I am running a minimal debian "Squeeze" system with xfce and recently noticed a marked slowdown in my samsung nc10 netbook performance; with all other applications closed htop revealed the following process eating up cpu which explains the slowdown. Previously cpu idled at about 10%. The user is root unlike all the other processes:user:rootpu:70%
command:/usr/bin/x :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
my computer sounds as if I have been playing crysis warhead for like 5 hours, because every fan in my computer is running including the graphics card. They are not just running normal either they are running at the max.
View 4 Replies View RelatedI'm running Ultimate Edition 2.0 64bit. When I'm running Firefox and I'm not doing anything on it it starts to use the disk intensively. I checked on terminal using the top command and it IS Firefox using up to 85-90% of the resources. Anyone know what the problem is here? Can it be hacked? I already uninstalled and installed back again and it still doing it.
View 1 Replies View RelatedGood day, installed ubuntu 10.04 64bit yesterday on my laptop just to test everything before the release at the end of the month. However I took a look at my System Monitor and my second CPU(2) is constantly running at 100%, however theirs no apparent processes to cause this.
View 1 Replies View RelatedSystem:
Ubuntu 9.10
Gateway SX2802 (Core 2 Quad)
4GB RAM
750GB drive
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
Anywhere from 2 -> 6 times a day, my computer will freeze up. If any audio was playing, it will repeat the last few seconds over and over again. I've been dealing with the problem for a couple of months now, with no solutions.
View 1 Replies View Relatedthis isn't so much slackware specific as it is general linux related, but using the default huge slackware kernel included with 13.1, acpi reports cpu temps of about 55 celsius i always like to run my own kernels though, and using the latest stable kernel, i have compiled one using what i believe is necessary for my hardware, and everything works as expected except that acpi reports my cpu temp as 80 celsius at idle, causing my fan to be running constantly
so without simply using the generic config included with slack in the newer kernel, what do you think might be causing the thermal issues? i used diff on the two configs and the output is over 5,000 lines, so thats not a huge help, and im really not even sure what to be looking for the cpu is an intel i7 720qm, so if anyone might know any specific settings for that processor type needed for acpi to interface with it properly that would be much obliged here is my config for potential review: [URL] also, if i disable acpi entirely, the fan operates as normal but i cannot get readings obviously
I'm using Debian 6.0 on an Optiplex 960. My system constantly freezes. When I move the mouse (or press a key on the keyboard), my system resumes execution for approximately 2 seconds, and then freezes again. This problem is not restricted to Debian,'ve ncountered similar problems with other linux distributions on my hardware. I was wondering if anyone else had encountered this problem before, or had any ideas about how imight be resolved. I'm copying my hardware information below.CPU INFORMATION
processor: 0
vendor_id: GenuineIntel
cpu family: 6
[code]...
So I'm having troublesome issues with Debian 8.2, one of them being really costly to my productivity. This issue started maybe a month or so back, and has been continuing since. Laptop is a Toshiba C50-B-14D
During every freeze all those happen:
Screen freezes (The whole display becomes frozen, with only cursor movement - Time displayed stays frozen too)No keyboard input (even Cap & Num Lock leds will not dim once pressed)Power button (pressing once will do nothing - I have to hold for an unhealthy shutdown and reboot)Touchpad Input Works (Cursor responses to movement only, clicks/change on-hover do not.) Fans become quiet
Today at 11:46, it happened while just running Chromium. At the time:
*XFCE4 Power Management Plugin
Presentation Mode [on]
Charger was connected
Here is the syslog (I know this isn't useful as it doesn't show what's causing the issue) the freeze happened at 11:46 and 11:57 is when I rebooted back into debian.
Code: Select all----------------------CUT------------------
Oct 30 08:31:01 Badook rtkit-daemon[1315]: Supervising 4 threads of 2 processes of 1 users.
Oct 30 08:31:01 Badook pulseaudio[1364]: [pulseaudio] pid.c: Daemon already running.
Oct 30 08:41:09 Badook kernel: [Â 727.002897] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Oct 30 08:42:02 Badook pulseaudio[1312]: [alsa-sink-ALC233 Analog] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write!
[Code] ....
I also started noticing an INFO rcu message during startup:
Code: Select allroot@Badook:/# cat /var/log/syslog.1 | grep -i "rcu"
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Hierarchical RCU implementation.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Â Â RCU dyntick-idle grace-period acceleration is enabled.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] Â Â RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
Oct 29 14:39:33 Badook kernel: [Â Â 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Code] ....
Running Debian 8.3.
I have an external hard drive (1TB MyBook) mounted via fstab by UUID to a directory. When copying/writing/reading a lot of files from it, it randomly unmounts and remounts as a different device.
It'll start as /dev/sdb1, I'll set a lot of files to copy to it and then it'll unmount and re-acknowledge itself as /dev/sdc1, the file copying process will crash and the current directory in terminal will display an I/O error. Running mount -a remounts it back to the directory specified in fstab as /dev/sdc1 and the loop continues. If it's just idling, there's no issue, only does this under load.
How can I diagnose what is causing it to unmount?
Im currently installing debian on my old server, its a 64bit computer, so i've downloaded the amd64 for this project. But under the Basis Installation, of this cd image, im getting a debootstrap warning every time i want to continue the installation, the last warning i remember was something coreutils_6.10-6_amd64.deb (Something like that, not totaly sure), and im lost, can't find anything closely related to the subject.
View 11 Replies View RelatedI use WLM (And yes, I realise odds are this is a problem on microsofts side) and almost every time claws mail connects WLM returns a new certificate. Valid, but I have to constantly accept or deny the certificate. Why is WLM pumping out fresh certs all the time and how can I fix this?
