Hardware :: Saitek Cyborg Mouse Constantly Disconnects From Udev
Feb 11, 2011
Watching dmesg and Xorg.0.log, I see that the mouse is actually disconnecting and reconnecting from the bus frequently. This causes periods of, you guessed it, non-working/dead zombie mouse. When another mouse is plugged in, it continues to work fine while the Saitek is disconnected.
I've only so far tried the mouse on two ubuntu systems (10.04, 10.10), behavior is the same.
System I'm dealing with now (Ub 10.04.1):
2.6.32
Xorg server 1.7.6
The mouse is using evdev driver and is not manually configured in xorg.conf. I thought of trying a different driver via xorg.conf, but had trouble getting the device even connected then.
Attaching snippets of the logs. Cannot post lsusb output without a reboot, can do on request.
As we speak I'm looking for a non-linux OS to try the mouse on to eliminate hardware fault.
View 1 Replies
ADVERTISEMENT
Jun 25, 2011
I have a problem with a new mouse that I just bought. I cannot get my new Cyborg R.A.T 3 mouse to run under kubuntu. I am able to control the cursor and click on items that appear in it's immediate window. Example: I can click K start icon, but I can't interact with the actual start menu once I've opened it.
View 1 Replies
View Related
Oct 4, 2010
I'm using an Acer Aspire One d250 running Netubuntu 10.04. The wireless connection to my router fails at random intervals and spends most of it's time trying to reconnect. It will occasionally ask me to input the password to the network, which is already entered in the dialog box, and clicking "connect" doesn't seem to make any difference. Also, when it is disconnected from the network, none of the other computers in the house, wired or wireless, are having any problems. If there is any more information I could provide,
View 1 Replies
View Related
May 26, 2009
Title is pretty self-explanatory. Suse 11.1 will not boot (or shutdown) past a certain point unless I constantly move the mouse around or press keys.
View 9 Replies
View Related
Jun 13, 2011
I was reading about udev. And being a newbie I am, I executed the following command rather foolishly: Code: #apt-get install udev Little did I know that this will render my mouse and keyboard not working next time I boot into Ubuntu. I booted into recovery mode and the keyboard is working fine in that mode.
View 4 Replies
View Related
Apr 12, 2011
I'm using Debian 6.0 on an Optiplex 960. My system constantly freezes. When I move the mouse (or press a key on the keyboard), my system resumes execution for approximately 2 seconds, and then freezes again. This problem is not restricted to Debian,'ve ncountered similar problems with other linux distributions on my hardware. I was wondering if anyone else had encountered this problem before, or had any ideas about how imight be resolved. I'm copying my hardware information below.CPU INFORMATION
processor: 0
vendor_id: GenuineIntel
cpu family: 6
[code]...
View 2 Replies
View Related
Oct 9, 2010
I am running a minimal debian "Squeeze" system with xfce and recently noticed a marked slowdown in my samsung nc10 netbook performance; with all other applications closed htop revealed the following process eating up cpu which explains the slowdown. Previously cpu idled at about 10%. The user is root unlike all the other processes:user:rootpu:70%
command:/usr/bin/x :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
View 2 Replies
View Related
Apr 30, 2011
I've managed to install the 32bit version on my laptop with little issue, and I'm really liking the Unity interface. There's a few issues around customisation and minor usability quirks, but from my experience with things like KDE4, I'm guessing it's only time. Anyway, I've been having major problems getting the 64bit version running with my Desktop. I have 8Gb of RAM in that, so it's not really an option to use the 32bit version. The Installer crashes constantly, but I was able to upgrade from 10.10 using update manager, but unfortunately Natty is no more stable than it's installer.
While logging in, or shortly after, the machine will crash to a text console displaying a Kernel Panic message. There's also messages indicating a problem with the CPU MCE. I've tried setting various kernel parameters at boot, such as nomce and nomodeset, these have extended the time the machine is up before crashing out, and removed the Kernel panic message, but not the crashes. I'm guessing the MCE messages were unrelated or a symptom in this case.I've done a huge amount of searching, and found no suggestions that I haven't already tried. Running Ubuntu 10.10 64 bit the system is rock solid.
View 1 Replies
View Related
Jul 3, 2011
I think I have found the problem to my Ubuntu laptop locking up, and it is most likely overheating. Is there any way to keep the CPU fan spinning at 100% constantly? I tried setting it up in the BIOS but it is an old laptop and I can't control it from there.
