I called the manufactures up and they said to call my computer manufacturer to set up the monitor. They said to set it up so that it is the second monitor and adjust the resolution to 640x480. Then I can un-connect my first monitor and use this one. I am using the nvidia driver for my nvidia graphics card. I am unsure how to set it[URL]
View 2 Replies
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
I recently installed Slackware 13.37 and every time I start X the lights on my monitor flash on and off and my monitor goes black and does not come back. I tried most of the window environments (X, Cholesterol-free, etc) and I'm running out of ideas.
View 14 Replies View RelatedI'm having this problem with a older ibm thinkcentre with some:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)
video controller in it.
The problem is the monitor connected has to stay on all the time, but something keeps shutting down the video card then the machine has been idle for some time, and the monitor goes "No video signal" until someone touches the mouse or keyboard.
The system is the newst updated 9.10, and ive set "Put monitor to sleep = never" in the power management settings. Ive also disabled the screen saver.
Now, i dont think its Xorg that shut the video card down, i believe its the framebuffer (or kernel console or whatever its called). If i jump to the console with ctrl-alt + F1, log in and turn off Xorg with lets say sudo service gdm stop, the video card still turns off after like 15-20 minutes.
Other things ive tried:
completely disabling framebuffer in the grub configuration (with vga=normal and nofb and even combining both, this however doesn't really disable the high resolution framebuffer at all. Its still on now matter how much i try to disable it..hmm (and the grub settings is used by grub as I'm able to set nosplash witch is effective))
and the last thing I've tried was setterm -powersave off, no luck there.
Before thinking it may be the console doing the video poweroff, I tried disabling DPMS in Xorg config, (and disabling it with xset) this dosent help, although i'm able to turn on the video signal again from a ssh session with xset -dpms -display :0.0 or xset dpms force on -display :0.0. However after some idletime the video signal shutsdown again.
I'm setting up a headless unit with Xubuntu (lucid), VirtualBox and Vino. It works fine except that when I unplug the monitor and reboot I can't connect via VNC. I can ssh in just fine. If I try to plug in a monitor to see the display I get no signal. My assumption is that Ubuntu detected no monitor and decided to ask me something or act differently.
View 3 Replies View RelatedI've installed Linux suse 11.3 on my laptop, but the monitor doesn't work. my laptop is a VAIO one and it's graphic card is NVIDIA GEFORCE 310m, so
what should i do?
Two days ago I switch from Arch Linux to CentOS. Everything is working as it should; except that I can't get my second monitor to work. I use two monitors (VGA: LG-W2241S, DVI: ACER-AL1906) connected to one video card (GeForce 7300 SE).
[Code]....
I am on kubuntu 9.10 x86_64
I just got my new video card: nvidia 9500 GT to setup dual monitors.
The video card has 2 dvi output to support dual monitors
Monitor 1 is connect to dvi
Monitor 2 is connect to dvi using a vga adaptor
I can't seem to get dual monitor to work?
From system settings -> monitor, i see 2 vid outputs one is DVI0, the other is VGA2. what's odd is i can set up different screen resolution for each monitor, but I only see one desktop, both monitors show the same desktop.
How do i get each monitor to show it's own desktop?
Before ubuntu can even boot I get this on my monitor Out of range set to 1280x1080 60Hz I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
View 1 Replies View RelatedI am almost tempted to go back to an old slackware to try this. Anyway, I found a circuit (with just a few resistors) that allows vga output to go to composite input. To my amazement it actually works and it is very clear, but has a double screen. I am told, to fix it you need to change the horizontal sync and or refresh rate for the card. (17 instead of 35). How would I do this in xorg.conf?
View 2 Replies View RelatedI have just upgraded from Fedora 11 to Fedora 13 and now can't get my two monitors working as a single "screen" (it worked under F11). I have a GeForce video card with two monitor outputs
lspci -v
01:05.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device 1acc:0846
Flags: 66MHz, medium devsel, IRQ 16
[code]...
I then edit the xorg.conf to change the driver from nouveau to nv and I can start X and the LCD displays the desktop at a resolution of 1680x1050 (good) but the CRT just displays random blocks of colour. At this point I also get a kernel crash - see dmesg output attached, but the system is then OK to use. I have tried editing the xorg.conf to add a second monitor and a virtual screen resolution to match the two monitors (1024x768 + 1680x1050) combined (2704x1050) but still only the LCD monitor works, but with the virtual desktop that can be nudged around with the mouse. I would like to get back to using both monitors with a virtual screen across the two monitors.
I am using Open Suse 11.2 on my HP DV6 notebook. I am connecting my television to the notebook with a HDMI cable and the television is unable to find any signal. Am I missing anything here? Shouldn't it be simply connecting the HDMI cable finding the source channel on the television and then I get sound and picture..
View 3 Replies View RelatedWhen you need to change something on the server you can hook up a monitor and a keyboard and do it through the console.
I would like to hook up an external monitor in this fashion for a desktop. The current video card can only support a single display. So I was hoping there was someway to use a second monitor as just a permanent console since simple text shouldn't require a video card?
