Hardware :: Software Mixing - Audio Chip VT1708S
Oct 19, 2010
Starting over, based on this thread: [URL] And my problem which is the same! I have the same audio chipset and experienced the same issues. I hope there is nothing about that chip. I tried with XFCE4 on Slackware 13.1 and now KDE4 on Debian, I found a workaround on XFCE by installing gstreamer and using it instead of xine as the phonon backend. That workaround apparently doesn't work on KDE.
Something interesting (also in the original thread): Software mixing through alsa DOES work since I can play several files in aplay (command line) or xine (gui standalone) simultaneously. I don't have another soundcard. Should I install pulseaudio anyway? Switching to OSS ?
View 1 Replies
ADVERTISEMENT
Jan 6, 2011
I have been using Fedora on and off for a year now, and have decided to take the full plunge and install it as my sole OS. Nearly everything works, although I was noticing some issues with the audio so I decided to install the proper drivers.
I found them here: [URL]
Before I started this process I had a detected sound card in hardware and now it is gone - how do I restore it?
how to get it I am still learning the terminal commands.
View 8 Replies
View Related
Apr 25, 2010
However, even after much trying I couldn't get my motherboard's onboard audio to output in 5.1 surround like my Windows 7 OS can. Ubuntu simply claims my card is Stereo Duplex.I tried using these drivers that I found online. The instructions didn't work one hundred percent, but after I somehow got through all the errors and compiled my new kernel I faced a command prompt interface (no graphics of any sort). I deleted my Linux partition, and installed Ubuntu 9.10 Desktop Edition 64-bit fresh.After that, I remember seeing somewhere that I should install the package "linux-backports-modules-alsa-generic meta-package" to enable 5.1 audio on my card. After installing it, the ALSA mixer had a new option at the bottom left:URL...
I checked the VIA website, and they say Smart 5.1 is a way to use the Line-out, Line-in, and Microphone ports as your three 3.5 mm outputs. This is what Windows 7 does for my surround system, and it works.Of course, I enable it and turn everything on. I try a sound test (something in the terminal, I can't remember what) and it claims it's playing noise on all my outputs one at a time. I still only hear noise on front left and front right.I try rebooting, making sure Smart 5.1 is enabled, and testing again but to no luck. I can't hear any surround sound.
View 9 Replies
View Related
Dec 23, 2010
i cant get the audio to work i am on slack 64 bit. i did run alsaconf and it sees my card. tryed turning up volume but no sound at all
View 3 Replies
View Related
Jul 5, 2010
Ok, so let me first start off by saying I'm a linux noob. I feel no shame. I've been working on trying to solve my issue for a few days now and after much research I am still no better off. But I am able to at least narrow down my problem. The long and short of it is that my HDMI audio device is not showing up in Ubuntu 10.4 x64 edition. Let me give a few specs.
Motherboard: ASROCK 785GMH/128
Onboard video: ATI Radeon HD 4200
Onboard audio: VIA VT1708S
OS: Ubuntu 10.4 x64
Alsa drivers: alsa-driver-1.0.23
ATI Drivers: ATI Catalyst 10.6
Running the latest version of ALSA and ATI's proprietary linux drivers. I can see all outputs (including the s/pdif) except the HDMI. From my reading there should be a device listed on a 2nd card called ATI HDA HDMI aplay -l returns the following result:
[Code]...
View 1 Replies
View Related
Jun 23, 2011
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies
View Related
Nov 6, 2010
Recently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
View 4 Replies
View Related
Aug 25, 2010
I read somewhere that it's not a good idea to mix the use of apt-* (eg. apt-get, apt-file, etc.) and "aptitude". I guess they're not using the same database to keep track of things.Problem is, they don't offer the same features:"apt-get safe-upgrade" doesn't exist, so have to use "aptitude safe-upgrade"."aptitude show/list mypackage" doesn't show the files that an uninstalled package (ie. still in depot) contains, so have to use "apt-file show mypackage".
View 9 Replies
View Related
Mar 6, 2010
Is LVM sensitive to mixing different drives w/different specs? If I mix IDE and SATA drives are there issues?
View 1 Replies
View Related
Jan 19, 2011
I want to both talk and play songs on my machine which will be broadcasted to an Icecast machine. Any pointers on how to pull this off?
