I formatted a 500GB with ext4 format, and placed in a usb box, it showed up, but could not write, copy past etc to it, the same disk was formatted in NTFS, and FAT32 showed up and could do all the above actions, given that ext4/ext4/ext2 are specifically made for Linux, then why on earth they don't get mounted automatically and work normally from usb box and ports?
View 9 RepliesIs there anyway I can recover my files that used to be on a FAT partition which I recently formatted to ext4?
View 2 Replies View Relatedhow to boot Ubuntu from USB flash drive that is formatted ext4?That is, making a portable ubuntu. But not merely a LiveUSB created using the 'Universal USB Installer' or 'UNetbootin' because the LiveUSBs created using these applications are formatted in FAT32 and uses a persistent partition just to save the changes and files.If I have your attention, what we want to achieve is a portable and bootable Ubuntu in a flash drive that is formatted in ext4.
View 9 Replies View RelatedLast night I made the mistake of formatting my media drive. Before the format, it was ext4. then I formatted it to ext4 again because I wasn't paying attention to what I was doing(this mistake only gets made once). Now im looking for away to recover any/all of my data. The drive in question is 1tb. I have not written any new files to this drive.
View 5 Replies View RelatedOS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
How can i detect if my disk is formatted as gpt or mbr?I suppose in principle this could be done by somehow reading a few bytes (no more than say 10K) from the beginning and possibly the end of the disk? But there surely is a program around that does exactly this, maybe some variation of or argument to fdisk or grub?
View 4 Replies View RelatedI've been at this for a few hours now. Searched the forums and while I found many similar topics, none were quite the same. The most obvious difference to me is this line: Jun 12 15:43:05 G1093 kernel: sdc: unknown partition table
Running CentOS 5.4
Installed hfsutils-3.2.6-7.2.2
[root@G1093 ~]# modprobe hfsplus
[code]....
I have just formatted an external USB disk with a JFS filesystem. The partition shows up in 'Computer', and it mounts, but if I try and copy and files onto it, it will not do it. Clearly, Nautilus is mounting it read-only. How do I get this to behave like my USB Flash drive, where I plug it in, and its automatically mounted read/write?
View 12 Replies View Relatedwithin the last 24 hours I have lost a reiser formatted disk. It is not visible not with df or fdisk.Which tools do you normally use in a situation like that.
Disk /dev/sda: 40.0 Gb, 40020664320 byte
255 heads, 63 sectors/track, 4865 cylinders
Units = cylindre of 16065 * 512 = 8225280 bytes
[code]....
I was using the disk utility on Ubuntu 10.04 and wanted to make by 500GB external NTFS formatted USB drive into 1 x 50GB FAT32 and 1 x 450GB NTFS. I clicked the option that said format or create a partition and it basically wiped the whole thing in a split second leaving me with 500GB of seemingly empty space. Obviously the files are still there but I cannot boot the drive to view anything. I have downloaded testdisk, but don't know how to use it, but I am sure there is a relatively simple solution here. I am currently repairing the boot sector of the drive as Test Disk showed the drive as "no type" i.e. not FAT/NTFS/ext4 etc., but shows the correct amount of used space though, but I cannot view anything err go, I cannot use the undelete command as yet.
View 2 Replies View RelatedI have been upgrading Ubuntu as its new distributions are released every six months regularly since quite some time now. Is there a way I can find out which was the original installation version that I first installed after I formatted my disk. I mean as far as I remember I have been using this state of my Ubuntu since 8.04 and have been upgrading since then, but I am not sure.
View 4 Replies View RelatedI accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have second disk connected internally, and for matted to ext4, though it shows up, I cannot past to it or copy from it, it is full mounted!
View 4 Replies View RelatedI've just bought a new SSD hard drive:Kingston SSDNow V-Series SNV125-S2/128GB 2.5'' 128GB SATA/300The question is which filesystem whould you recommand and why?BTRFS vs NILFS2 or EXT4?If you choose ext4 would you enable jurnalling?I'm very close to choose Btrfs.Any experience with running any of these on your SSD?
View 7 Replies View RelatedMy computer start to .It just stop for a minute before continuing the boot
EDIT: Could this be the cause?
Log of fsck -C -R -A -a
Sun Jan 9 23:45:42 2011
[code]...
I am dual booting OpenSUSE and Windows 7 Pro x64. Each OS is installed on a separate 1Tb hard drive. One question that I have tried to Google for a solution with no success is, how do you access ext4 from Windows? Shortly after I installed OpenSUSE, my OpenSUSE hard drive "vanished" from Windows 7. aturally, I can access all my hard drives from OpenSUSE, which does support the NTFS. I am quite sure that I am not the only person who has this problem as I know that dual booting Linux and Windows is quite common.
View 8 Replies View RelatedThis weekend, I installed Debian Squeeze on my server. I've formatted all the hard disks to EXT4, and I'm using kernel version 2.6.32-686-bigmem.When I tried to install the program saidar, it surprised me why it does not show my hard drives under 'mountpoint' [URL] <-- Saidar screenshot) as I could when I ran with Debian Lenny with the same kernel, but where the hard drives were formatted in EXT3. My laptop which has Ubuntu 10.04 as OS and the hard drive is formatted in EXT4 can easily show the hard drive in saidar.
