Error: E: Type 'sudo' Is Not Known On Line 52 In Source List /etc/apt/sources.list
May 4, 2011don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
Ubuntu :: Clean Up Bootloader Menu List - Remove Ones Don't Want To Show On List
Jun 17, 2010All I want is for my bootloader to show "Ubuntu" & "Windows XP" which are the only 2 OS's I have installed (dual booting). At the moment it shows Windows XP, Ubuntu, Ubuntu recovery mode & like 2 more.. which are also Ubuntu & recovery mode. I've never selected the other Ubuntu ones, only the first one. So, how can I remove the ones I don't want to show on the list.
View 2 Replies View RelatedUbuntu :: Malformed Line 59 In Source List Etc/apt/sources.list?
Sep 1, 2011There is a problem with my source list (apparently) I'm running 11.04 if that helps.When I try to use apt-get install update for example, I get: "Malformed line 59 in source list etc/apt/sources.list"The same error occurs when trying to access synaptic package manager, it tells me there is a malformed line and the list of sources cannot be read.This error prevents me from apt-getting anything, updating and i suspect it is affecting the software center too.
View 6 Replies View RelatedGeneral :: Bash - Shell Utils: Convert A List Of Hex To List Of Decimals?
Dec 27, 2010How can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
Programming :: List 4 Names From Users List And Output Them To Fbusers In Numbered Ascending Order?
Feb 2, 2010How would I list 4 users ID numbered 10, 11, 12 and 13 from my users list and output them to a file busers where their names are numbered by ascending order? How would I accomplish that on a one line command?
View 4 Replies View RelatedProgramming :: Downloading A List Of Files From A Remote Server Using A List?
Feb 10, 2009I am trying to get this script to work. The purpose is to download a list of modules from the slax.org the list consist of a list of module numbers. What I am trying to do is Download the file or the file name corresponding to the number in the list.the list is comma delimited. this is what I have done so far and I am a stand still.
#!/bin/sh
# Wget script to retrieve modules from slax.org modules
#
# ----Begin of user defined values -----
# Path to wget
[code].....
Fedora :: Repository List And List Of Installed Applications?
Feb 17, 2010I understand there is a file that stores the repositories' information, but I can't find it!Is there a way I can create a list of what applications have been installed?The idea is that if I am running a backup, finding a way to save the repository list and applications installed so if I am upgrading, or fixing a borked system by re-installing Fedora, I could copy the repo list back, and run the applications list like ode:yum install <cat apps.txt?> and get all of the applications I've installed via Yum without having to remember them all?Is there anything else, outside of /home, I should look at backing up? SELinux settings?
View 6 Replies View RelatedNetworking :: Samba Read List And Write List
Mar 12, 2011I am working for a community where several people are engaged for 4 different development projects. we are planning to have a samba server to store our data.Now the problem is that I have created a share in which @groupa, @groupb and @groupc are allowed to read and write. But three of the members of @groupb are only allowed to for read permission only.
View 1 Replies View Related