Whenever this pops up whatever I have at the moment shows "Signature status: No certificate issuer found" and the other shows "Signature status: Correct".
I setup Debian a few days ago and everything was working fine. On a routine reboot to test a start-up script I turned the monitor on and realized that I could not logon to the machine locally. None of my keyboard input was making it to the username field but random things were happening. Every now and then it would say stuff like incorrect username or spontaneously jump to the password input field and then say incorrect password. I've rebooted a couple times, even without a keyboard attatched and still am seeing this. In /var/log/auth.log I show gdm going nuts trying to validate usernames.
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
Oct 18 12:15:16 Eva gdm[3287]: pam_nologin(gdm:auth): cannot determine username
[code]....
I have a perl script which runs a mini webserver allowing me to do various things. I'd like to have this script run when the machine starts up, and constantly run in the background.How should I achieve this? I want the script to regardless of whether anyone is logged in or not, so I can't put it in any bash-related files.
View 1 Replies View RelatedUsing Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.
View 5 Replies View RelatedIm running a Debian 2.6.26-2-amd64 webserver with apache2 only on a Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz that has 2GB of ram in it. I installed htop a few days ago and have been looking on it for a few days now. the server idles on about 80~ish tasks constantly with arond 20 apache tasks/connections to it all the time and the cpu usages of the 2 cores at about 1% each. but asoon as more apache2 connections/task get started and the servers tasks reach 120-140~ Apache2 timesout if you try to go to the webpage i host on the server. when it's back down to around 80~tasks you can reach the webpage once again. why is this ? what's causing this to happen ?
View 3 Replies View RelatedI have 2 computers on the same network that i need to link together to transfer files 1 is a web server the other is a minecraft server. the problem is that the file transfer will be constant as the minecraft server will constantly updates files on the web server and I dont want it to go to the router then to come back to the web server. I want to add a second network card to each computer and link them together and use this second connection to transfer the files is it possible?
View 2 Replies View RelatedSometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View Relatedi do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
I've managed to install the 32bit version on my laptop with little issue, and I'm really liking the Unity interface. There's a few issues around customisation and minor usability quirks, but from my experience with things like KDE4, I'm guessing it's only time. Anyway, I've been having major problems getting the 64bit version running with my Desktop. I have 8Gb of RAM in that, so it's not really an option to use the 32bit version. The Installer crashes constantly, but I was able to upgrade from 10.10 using update manager, but unfortunately Natty is no more stable than it's installer.
While logging in, or shortly after, the machine will crash to a text console displaying a Kernel Panic message. There's also messages indicating a problem with the CPU MCE. I've tried setting various kernel parameters at boot, such as nomce and nomodeset, these have extended the time the machine is up before crashing out, and removed the Kernel panic message, but not the crashes. I'm guessing the MCE messages were unrelated or a symptom in this case.I've done a huge amount of searching, and found no suggestions that I haven't already tried. Running Ubuntu 10.10 64 bit the system is rock solid.
I think I have found the problem to my Ubuntu laptop locking up, and it is most likely overheating. Is there any way to keep the CPU fan spinning at 100% constantly? I tried setting it up in the BIOS but it is an old laptop and I can't control it from there.
View 4 Replies View RelatedI want to know what daemon listen on *: pop3. I use
Code:
then
Code:
But in every ps command, pid of the process increment with two.
How to see the pid of that daemon/process?
I am running Debian Squeeze, apt-get update runs by itself in the background, taking up 100% of one of the two processor cores.
I have kept the system updated.
Heres the output of
Code:
Code:
I have noticed this a couple of times now, i can kill the process and it doesn't show up again ( i haven't noticed it showing up till next reboot).
I don't have update manager to set to automatically install anything, I have set it to "Only notify about available updates".
Are the repositories in fedora constantly updated or are they updated in the next release like ubuntu?
View 6 Replies View RelatedI'm having an issue my suse 11.3 just freezes out of no where several times during the day. this is the out put of /var/log/messages right before it freezes I have many of this:
Dec 8 21:48:03 linux-md1h kernel: [ 30.889715] [drm:drm_edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 1
Dec 8 21:48:03 linux-md1h kernel: [ 30.889716] [drm:drm_edid_is_valid] *ERROR* Raw
[code]...
New Compaq 610. All good so far but the fan seems to be on continually. Checked load cycle count and seems to be okay so far.
Any ideas? It wasn't doing this before and don't remember doing anything to make it happen but I have been tweaking a bit while setting up the machine.
Hardy 8.04.3 LTS (rocks!)
Ubuntu 9.04 64-bit I just checked my system monitor and it looks like my memory is at a constant 900 MB's out of 4 gigs of ram. This seems high for only having firefox open.
View 5 Replies View Relatedit gets the hdd very warm and keeps the fan on constantly as well generally heating the whole system . was so bad i ended up having to go back to windows anything i can do to get the hdd to go in standy by when in active like windows ???? cause i hate windows and love ubuntu but i dont wanna burn up my machine to keep ubuntu
View 7 Replies View RelatedI've just completed a fresh install on natty, and I'm seeing constant disk writes of around 1Mb every couple of seconds.
I looked at iotop to find the culprit, and it seems to be the journalling manager for the ext4 filesystems:
Code:
215 be/3 root 0.00 B/s 19.23 K/s 0.00 % 5.89 % [jbd2/sda1-8]
Is there something I can do to adjust this behaviour somehow? I'm a bit concerned about wearing the disk out before its time...
i need to run a script which checks if a cd is mounted or not
View 7 Replies View Related
