I am trying to install Ubuntu Desktop 9.10 on a System using a Radeon HD based graphics card with HDMI output connected to a HUGE TV. The Ubuntu installer does not appear to support this setup.
View 1 Replies
I am trying to install Ubuntu Desktop 9.10 on a System using a Radeon HD based graphics card with HDMI output connected to a HUGE TV.
The Ubuntu installer does not appear to support this setup.
After preupgrade downloads install media and reboots to start install, I get a dirty file systems error on /dev/sda2, my / partition.I fsck'd sda1,2,3,4,5,6 (all clean) and rebooted, ran preupgrade again and got same error. No other disks are mounted other than internal SSD.wtf is going on here? ;-)More importantly how does one get around this error? Only half-solution I have found on the net for this problem is to set allowDirty=1 in upgrade.py and recreate install.img. Have no preupgraded before so don't want to take any more risks than necessary.Thanks for any workarounds....---------- Post added at 03:12 PM ---------- Previous post was at 08:31 AM ----------Anyone have ideas here? I'd like to avoid yum upgrading as that looks to entail more pain.Why on earth does Anaconda see my /dev/sda2 on "/" as dirty when fsck reports it as clean
View 1 Replies View RelatedThis is a curiosity of mine, and I expect a technical answer, if someone knows it. Why the systems become so irresponsive when doing hard-disk input and output? This happens even if writing is done to a secondary disk where neither the system or the swap are stored.
View 7 Replies View Relatedi have installed ubuntu today and i am enjoying it so far but there is still some problems am having i will explain from the start ,,,i have a hp laptop it has 1 hard disk c,d the d am not planing to mess with it because it has the hp recovery and it might be helpful one day ,,,,so i downloaded ubuntu to an external hard disk then when i was installing it i selected it to be installed on C i thought it would automatically delete vista but it didn't when the restarted the computer i saw 2 options vista and ubuntu so i was wondering if anyone can tell me how do i delete the vista and keep only 1 operation system and btw i have no CD or DVD or floppy available so i cant download it on a cd then format c and install ubuntu again so i need away to delete vista from c while keeping ubuntu in c
View 5 Replies View RelatedIm using it in an attempt to backup all of the files off of my dead Windows xp Computer. Right now I am using the 9.10 live disk of Ubuntu and cannot get the program to recognize what kind of file system my internal hard drive is using. (A western digital 320 GB hard drive with partition 1 in NTFS and part2 in FAT32) I would like to be able to back up this drive onto my 1 TB Western Digital external hard drive that is also in ntfs.
Now here comes the wierd part, it won't read or recognize my interal and external hard drives that run those file systems but it will recognize and allow me to read, edit, and access all of the ntfs hard drives on my home network. I did some lurking and tried a tutorial for creating a mount point and on how to force mount a disk, but neither of my disks would show up in Places/Computer. So then I checked the /etc/fstab file and is says,
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
Which I think means that it says I have no hard drives installed or connected to the computer. Yet when I go into Disk Utility it tells me the disk is there and asks if I want to format the disk into ntfs...
Adobe Air 2.0 has finally been released, has anyone tried it? It's supposed to support 64 bit systems now, but I still can't get it to work! When I download the .deb from Adobe's site I get a wrong architecture error message when I try to open it, and there doesn't seem to be a 64 bit version that I can find. When I go to BBC IPlayer it goes through all the instalation steps and I got Adobe Air and BBC Iplayer listed under Accesories in my list of programs. However when I tried to open BBC IPlayer it worked normally for about 10-15 seconds and then vanished for no apparent reason. I rebooted and now Air and IPlayer do not appear on the list of programs, although if I try and dowload a programme from the IPlayer website I get the IPlayer desktop up and working for about 10-15 seconds until it inexplicably vanishes again.
View 5 Replies View RelatedI've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
MythTV Records fine but will not play the recorded shows and I can not watch or open the TV. Running Ubuntu 10.04 LTS lucid Runing a pcHDTV HD-5500 Video card Using on Board Video from an Asus M3A78-EM with onboard ATI Radeoon 3200
dmesg | grep DVB
[ 14.461244] cx88[0]/2: cx2388x based DVB/ATSC card
[ 14.771709] DVB: registering new adapter (cx88[0])
[ 14.771711] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend). My symptoms are as follows: I can do a manual scan
[Code]...
I am currently using ubuntu 9.04 and I am planning to have a dual boot my system with fedora 12. My computer is quite old and I have RAM of 256 MB DIMM 266 MHZ with pentium 4 processor. So will the dual operating systems work in my computer??
View 2 Replies View RelatedI'm running Ubuntu 10.04 in a Dell XPS M1330 laptop with Intel gma X3100 integrated graphics. I occasionally use it for watching movies in an LCD TV, however when I connect it I can get it to output video fine, but audio is a no go, when I select hdmi audio in the sound options I get no sound.
View 1 Replies View RelatedI'm having problem to get my sound work on my HTPC based on Asus AT5IONT-I Deluxe motherboard. I can get analogue sound out but not the digital sound on HDMI nor optical. I have tried a couple of things I've found on swedish forums, but nothing have worked so I'm ready to start over again from the beginning. I'm a real beginner when it comes to Ubuntu so step by step instructions is preferred. code...