View 4 Replies
View Related
Aug 8, 2010
I want to know what daemon listen on *: pop3. I use
Code:
then
Code:
But in every ps command, pid of the process increment with two.
How to see the pid of that daemon/process?
View 5 Replies
View Related
Oct 30, 2015
So I'm having troublesome issues with Debian 8.2, one of them being really costly to my productivity. This issue started maybe a month or so back, and has been continuing since. Laptop is a Toshiba C50-B-14D
During every freeze all those happen:
Screen freezes (The whole display becomes frozen, with only cursor movement - Time displayed stays frozen too)No keyboard input (even Cap & Num Lock leds will not dim once pressed)Power button (pressing once will do nothing - I have to hold for an unhealthy shutdown and reboot)Touchpad Input Works (Cursor responses to movement only, clicks/change on-hover do not.) Fans become quiet
Today at 11:46, it happened while just running Chromium. At the time:
*XFCE4 Power Management Plugin
Presentation Mode [on]
Charger was connected
Here is the syslog (I know this isn't useful as it doesn't show what's causing the issue) the freeze happened at 11:46 and 11:57 is when I rebooted back into debian.
Code: Select all----------------------CUT------------------
Oct 30 08:31:01 Badook rtkit-daemon[1315]: Supervising 4 threads of 2 processes of 1 users.
Oct 30 08:31:01 Badook pulseaudio[1364]: [pulseaudio] pid.c: Daemon already running.
Oct 30 08:41:09 Badook kernel: [Â 727.002897] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Oct 30 08:42:02 Badook pulseaudio[1312]: [alsa-sink-ALC233 Analog] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write!
[Code] ....
I also started noticing an INFO rcu message during startup:
Code: Select allroot@Badook:/# cat /var/log/syslog.1 | grep -i "rcu"
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Hierarchical RCU implementation.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Â Â RCU dyntick-idle grace-period acceleration is enabled.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Â Â RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Code] ....
View 14 Replies
View Related
Mar 30, 2016
Running Debian 8.3.
I have an external hard drive (1TB MyBook) mounted via fstab by UUID to a directory. When copying/writing/reading a lot of files from it, it randomly unmounts and remounts as a different device.
It'll start as /dev/sdb1, I'll set a lot of files to copy to it and then it'll unmount and re-acknowledge itself as /dev/sdc1, the file copying process will crash and the current directory in terminal will display an I/O error. Running mount -a remounts it back to the directory specified in fstab as /dev/sdc1 and the loop continues. If it's just idling, there's no issue, only does this under load.
How can I diagnose what is causing it to unmount?
View 14 Replies
View Related
Aug 26, 2010
Im currently installing debian on my old server, its a 64bit computer, so i've downloaded the amd64 for this project. But under the Basis Installation, of this cd image, im getting a debootstrap warning every time i want to continue the installation, the last warning i remember was something coreutils_6.10-6_amd64.deb (Something like that, not totaly sure), and im lost, can't find anything closely related to the subject.
View 11 Replies
View Related
Apr 22, 2011
I use WLM (And yes, I realise odds are this is a problem on microsofts side) and almost every time claws mail connects WLM returns a new certificate. Valid, but I have to constantly accept or deny the certificate. Why is WLM pumping out fresh certs all the time and how can I fix this?
Whenever this pops up whatever I have at the moment shows "Signature status: No certificate issuer found" and the other shows "Signature status: Correct".
View 2 Replies
View Related
Oct 19, 2010
I setup Debian a few days ago and everything was working fine. On a routine reboot to test a start-up script I turned the monitor on and realized that I could not logon to the machine locally. None of my keyboard input was making it to the username field but random things were happening. Every now and then it would say stuff like incorrect username or spontaneously jump to the password input field and then say incorrect password. I've rebooted a couple times, even without a keyboard attatched and still am seeing this. In /var/log/auth.log I show gdm going nuts trying to validate usernames.
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
[code]....
View 1 Replies
View Related
May 14, 2011
Are the repositories in fedora constantly updated or are they updated in the next release like ubuntu?
View 6 Replies
View Related
Dec 8, 2010
I'm having an issue my suse 11.3 just freezes out of no where several times during the day. this is the out put of /var/log/messages right before it freezes I have many of this:
Dec 8 21:48:03 linux-md1h kernel: [ 30.889715] [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 1
Dec 8 21:48:03 linux-md1h kernel: [ 30.889716] [drm:drm_edid_is_valid] *ERROR* Raw
[code]...
View 9 Replies
View Related
Jan 6, 2010
New Compaq 610. All good so far but the fan seems to be on continually. Checked load cycle count and seems to be okay so far.