I have a Intel DQ35JOE motherboard with integrated video (DVI and VGA). I've been running Ubuntu 8.10 for at least a year with both monitors working fine. One is a Hanns-G 27.5 inch, the other (VGA) is an older AOC 19". They were both plugged into the motherboard video plugs (it had both), and they worked side-by-side (not mirrored) just fine on 8.10.Last night I decided to go ahead and take the plunge and upgrade to the latest, because I run 9.10 on my laptop and love a lot of the new stuff. The reason I hadn't upgraded was because I feared the potential problems - which I ran into head-on this time.
Upgrade to 9.04 seemed to go fine. Then I immediately did the upgrade to 9.10. Unfortunately, my screens came up upside down and backwards. And the mouse moved the wrong way. And to click on something in the top left of the screen, I had to have my mouse on the bottom right of the screen.Well, I also received a warning that my primary hard disk was failing. So, I decided to just do a clean install of 9.10 on a new disk that I had handy - hoping it would be better if it was a clean install rather than an upgrade.
Now I can't get dual monitor to work at all, and Ubuntu seems to not recognize my monitors. If I just plug one monitor in, it works. But it won't let me adjust resolution above 1280x1024 (my big one is 1920x1200). And it says "unknown" instead of identifying the monitor.Also - at one point both monitors were appearing (but "unknown"), but mirrored, and whenever I uncheck "mirror screens" and click apply, the screen just goes black with a frozen cursor - and I can't even do CTRL-ALT-F6 to get to a terminal - it just freezes the whole computer.
I am experiencing a strange problem. I have two vga monitors and a ATI Radeon HD 3300 embedded on my motherboard. My embedded graphics card has a vga and dvi output. When I plug my monitors in (one uses a dvi to vga dongle) only the one with out the dongle gets a signal. I can swap which monitor uses the dongle and still only the one that does not use the dongle gets a signal (both monitors work, only if they are not using a dongle). Both Ubuntu and Windows are having trouble displaying video, but no trouble detecting the monitors (display settings show both monitors but do not tell me good resolutions for them). My friend has a different dvi to vga dongle, his only has about half of the dvi pins while mine has all the pins. Could the problem be that my dongle has all the dvi pins
View 5 Replies View RelatedSuppose i'm this guy right there:[URL]..And all i'm used to seeing is this:[URL]..And clearly NOT this:[URL].. And my technical expertise dates back to early eighties, a few lines of x86 assembly and a few lines of C. And i haven't written a single line ever since (got bloody rich since win 3.1 shipped).
How can i get my gorgeous (20" portrait 30" 20" portrait) setup workin'? Just like in ol' good win xp - each monitor is handled like a separate entity not merged together in one big screen? A step-by-step guide would be perfect!
Both v-cards are ATI, supposedly working from the same drivers. I don't mind using a different linux distribution, if it makes matters any easier.
Last night I was able to set up my server so that I can just connect vnc. I even was able to be connected at the log on screen so I could select which user I wanted to log in at. For some reason today, I have to have the monitor plugged in all the until the logon screen comes up before vnc will connect. Once the logon screen is up, I then can connect via vnc & select which user I want to logon as. It's odd because it worked last nigh, but today - Nope nada, it doesn't work & I can't explain why. I did clean up - Removing some applications I don't need on my server. (I'm hoping that isn't the problem) It's odd as well because I don't have to be logged on as a user to connect via vnc, I just have to wait until the logon screen is available...Then I can unplugged the monitor & logon.
View 1 Replies View RelatedBefore ubuntu can even boot I get this on my monitor
Out of range Please set to 1280x1080 @ 60Hz
I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
I have recently installed Ubuntu 11.04 on my PC with these configuration:CPU: AMD Athlon 7750 Black EditionRAM: 2GB 1066 MHzVGA: ATI Radeon HD 3200 (on AMD 780G)After I installed Natty Narwhal I felt that my CPU runs at the highest clock all the time (2.7GHz), even if I don't have any program run. I tried all settings for AMD Cool'n'Quiet from mainboard BIOS, but nothing's changed. I installed "CPU Frequency Scaling Monitor" to manually change CPU clock. It recognizes two clock for my CPU, 2.7GHz and 1.35Ghz plus 4 other options; Conservative, Ondemand, Performance and Powersave but the CPU indicator doesn't change on every option!
View 9 Replies View RelatedI have 3 monitors and two video cards. In my ATI HD 6750 I have the DVI going to monitor one and the VGA for that card going to monitor 2.
[burnyd@dynamips ~]$ lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
The second card (Nvidia GT218) I have the DVI connection going to monitor three Monitor one and two for the ATI work perfect but I cannot get monitor three which is connected to the nvidia gt218 to work properly. I tried editing my own xorg.conf file but that did not work, I have a windows 7 install on this box that works properly. I cant seem to make this work with the third monitor and the nvidia video card.