View 3 Replies
View Related
Mar 21, 2011
I have 2x 1.5TB hard disks and I'm going to buy a new 2TB drive soon. First though I just wanted to check that I could partition off the first 1/4 to 1/3 of the 2TB drive (leaving 1.5TB or more free) and install Debian to that part, then use the remainder of the disk in combination with the 2x 1.5 TB drives in RAID 5? i.e. can you mix whole drives and with partitions from other drives in RAID 5 and/or is it best to just stick with complete drives for the RAID array?I only have room for 3 drives in the small mATX case that houses my NAS device and I want to maximise storage capacity and minimise expense.
View 2 Replies
View Related
Aug 1, 2010
Wich software are the best for music making and mixing on Linux? Something equal to Traktor or VirtualDJ on win?
View 3 Replies
View Related
Jul 21, 2010
I don't want to screw up my system, but I need newer versions of packages then the ones in the apt repos. What is the community consensus on the best way to mix apt package management with building bleeding edge packages from source?
Should I build the source into a package and install it with apt? Should I avoid make install?
I would also like to be able to use multiple versions of the same package, and have some sort of sym link or something to determine which version gets executed.
View 7 Replies
View Related
Nov 17, 2010
A while ago I reinstalled Ubuntu on my PC when I felt that Windows was about to give up. I'm glad I did. A lot of the applications I had on my Mac had equivalents on Linux, I was delighted and I haven't been needing Windows at all.
Up until recently everything was working fine, but now I think Linux is mixing up my Sound Card with my TV Tuner. When I call someone using Skype, it ends up airing white noise, however, if I've watched TV prior to that, it ends up airing the sound from whatever channel I was watching last. If I turn on the video calling function (despite the fact that I haven't got any webcam plugged in) it ends up airing video from that same channel.
It just started doing this randomly, and as I did some experiments, I discovered that it does this with all audio-input applications. (Sound Recorder etc,)
So I installed Pulseaudio device manager, and I discovered that my soundcard isn't listed under output devices.
View 2 Replies
View Related
Jan 5, 2011
This may be due to a case (non-)sensitivity issue. I have two subfolders on the mail server called "Spam" and "spam". On the mail server (Dovecot), these are directories ".INBOX.Spam" and ".INBOX.spam". The issue I am seeing is that the information shown in the index area of Evolution's window has, for some mail, information that belongs to other mail in the other folder. But when I click on that line, I see the corresponding correct email that should be in that position.
Because this happens to be spam, I just went ahead and trashed everything in one of the folders. That one action trashed everything in both folders.Is there a way to tell Evolution to dismiss everything it thinks it knows about the state of mail on the mail server and re-acquire it all? Or could this be an IMAP server issue with Dovecot?
View 1 Replies
View Related
Mar 24, 2010
I currently have a mirror raid array with 2x 1TB HD's (Western Digital Caviar Green WD10EADS SATA). They are both the standard 512 byte sector HD's. I just ordered a new 1TB Hard Drive (Western Digital Caviar Green WD10EARS SATA) as I want to wipe the current mirror raid and use the 3 disks in a raid 5 array.
But to my suprise, the new 1TB HD is an "advanced format" HD with 4k byte sectors... Am I screwed or can this 4k byte sector HD be used in a software raid 5 array along with the 512 byte sector hard drives?
(The WD hard drive says you can jumper it to work with XP which can only use 512 byte sectors... there's also a utility you can run that does something to make it compatible with XP too.... Makes me wonder if these new drives are backwards compatible?)
View 1 Replies
View Related
Jan 24, 2011
I have Ubuntu Server 8.04 (LTS) installed and running well, but there a few packages that I'd like to upgrade, without upgrading the entire system (e.g, apache2). Is it possible to include both the Hardy (8.04) and Lucid (10.04) distributions in sources.list? Is that even safe? By the same token, can I add a Maverick repo to my list? I'm using "apache2" as an example, but this is more of a general question.
How should situations like this usually be handled, when only a select few packages would profit from an upgrade that resides in a different Ubuntu release?
On a similar note, is it possible to install two different versions of the same package using the APT tools? Let's say I want two different versions of php5 -- how would I go about doing that?
View 2 Replies
View Related
Mar 23, 2010
We recently bought an i7 X58 server with 6 memory slots. Since it was cheaper, we opted to get the min memory configuration with the machine (3x1Gb) and then buy 3x4Gb separately. It seems a shame to waste the 3Gb, so I'm wondering how to "mix" the memory without sending everything into single channel mode. The information I've read is rather confusing, and often contradictory.
View 1 Replies
View Related
Apr 18, 2011
Why are the 'defense' method calls actually using the 'offense' methods.Also, is there a way to remove the commented base classes for 'Player' so that the casting isn't necessary?
Code:
#include <iostream>
class Offense
[code]...