Any ideas? It wasn't doing this before and don't remember doing anything to make it happen but I have been tweaking a bit while setting up the machine.
Hardy 8.04.3 LTS (rocks!)
View 1 Replies
View Related
Apr 12, 2010
Ubuntu 9.04 64-bit I just checked my system monitor and it looks like my memory is at a constant 900 MB's out of 4 gigs of ram. This seems high for only having firefox open.
View 5 Replies
View Related
May 1, 2011
my computer sounds as if I have been playing crysis warhead for like 5 hours, because every fan in my computer is running including the graphics card. They are not just running normal either they are running at the max.
View 4 Replies
View Related
Jun 8, 2011
it gets the hdd very warm and keeps the fan on constantly as well generally heating the whole system . was so bad i ended up having to go back to windows anything i can do to get the hdd to go in standy by when in active like windows ???? cause i hate windows and love ubuntu but i dont wanna burn up my machine to keep ubuntu
View 7 Replies
View Related
Aug 7, 2011
I've just completed a fresh install on natty, and I'm seeing constant disk writes of around 1Mb every couple of seconds.
I looked at iotop to find the culprit, and it seems to be the journalling manager for the ext4 filesystems:
Code:
215 be/3 root 0.00 B/s 19.23 K/s 0.00 % 5.89 % [jbd2/sda1-8]
Is there something I can do to adjust this behaviour somehow? I'm a bit concerned about wearing the disk out before its time...
View 2 Replies
View Related
Mar 20, 2010
i need to run a script which checks if a cd is mounted or not
View 7 Replies
View Related
Apr 6, 2010
I have installed Ubuntu from scratch several times since this problem started in Ubuntu 9*. It happens over and over again, and nothing seems to help.
My grasphic card is Nvidia 8500 GT. No matter what I try, to use no hardware drivers or use the recommended driver for Ubuntu my system shuts down without warning. I have used Ubuntu since 2004 and this is the worst bug I have ever experienced!
Is there a way to get rid of this thermal awareness program? Everything functioned fine until this stupid heat problem occurred. I want to turn it off but not to leave Ubuntu.
Lasdt night I was busy installing WinXP when my computer suddenly turned off, and Ubuntu could not be started again. Only show a screen with black and white parts and no desktop. Thats why I had to install Ubuntu again, and it turned off today while I use Firefox. Its the worst bug I have ever experienced.
View 3 Replies
View Related
May 27, 2011
I noticed that lldpad constantly takes up about 10% of cpu usage. does anyone else have this behaviour?
View 4 Replies
View Related
Aug 24, 2010
I just installed Fedora 13 on an HP Z400, and it's stuck in an endless reboot loop (lives 2 seconds before rebooting). It's a 64-bit machine and seems to meet all the hardware requirements.
View 2 Replies
View Related
Mar 19, 2011
I have a perl script which runs a mini webserver allowing me to do various things. I'd like to have this script run when the machine starts up, and constantly run in the background.How should I achieve this? I want the script to regardless of whether anyone is logged in or not, so I can't put it in any bash-related files.
View 1 Replies
View Related
Mar 23, 2010
I'm running Ultimate Edition 2.0 64bit. When I'm running Firefox and I'm not doing anything on it it starts to use the disk intensively. I checked on terminal using the top command and it IS Firefox using up to 85-90% of the resources. Anyone know what the problem is here? Can it be hacked? I already uninstalled and installed back again and it still doing it.
View 1 Replies
View Related
Apr 10, 2010
Good day, installed ubuntu 10.04 64bit yesterday on my laptop just to test everything before the release at the end of the month. However I took a look at my System Monitor and my second CPU(2) is constantly running at 100%, however theirs no apparent processes to cause this.
View 1 Replies
View Related
Apr 15, 2010
I am running 10.04 beta right now, on a hp a6740in , I have wireless usb adapter WG111v3 with me for connecting to my home network , It works perfect in windows but i am trying to get working it with Ubuntu since the past year. In 10.04 beta , It MAY connects for sometime and then drops out,trying to connect again and again, asking me to review the password each time.
I have also filed a bug about the same some 6-7 months month ago, but the ubuntu community seems busy with many other things. So i decided finally posting on the forum again , hoping to get a working solution this time(previous was when jaunty launched) This is the only thing that keeps me away from using ubuntu for my general day work, I have already searched through ubuntu forums but always end up with ndiswrapper thing which doesnt works.
View 8 Replies
View Related