9.10 Problem with Graphics/3D and other I have a Thinkpad T42, 1.7GHz, 1Gb Ram and a Radeon 7500 Graphics card. Everything that I am having trouble with works just fine in Ubuntu 9.04(except for the sound). There are two problems that I think are linked or really the same. First off, When I turn off Compiz(Compiz works by default) then gnome-system-monitor does not work properly. At least the graphics side of it; the window appears black with random lines running threw it. The same thing will happen to Gnome-do if Compiz is off.
The second problem is getting 3d support to work. I installed and tried to run blender and I got this from the terminal:
[Code]...
Then it ether does not open or the computer locks up completely and I have to force a shutdown. Which ever one it does I do not get my desired results. When trying to do chess in 3D it tells that I have 'No Python OpenGL support'. So I install the python-opengl package from the repositories; the program now just errors on start and I had to uninstall python-opengl to get Chess to work again. I have tried all this with Compiz on and off with the same results. Anyways thats about it, unless somebody knows how to setup the sound so a program won't lock it from other, then thats all I am having trouble with.
[Code]....
I have installed Ubuntu 9.10 on my laptop Lenovo T60. The problem is i can't make extended monitor in that way: laptop 1024x768 and Monitor LG L1952HQ 1280x1024. If i make this configuration, screens appear black and i can't go back without restarting. Presently system support only: laptop 1024x768 and LG L1952HQ 800x600. This configuration (laptop 1024x768 and LG L1952HQ 1280x1024) worked well previously with the same ubuntu 9.10 before reinstallation. I guess i should reinstall ore change to other video drivers? The refresh rate is set on 60 Hz.
View 1 Replies View RelatedWhen ever I install the (recommended) drivers through the "Additional Drivers" interface to run Unity my dual monitor setup does not work. The monitors won't even detect correctly what so ever. Then, when ever I install (more basic?) nVidia drivers through the packet manager, my dual monitors work as planned, but now Unity won't work. What's the deal? Are there any work arounds for this?
View 4 Replies View RelatedPressing left, middle and right button of mouse at bottom and right edges or bottom left, top right and bottom right corners of the screen does not work with fittstool-2.0 on openbox in debian jessie with dual monitor.
Pressing left, middle and right button of mouse at top and left edges and top-left corner on the screen works correctly.
I use openbox on debian jessie. I do not install any desktop environment explicitly.
In the jessie, I installed gcc, make, libglib2.0-0, pkg-config, libcairo2-dev and libxcb1-dev.
I downloaded [URL] .... and confirmed that the sha1sum value of the downloaded file matches sha1sum value given at [URL] ....
I expanded the downloaded file by
Code: Select alltar -xvf fittstool-2.0.tar.gz
into fittstool-2.0 directory.
I executed with an ordinary (non-root) user:
Code: Select allcd fittstool-2.0
make
I executed with root privilege on the fittstool-2.0 directory
Code: Select allmake install
I executed the following with the ordinary user:
Code: Select allfittstool
and ~/.config/fittstool/fittstoolrc was generated.
I modified it as
Code: Select all[TopLeft]
LeftButton=gnome-terminal
MiddleButton=pcmanfm
RightButton=iceweasel
[Code] ....
gives:
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 408mm x 306mm
1600x1200 60.00 +
1280x1024 75.02* 60.02
1280x960 75.04 60.00
1152x864 75.00
1024x768 85.00 75.08 70.07 60.00
832x624 74.55
800x600 85.06 72.19 75.00 60.32 56.25
640x480 85.01 75.00 72.81 66.67 60.00
720x400 70.08
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.02*+
1280x960 60.00
1152x864 75.00
1024x768 75.08 70.07 60.00
800x600 72.19 75.00 60.32
640x480 75.00 72.81 60.00
720x400 70.08
DP1 disconnected (normal left inverted right x axis y axis)
I've been troubleshooting a friends computer and we've pretty well hit a brick wall. The issue at hand is the video card will not output properly. To be specific, it's an NVidia card with both DVI and VGA ports. We want it to output via the VGA and ignore the DVI because there's nothing plugged in there (the monitor we want to use doesn't support DVI). At any rate, the only time we can get the VGA to work is when we have another monitor plugged into the DVI port and dual head the system. When we do this it also adds an extra "Unknown Monitor" to the display panel. When we just use the DVI the extra "monitor" disappears. now we don't want to have monitor sitting here useless just so we can use the vga out, but there seems little else to do. We tried installing the Nvidia proprietary drivers through the software manager and yum and it failed both ways.
This is really frustrating because it seems like it should be such a simple thing but nothing works. Does anyone else have similar issues? is there something i can do to fix this? I apologize if i've not provided enough info, but ask and i'll post anything you need to diagnose.
It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies View RelatedI am running a 2.7Gh with 2G ram with an ATI X1300/1550 Radeon Card and running with dual monitors. I had the monitors functioning in Linux Mint but it was an older driver version and it was slow. I was reading about the Ubuntu Maverick 32bit and fresh installed it I have just installed Ubuntu 10.10 Maverick 32bit. Everything that I have found on here concerning ATI and fglxr has not worked.
View 7 Replies View RelatedHow can I change the default video mode for ubuntu to the lowest possible to be able to work on SD TV instead of LCD monitor?
View 1 Replies View RelatedI recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedI installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