View 1 Replies
View Related
Aug 8, 2010
How is this supposed to work out? I noticed some distros are really good about recognizing your other linux distros and some not. They keep recognizing windows, but not other linux distros. Also, I have run into a few problems when my operating systems were on different hard drives. I have my operating systems running from a small 250gb laptop hard drive with special mounting and am using my TB hard drive for internal storage /data.However, my last attempt at installing a linux partition on the TB hard drive with Windows and another linux partition on the laptop hard drive didnt work out so well. Updating grub via the command line didnt sort this out. Sudo su root Apt-get update grub (or grub update) or whatever didnt work before when I tried it.
View 4 Replies
View Related
May 26, 2011
I want to be able to open a file (support for .mp3 and .ogg a must) and add effects, change pitch and tempo, add beats (either default or midi created), mix with other songs (or clips from), be able to change levels of the high/mid/low, alter gain and frequencies ... all that fun stuff.
programs I already have are:
MixXx
LMMS (Linux MuliMedia Studio)
mhWavedit
-and-
gAlan
And it doesn't seem that any of those have the features I am looking for. I am running Zorin OS 4 (ubuntu 11.04 based) and Dreamlinux 3.5 (debian- unsure which release) on a fujitsu lifebook 5 series - S6240 (it's kinda old 2005).
View 3 Replies
View Related
Apr 28, 2010
I understand it is not generally a good idea to mix 13 and 13-current packages but I am installing OpenProj which requires JDK and the installed JRE (6-18) is up-level from 13's JRE (6-16) and back-level from the 13-current JDK (6-19). Presumably JRE and JDK should be at the same level. Would it be better to take both JRE and JDK to 13-current (6-19) or to take both to 13 (6-16)?
View 3 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
Sep 30, 2010
Is it possible to do this? I'm just thinking maybe I can run KDE without using the GPU so that I can use the GPU for computation (CUDA). The system I'm thinking of using is a laptop with Nvidia GTX260M video card. I've seen people talk about frame buffer, but I don't quite understand it because it seems that some people are talking about using frame buffer even when they have a video card on their system.
View 9 Replies
View Related
Oct 10, 2010
Is there a way to use my nvidia chip in my eee pc 1215n?
It has an integrated graphic card and a discrete card (nvidia). I don't care about battery but I'd just want to use nvidia chip.
View 9 Replies
View Related
Feb 3, 2010
I put Ubuntu 9.04 Linux on my computer a while ago and I found that my integrated graphics chip is going unrecognized. I've tried many ways to get it to "turn on" and be recognized, but nothing works
View 9 Replies
View Related
Jul 28, 2010
11.3 installation appears to be completely unusable for mission critical workit's running/freezing on a Toshiba a300 laptop, intel 965gm gfx, using the drivers that where installed by 11.3whenever the unstoppable screen/monitor saver kicks in, it freezes the machine irrecoverably.same as: 11.3 kde constant lock upsthe unstoppable screen/monitor saver has been a pain in the neck in 11.2 too, is it possible to COMPLETELY REMOVE any code that will make the gfx go on standby? what a pain when you are watching a movie! disabling everything obvious never worked! wtf?
View 5 Replies
View Related
Jul 5, 2010
I have no experience with embedded systems hardware and am looking to build a micro-budget underwater robot for exploring the bottom of a lake on the family homestead. I don't have much money to spend on this, but I want to run Debian Linux (I have lots of Linux Admin experience and am right at home with a terminal) or something like that on a small chip which needs to be able to:
Connect to the control computer via ethernet. Get digital or analog data from a GPS module, pressure sensor, etc. Control a few thrusters. Do various other hardware IO functions. Possibly control a robotic arm (this is a long shot, I know). And costs less than about 100 dollars. I have no experience with embedded systems hardware so I really don't know what to buy or where to start, aside from the fact that I heard that this would be a good place for something ARM-related. I am a software developer with time to burn as far as writing the programs to support this goes.
View 3 Replies
View Related
Apr 1, 2011
I programming a software using the FTDI chip Ft232 ,and using the D2XX driver(version 1.0.4).I already written some software in the MS Windows and the function FT_GetBitMode works , although in the Linux( Fedora 64 bits and Ubuntu 32 bits) this function returning FT_IO_ERROR (4). I already try differents different USB ports, run as root user or change the USB dev permissions.
View 1 Replies
View Related
Mar 17, 2011
I have Intel Atom based development board which has eMMC chip. I can successfully boot Fedora 11 on this board from SATA drive. However Fedora doesn't see this eMMC chip as external storage. The "fdisk -lu" command doesn't show presence of any mmc device.
View 4 Replies
View Related
