Hardware :: Screen Resolution In Compiz In Ultimate Edition?
Jul 9, 2010
I use a dual core ASUS desktop with Nvidia built in, the video card. I have 500 Gigabytes memory and the video card has 512 Megabytes. 3 Gigabytes of RAM.
I installed a Ultimate Edition Gamers released back in June 2010. I opted for the use of Compiz, and opted for Nvidia drivers from Nvidia, not the ones devised in Linux. Once I did this I got compiiz going, but with less choice of screen resolution, so it is all slightly too big. Blocky, How can I get the finer screen resolution back?
At the time of the install I had to change the resolution, that was good. Also when I installed the Nvidia drivers and compiz, the cursor changed from a spear head to an arrow.
View 1 Replies
ADVERTISEMENT
Oct 27, 2010
i am using ubuntu ultimate edition 2.7 and i want to install theme of ultimate edition 2.8. Where can i get it?
View 4 Replies
View Related
Aug 21, 2010
Wanted to get some info regarding Ultimate Edition 2.7 and see that the webpage is not active (http://ultimateedition.info) at the moment. Hostgator just says that the website is experiencing difficulties. I checked the website a couple of times today (8/21/10) and see that it's down. Here's the URL I was using: [URL] Anyway, if the project is dead, I'm open to any suggestions regarding distros with a lot of eye candy.
View 5 Replies
View Related
Aug 25, 2010
i want to download ubuntu ultimate edition theme pack,but found out that ubuntu ultimate's website is now down from quite some time,have they stopped their project?
View 1 Replies
View Related
Jun 15, 2011
Am using Ubuntu Ultimate Edition 2.8 which is build on Ubuntu 10.10 Maverick. Am using it in my laptop Toshiba Satellite c660 -p 5012 Am having no sound at all the sound hardware tab shows no sound cards But in the system hardware tab it says Intel 5 series/3400 series HD audio
View 2 Replies
View Related
Nov 4, 2010
I have installed Ubuntu 10.04. I have ultimate edition that has almost all packages. Now, i would like to install selected packages from ultimate edition. I need a to know how to install the selected packages by resolving the dependencies locally.
View 1 Replies
View Related
Aug 19, 2010
I Installed Jumblo (a voip program) through wine but it is unable to connect to internet. I don't know if it is blocked by firewall or not.
View 1 Replies
View Related
Apr 14, 2010
I would like to clone an existing desk top installation of Ubuntu Ultimate Edition and run it on my MacBook, can it work? What do I have to do to get it running there?
View 1 Replies
View Related
May 29, 2010
I recently gained Ultimate 2.6 Gamers and it is very good! New to this version, I looked for Compiz, but first found Emerald in the list. I fiddled with it, selecting options, but then the fine screen resolution went askew, so the light at the top right is out of view, and the eye candy arrow head cursor was replaced by a black and white arrow. How can I fix this, go back to default?
Using a desktop, Pentium 4 dual core, ASUS. Dell monitor. Nvidia built in graphics card, downloaded a Nvidia co. driver.
View 3 Replies
View Related
Jan 20, 2011
i just installed ubuntu server edition 10.10, install said it was successful, but instead of loading a normal login screen it takes me to a screen that says exactly this: Quote: Ubuntu 10.10 computer name ttyl computer name login: Im wondering if this is normal or did the install go wrong somewhere, and not report it and if there is a way to fix it.
View 2 Replies
View Related
Jan 17, 2010
But when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
View 3 Replies
View Related
May 13, 2010
can i install ubuntu 10.04 Netbook edition in my laptop? Is there any drawback in installing in laptop? which one is better-netbook edition or desktop edition?
View 4 Replies
View Related
Aug 27, 2011
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
View 2 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
May 1, 2010
Before I upgrade to 10.4 It would be nice to find the best solution to this problem. I use a KVM switch that dont pass the EDID info from the screen to the OS. To solve this, that is, to get the correct screen resolution, i need to pass monitor and screen info to the OS at every startup. One way is to ad a script to /etc/gdm/init/default, or in KDE /etc/kde4/kdm/Xsetup.
View 2 Replies
View Related
Jan 30, 2010
My config: PI945GZD motherboard 2 GB RAM Windows 7 UltimateMy processor supports 64 bit OS but I have not tried any. So should I download and use the 32 bit edition or the 64 bit edition.I have sound blaster 5.1(not sound blaster 5.1 live). Would it work in ubuntu?
