Hardware :: Xfce Power Manager - Message Box Opens Up With The Error?
Feb 2, 2010
I am running Slackware 13 (64 bit) and when Xfce starts up, a message box opens up with the error:
Quote:
Xfce power manager. Unable to read AC adapter status, the power manager will not work properly. Possible reasons: The AC adapter driver is not loaded, broken connection with the hardware abstract layer or the message bus daemon is not running.
dbus-daemon is running, so according to the error message the problem must be the AC adapter driver is not loaded, or broken connection with the hardware abstract layer.
View 1 Replies
ADVERTISEMENT
Oct 13, 2010
I have upgraded my EeePC from 9.10 to 10.04 and got now a black screen after I can login. On the right upper corner, I find an error message:
Quote:
Install problem!The cnfiguration defaults for GNOME Power Manager have not been installed correctly. On the bottom bar I selected English / USA / GNOME for Language / Keyboard and Session Above is the best I ever could come, but most of the time I only can type in the password, and it stops there, without bottom bar (language/keyboard/session), but with the Error.
View 9 Replies
View Related
Aug 18, 2011
error message says "configuration defaults for GNOME power manager has not been installed correctly";however, my laptop was working fine this morning. Now it does not even let me sign-in. I was attempting to install a back-up software using the "Accessories" button icon and the computer stopped working. Now it won't let me even sign-in.I use Ubuntu 10.04 and had done an update successfully (or so I thought), but what do I do now?
This message is coming to you from my desktop computer while the problem exists on the Dell laptop. Its model number is Inspiron 9300.
View 2 Replies
View Related
Apr 26, 2011
I've installed Xfce power manager via Ubuntu, but I have no idea how to use it, even after a restart still no change. I've gone through Control Center and even searching for it, but alas no sign of it anywhere.This is the command I ran via Terminal.
Code:
$ sudo apt-get install xfce4-power-manager.I'm on Natty Beta 2,
View 3 Replies
View Related
Jun 25, 2011
I'm using Slackware64 13.37 with Robby's Xfce 4.8 build on a laptop with two batteries. I've noticed that when the charge for one battery is depleted, the empty battery icon for the xfce4-power-manager panel applet is displayed as an "image missing" icon (see the attachments for screenshots of how this progresses).
Is this just down to a missing image, or is it more subtle than that? Has anyone else had the same problem, and if so how did you fix it? So far I've tried clearing the GTK+ icon cache and reinstalling the hicolor icon theme package as suggested in other threads in this forum, but nothing changed.
View 5 Replies
View Related
Aug 3, 2010
I'm running Slackware64 13.1. When I change the bright of my screen, xfce power manager show a info bar. But now it disappear, when I run xfce4-power-manager from a terminal I get this info:
Quote:
Another thing, Slackware don't have cpu governors?
View 7 Replies
View Related
May 9, 2011
Always when i attempt to download any software, an error message opens stating that adobe 8 cannot read it. when saved in downloads clicking open does not function and i cant find an uninstall for the adobe reader 8. I cannot get any anit-virus protection, problem compounded by having no cd input.
View 3 Replies
View Related
May 11, 2010
Since upgrading to 10.04 (from 9.10) 2 days ago, I have been getting an error message whenever I log in. It tells me that 'Power manager is still running' and gives me options of 'logout anyway' or 'cancel' (I'm writing this from memory, so may have got the wording slightly wrong). Clicking 'logout anyway', then continues with the login process, with no further problems (as an aside, I am running a desktop, so I'm not sure that Power Manager has much to do anyway.
View 9 Replies
View Related
May 20, 2010
I use Slackware 13.0 with the 2.6.33.2 kernel, and I use GnomeSlackbuild.I tried to get help on their discussion group, but I didn't get any.I'm trying to build gnome-power-manager 2.30, because it uses the new upower interface (so it seems). I have GTK+ 2.18.9.
View 3 Replies
View Related
Jun 23, 2010
I've tried to research my issue as best I can before posting here. System is 10.4 32bit on Acer Aspire 5720. Here's the chain of events: First noticed Firefox couldn't create a file under /tmp to download Virtualbox. Hm. Try to reload Firefox, it won't restart; freezes with one tab open, blank with transparent square in top-left, not a chrome loaded if I remember right. Both latest stable and Dev Preview. Maybe a reboot will work...Normal Ubuntu loading screen appears, but before anything else a message box appears near top right of screen: Quote:
Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. contact your computer administrator. Shortly after, an abnormally styled pop-up appears asking me for my default keyring password - seemingly skipping the account login step. When I put in the keyring and click 'Ok', the button stays pressed down and the system hangs. Have to switch off. Boot into recovery mode, root with networking. I read somewhere that "dpkg --configure -a" followed by "apt-get -f install" might help. However, "dpkg --configure -a" fails thusly:
[Code]...
View 3 Replies
View Related
Jan 11, 2010
I am helping a friend (remotely) and she has a problem on the laptop which prevents doing any updates. The error message is Could not initialise the package information An unresolvable problem occurred while initialising the package information. Please report this bug for the 'update-manager' package and try to include the following error message:
'E:Encountered a section with no Package: header, E: Problem with MergeList /var/lib/apt/lists/gb.archive.ubuntu.com_ubuntu_dists_jaunty-updates_restricted_binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
[Code]..