View 2 Replies View RelatedFor the benefit of all other users i am specifying the steps i followed to get HDMI audio to work after a lot of toil.
Laptop configuration: Acer 5738 Ubuntu (10.04) Lucid Lynx
visit the link [URL] and read specifically the HDMI Audio section. Don't worry if you are unable to test for the sound. Connect the HDMI cable from the laptop to your LCD tv. This should be trivial. Make sure you switch your TV to HDMI input from its menu options. After enabling the HDMI configurations on your laptop using Step 1. Click on System--> Preferences --> Sound. Click on the Hardware tab. By default it might be set to Analog Stereo Duplex. Go to Output tab. Change the Connector drop down from Analog Speakers to Analog Headphones. Go back to Hardware tab and select Digital Stereo (HDMI) Output. Function+F5 would direct the video output to your TV. Incase you have a problem redirecting your video output to the TV. Restart your machine with the HDMI cable connected to your TV. With the configurations you would be able to hear sound from your TV. Have a blast! I have tried this with Acer 5738 it might work with other Laptop configurations as well.
I'm running Ubuntu 10.10 with an EVGA nForce 730i Intel mobo with onboard HDMI. Video output works. Audio output does not. I'm trying to output both to a Samsung HDTV.
I tried booting to a bootable drive with Ubuntu 11.04, and no audio.
I've essentially tried everything in every other thread. I'm using alsa mixer, I've muted S/PDIF, my settings all have HDMI output selected.
sudo modprobe snd-hda-codec-nvhdmi results in:
Code:
aplay -l results in:
Code:
aplay -L results in:
Code:
Also tried aplay -D to play a .wav, and heard no sound, but also encountered no errors.
For the benefit of all other users i am specifying the steps i followed to get HDMI audio to work after a lot of toil.
Laptop configuration: Acer 5738
Ubuntu (10.04) Lucid Lynx
[code].....
i found a tutorial to auto-mount ntfs drivers at kubuntu start
[URL]
but i can't find the K menu > System Settings > Advanced Tab > Disk & File Systems menu.it disappeared in kubuntu 9.10?
I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.
As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.
I have Gateway P-7807u laptop with Ubuntu 9.10 installed, it has HDMI output and I use it to connect to my TV-set. The problem is - not working sound via HDMI, in sound preferences I've chosen duplex digital output, but no success, but picture works well.
View 14 Replies View RelatedI'm triying to connect my computer to my tv and im trying with the HDMI. I connected the cable to the computer and to the tv and it all worked fine. But when i click on my tv the HDMI 1, nothing shows?
View 1 Replies View RelatedI am having trouble getting sound to work through hdmi, I changed the device in the kde settings for multimedia and it now works in Amarok but Mplayer and VLC are refusing.
This is the error i am getting with mplayer:
I have disabled my sound card in the bios to save confusion (on my part) Upgraded my kernel to 2.6.37. My gfx card is a NV gt 430 xt
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
I've seen this problem on dozens of different forums but I haven't found anybody with my specific problem or a solution that has worked. I have an nVidia GeForce 8400GS which I just installed in my Debian box and I can't get the HDMI audio to work. Kernel version is 2.6.32-5-amd64, nvidia driver version is 260.19.36, alsa version is 1.0.21. Output of lsmod shows that nvidia module is loaded. Output of aplay -l code...
I feel like I've looked everywhere on the internet for a solution to this and I just can't find one. It seems that everybody is able to see their nVidia audio device using aplay -l and then the solution goes from there.
I just purchased a new notebook, namely an HP Pavilion dv6, with a GeForce GT 230M. Also, I have a neat 1920x1200 display with an HDMI connector, which fits nicely with the corresponding outlet on the computer. Now I'd like the external display to be the main display when connected, with the internal display as an expansion to the desktop, and the internal display should, obviously, be primary when on its own.
The reality looks quite different: Not too surprising, with the default drivers I got only a 800x600 resolution, but with the correct drivers installed, I got the full resolution on the integrated display. My external HDMI-display, however, is dead. With the xorg.conf file being obsolete I can't really use the configuration app by nvidia, can I?
I just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
2560 2608 2640 2720 hborder 0
1440 1443 1448 1481 vborder 0
+hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
I occasionally use a DisplayPort->HDMI cable to connect my laptop to my AV-Receiver, however I only get the picture to the AV-Receiver, but no sound. I read that not all DisplayPort->HDMI cables support sound, so I tested Windows7 on the same machine and it transmitted sound over that cable just fine. So I conclude that it is a Linux driver problem.
So I generally wonder whether this can be made to work easily or not. Does anyone here have experiences with this topic, especially with nvidia graphics cards managing the display port? (I did find older posts about HDMI audio, but they were all concerned with ATI graphics.)
pavucontrol / phonon do list a "High Definition Audio Controller Digital Stereo (HDMI)"-device, but sending sound to it does not do a thing. Furthermore, my dell laptop only has a displayport, but no HDMI connector.
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
Can I install two ubuntus on one pc using different partitions?
View 9 Replies View RelatedHere is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
i want to connect my laptop to the lcd using hdmiI have nvidia video card 9200 gs and the driver is installedafter connecting both together nothing happens!do i have to change anything in the system or display settings?
View 8 Replies View RelatedI realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