View 3 Replies
View Related
Oct 26, 2010
I have been setting up a box now and have it configured with everything I need and is running great.I would like to test out the netbook remix edition is there a way to install the desktop environment along site with Gnome (like I use to do with KDE)Would be great so I wouldn't have to re-configure drivers and such.To be able to switch from Gnome environment to Netbook remix environment.I am running Ubuntu 10.04.
View 5 Replies
View Related
May 2, 2010
i tried to install ubuntu netbook remix edition 10.04 on my laptop HP Compaq 550 through a usb flash stick ... with the usb creator which included into the iso image i got this msg (( attached screen-shot )) .i tried another application which makes a usb bootable disk called "UNetbootin" it boots successfully but after booting every thing got FREEZED ... i tried the same thing with ubuntu 9.10 it's succeed .. but i neeed to install 10.04 .
View 8 Replies
View Related
Jul 30, 2011
I have download the following file GDM-BrazilinuxEye.tar.gz and then extracted the file, it contains a pictue in ajpg file format and GdmGreeterTheme.desktop and olho xml when I click on the GdmGreeterTheme I get asked to open to display contents or run in terminal, I have clicked run in terminal but the log in picture has not changed, what else do I have to do to change the log in screen?
On to Compiz, I am running 11.04 and would like to mess around with Compiz, I know it is installed because I have checked in the software center but I am unable to find it, so where do I look to find it.
View 5 Replies
View Related
Jul 30, 2010
I have enabled compiz on my mum's 64 bit Ubuntu desktop. It works well, but the screen dims significantly once I click the mouse button to rotate the cube. Releasing the mouse button brings the screen brightness back to normal. Is there a setting that controls the screen brightness whilst rotating the cube?
View 2 Replies
View Related
Apr 2, 2011
I usually use compiz to invert my screen, but I would like to disable compiz, so I was wondering if there was a way to invert my screen (and to be able to invert individual windows) without compiz.
View 2 Replies
View Related
Apr 29, 2010
I'm using debian lenny, my video card is an ATI x1300 series, I've installed compiz from the debian's repositories. All works fine except the next: Sometimes the windows appears out of screen, but this happens with windows related to the getfile function -for example: attach a file to an email, change the directory to download a file, seek some playlist file in "atun", etc.; so these windows appears in the top border of the screen, I can only watch the buttons "cancel" and "ok". I don't want to change the resolution every time this happens, so my question is: what should I change/edit to prevent this happen?
View 3 Replies
View Related
May 22, 2010
I finally got Ubuntu server edition 10.4 LTS installed. But After the installation my computer boots and after the BIOS screen there is a blinking cursor and then the monitor says that there is no input.I am running a Dell Optiplex SX270, no modifications.
View 8 Replies
View Related
Jan 25, 2010
I just did a clean installation of Fedora 12 on my Intel Core2 Duo system. I installed packages to use compiz fusion. When I select the Compiz Fusion Icon option from the System Tools menu, my screen goes white, and I have to SSH into the system and reboot it
View 4 Replies
View Related
Apr 29, 2010
I am trying to use screen captures in compiz but they are garbled and unusable. I am running ubuntu 9.10 on a dell latitude D520. I attached a copy of one of the screen shots.
View 1 Replies
View Related
Apr 28, 2011
I just upgraded to ubuntu 11.04.
Before, I could move windows between screens by pressen "Strg-Alt-Enter" (a shortcut I configured myself). Now that does not work anymore.
I remember configuring this shortcut somewhere in ccsm, but now I can not find it anymore.
View 5 Replies
View Related
May 22, 2011
When I recently upgraded to Natty, Compiz started acting very, very strangely. It is eating up a lot of CPU time and it's creating this huge distorted mess. I haven't quite found someone else's problem that matches mine, Works just fine with Metacity/GTK. Compiz/Emarald is unusable.
View 4 Replies
View Related
Oct 30, 2009
I followed leigh123linux' guide about the compiz fusion installation and set-up. Unfortunately, I failed to do a compiz-check before running the whole thing. I enabled compiz and did a reboot. The next time I logged in, my screen just turned white. I can still see my mouse moving though, but I couldn't disable the compiz.
View 11 Replies
View Related
Jun 9, 2010
I am using VirtualBox with Win-XP installed which works perfectly But after doing updates in my F13 today the scale wont work in the VirtualBox in full-screen mode Initially scale works when I place the mouse in the top-left corner but it's not working now and nothing happens Ive googled and tried settings in CCSM but I really have no idea why scale doest work in VirtualBox full-screen now this is really extremely inconvenient as i cant switch back to my F13 unless I switch to windows mode in my VirtualBox.
View 2 Replies
View Related