View 3 Replies
View Related
Jun 4, 2010
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
View 2 Replies
View Related
Jul 22, 2011
Because Ubuntu 11.04 is a bit heavy for the capabilities of my older desktop hardware, I am in the process of switching over to Xubuntu 11.04 going forward. I found the "sleep inhibit applet" very useful when I was using the Gnome DE, and was searching for a replacement in XFCE that doesn't require installing a bunch of Gnome libraries. I found a description of "caffeine" as a utility that seems to be what I'm looking for, but when I added the caffeine ppa to my repositories, and select it for installation in Synaptic, it wants to add a long list of Gnome-related components. Is there any quick way to temporarily disable the screensaver and power management functions in XCFE that doesn't depend on Gnome?
View 5 Replies
View Related
Feb 26, 2010
When I start my system, a package manager window(like if i were installing a deb) opens.
View 3 Replies
View Related
Jun 23, 2011
Following a discussion on the Asus forum on overheating, [URL] , I find that my netbook is running three power managers simultaneously: gnome, xfce and jupiter. How do I disable (not uninstall) these one by one, so that I can identify the most efficient manager by elimination? Back story: my observation posted in the Asus forum was that Lucid runs several degrees hotter than XP on my 1005HA machine, which is a dual boot.
View 4 Replies
View Related
Feb 7, 2016
On a fresh install of Debian 8 with XFCE (with a NVIDIA GeForce 210 according to lspci, and a P7P55D Asus mainboard), I just added a second monitor. This second monitor does not switches off even though the first one does due to the Screensaver Preferences → Advanced → Off After 3 minutes.
The new screen is a HP Pavilion 25xw plugged in using a HDMI cord.
The old screen is a Philips 190S plugged in using a VGA cord.
The new screen (HP on HDMI) only goes blank when the old one (Philips VGA) turns off.
Two tests:
- on the same machine, I also have Windows XP: both screens turns off at the same time with the power management.
- I tried on Debian: Code: Select allsleep 5 && xrandr --output HDMI-1 –off
It turns off the second monitor, so I know that it is possible to turn it off from my Debian.
How to set up the system so that both monitors power off when the machine is not used?
View 3 Replies
View Related
Jul 18, 2010
"s" doesn't work it just opens Power button..
View 9 Replies
View Related
Feb 27, 2010
Starting File Manager opens up a million and one times in FC12
Is there a way to stop it?
View 3 Replies
View Related
Apr 11, 2011
Yesterday when I went to boot my netbook "Dell Mini 9" into ubuntu, I got an error of. Install Problem! Gnome power manager. I've tryed the following Code: sudo apt-get remove gnome-power-manager --purge Then Code: sudo apt-get install gnome-power-manger but did not work, is there anything which I can do, and can still keep all my files, as I've got impotent course work on there.
View 1 Replies
View Related
Mar 4, 2010
Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
View 3 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Jul 8, 2015
I'm not using one atm, tried "exec startxfce4" in my .xinitrc but didn't work.
System is Debian Stretch.
View 4 Replies
View Related
Jan 1, 2016
Since update-manager was removed from Debian Jessie, I am looking for something similar or a way to install update-manager for 8.2. I would like a GUI.
I have tried gnome-packagekit, but some of the commands don't appear to work or it seems incomplete and I don't know of a way to test to make sure that it is working.
Other sites recommended to use smartpm. However, I cannot seem to find the plugin xfce4-smartpm-plugin in [Xfce Goodies] that would work as a notifier.
Unattended-upgrades does not meet my specifications, because to my knowledge there is no GUI configuration for this.
Though Debian Jessie is a great distro, I am finding it difficult to recommend to some newer users because it does lack a GUI updater/notifier at this time.
View 5 Replies
View Related
Jul 22, 2011
I recently decided to install xfce-desktop as a fallback alternative whenever Gnome 3 has problems. Now I have the Thunar file manager opening up by default even when logged into Gnome (for example when using Alt-F2 and typing in a folder name, or when plugging in an iPod.) I've searched around for days but can't find any place to set a default file manager. The Default Applications dialogue doesn't include file manager, only web browser, video etc.)
View 2 Replies
View Related
Apr 15, 2011
Is it possible to install a different windows manager? Currently I am using an HP Netbook 210. The windows manager I am using is "gnome-shell" that comes as default with Fedora 15. However, I am wondering if I could completely remove this and install a different windows manager, such as Xfce 4.8. I am not talking about completely removing Fedora 15 and then installing Fedora 15 xfce spin. Just the window manager. How easy would it be to remove the gnome-shell windows manager and then install xfce 4.8 windows manager? Any steps to do this?
View 2 Replies
View Related
Mar 22, 2010
I just had a power cut whilst installing updates on my laptop (which dosen't have a battery)
When i try to use update manager or synaptic now i get this message:
When i do sudo dpkg --configure -a this is what i get:
View 7 Replies
View Related
Apr 25, 2010
I am having issues with Gnome Power Manager. My wife and I have identical computers, with Linux Mint 8 installed on both. My Linux Mint 8 is a fresh install, whereas her's was an upgrade. Anyway, when I click suspend or hibernate nothing happens, not even an error. On my wife's computer this works just fine. sudo pm-hibernate, sudo pm-suspend, and sudo /etc/acpi/hibernate.sh do absolutely nothing.
[Code]...
View 3 Replies
View Related