I also tried to install PHP SysInfo on the Debian computer, but it does not bother to show anything on the hard disks
I tried to check fstab file and I can see that Debian uses UUID to identify the hard drives, but I've tried to change it to something with /dev/sdx, but it did not help either.[URL] (fstab file)
I know that Debian squeeze is very new, but it would be nice if someone could give me a hint what might be wrong, because I am a little tired of all time to use 'du-hs' command To find out how much space is spent on the various drives, since the command is a little slow, since hard disks are well filled.
I tried to install ubuntu 11.04 on my external hard drive (WD My Passport, thats all i remember about the name) and all was well, until I tried to reformat it from ext4 to FAT, and no such luck, it isn't even being READ, not in fdisk -l, not by gparted, disk manager, or anything else. Windows is no help at all... I tried that out of desparation.
View 9 Replies View RelatedJust installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
Tuesday night I wanted to make a backup of my Ubuntu ext4 partition via Clonezilla so I configured that an image had to be made and it would be saved on the NTFS external disk. But it said it needed 23 hours to create a 5gb backup, so I resetted my computer as this took too long. But after this, Ubuntu nor Windows recognized my drive.
I called Seagate and they told me after troubleshooting 30 minutes, that there is no option of fixing the drive and I had to send it to RMA. What could be wrong? Clonezilla works via a bootable ISO on Debian. The disk drive is still spinning. I already rebooted the external drive, but it's not working. In Linux the disk is no longer mounted and cannot be mounted:
Code:
brw-rw---- 1 root disk 8, 16 2010-03-12 00:50 /dev/sdb
brw-rw---- 1 root disk 8, 32 2010-03-12 00:50 /dev/sdc
brw-rw---- 1 root disk 8, 48 2010-03-12 00:50 /dev/sdd
brw-rw---- 1 root disk 8, 64 2010-03-12 00:50 /dev/sde
What could have happened? Would the data still be accessible on the internal drive? Did I just loose 1.5TB data that was stored on the external disk?
I have been having problems with filesystem corruption on my eeepc 1000H for a long time now. I have tried using different filesystems, kernels and distributions (arch, slackware) to no effect. I am starting to grow suspicious that this problem lies somewhere else, as I haven't seen anyone else having similar problems in such a variety of scenarios.
I have tried testing my ram using memtest86+, didn't come up with anything after a full run through. I also have tried using e2fsck -c to check for bad blocks, it finds none. I had a go at using smartctl but wasn't really sure what I was doing. I did a long test and it came up with nothing anyway.
This problem is in addition to the problems I've been having with my intel graphics chip and KMS. A lot of the time there are lockups when booting into X, which can only be gotten out of by a hard reset. This is sometimes what causes the original filesystem errors. I've stopped messing around with KMS for now to eliminate this but my current system in unbootable. I'm guessing my disk is wrecked but have as yet seen no definitive proof. Can anyone recommend anything that I should do?
I am currently on ext4 with a custom kernel 2.6.33-rc6 (the stock kernel shipping with slackware does not have the elantech extension for psmouse included). When I was using arch, I was just using the stock kernels.
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
I got a problem booting ubuntu 10.4 RC but i solved it by replacing root partirion uuid in grub boot menu then I disapled totally uuid passing to linux from /etc/default/grub . but something else i noticed why grub choosed insmod=ext2 why not ext4 specially I use now ext4 .I tried by editing the grub boot menu replacing "insmod=ext2" by "insmod=ext4" it booted and the three lines error during booting that i used to see them science ubuntu 9.10 totally disappeared . really I dont understand can anybody explane for me.and if what i did was right ,can anybody tell me how to make grub always and permenantly detect ext4 as ext4 not as ext2.
View 6 Replies View RelatedI had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
I cannot get the Disk Utility to launch, when I click the icon the cursor rotates and stops but nothing happens.
I uninstalled and reinstalled the Disk Utility, still not working.
I have three HDDs and many partitions. I multi boot Linux, Win 7 and Win XP.
All OS's boot cleanly using EasyBCD boot loader.
It did not work in 10.04 or 10.10.
I bought 2 new 1,5TB sata disks for my server. But when I plug them in my debian gives a error message: ata2: SRST failed error -16
The debian runs from an old 500GB ide disk and a 160Gb ide disk for the home dirs.
I tried antoher cable, but that is not the problem(or is that other cable also broken...). I also tried all sata modes in bios, auto, enhanced, sata-only. I also tried booting an ubuntu 9.10 live cd. But in gparted the disks won't show up.
Is it possible that the sata controller of the motherboard is to slow.
I have a IBM x306 server with on board RAID1 controller. One of the two disk is dead, I need to replace it. I'm using the "ServRaid Manager" to reconfigure the array. I shut down the server and replaced the dead disk with new one, I first started the server and not doing anything manually - thinking that it will auto sync, but it just didn't! I then re-started the server and logged in with ServRaid Manager. Now I want to reconfigure the array so that the new disk will sync. But the problem is that in this arrays property, the "Synchronize" option is grayed out, I just cant click on it! On the other hand on the newly inserted disk's property I was able to click "re-build", but after this, things just stopped there, its not synchronizing. How do I simply replace this new disk and have things working?
View 8 Replies View Relatedi have bought a new system with ASUS M4A785TD-V EVO motherboard and AMD X4 635 processor i have installed Ubuntu UE as operating system when i boot the system a warning that no hard disk is detected appears then another warning appears stating that processor fan is not working and to press F1 to resume but the system boots on pressing F1 is there any problem with this ? is the processor fan really not working ?
View 1 Replies View Related