I know this is the 21st century, but there are a couple of floppies I needed to access and Ubuntu 10.10 couldn't read 'em. The floppy mounted, but with a disk in the drive I get "Media not found"....well, they work OK on Windoze. I found the solution on another forum. The latest version of udisks doesn't read floppies, but an old version will. You can't downgrade udisks from Synaptic, but there's a guide to downgrade here:[URL]It worked great, even for a n00b like me
error message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I want to mount a 'super floppy' which is listed in the disk utility as /dev/sdb.
I am unsure of the sequence here. Should I first mount: mount /mnt/floppy ...or something similar And next edit the /etc/fstab file....or is this step not necessary.
Finally, this is vfat formatted. Should I try to reformat it in ext or leave it as is?
I have recently installed Xbuntu on my old laptop (An IBM iSeries 2621) - yes its an old piece of kit with a USB 1.0 port, a cd-drive and an internal floppy.My problem is that even though removable media are set to auto-mount in the settings; when I put a floppy disk in, or a CD-ROM, they do not auto-mount so I cant access the disks (the laptop does not have wireless (or even an rj45 port!! - it only has an internal 56k modem) - hence why I REALLY need to get the CD-ROM working and recognised by Xbuntu as I have burned some packages that id like to install to CD-ROM. (a working floppy would definately be a bonus as id like to save my documents there)
This probably is something simple, and may have already been addressed on here.I have a 1.4MB floppy disk image file that I would like to mount as a drive.
All the drives function and mount normally under Parted Magic.
Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!
I have changed hardware and cables with no effect.
I have run the repair option on the install disk. I get a cannot find floppy error
It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.
It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem
I'm an experienced Linux developer who has run into a little problem. I'm using a National Instruments 8170 chassis, among the normal ports, it has a FDD and USB port but this model does not allow booting from a USB CDROM ( I tried a BIOS update, that didn't help either ). I made this cool customized 550MB FC8 LiveCD wtih X, GCC, various apps, etc. and a kernel 2.6.30 & 2.6.18 boot floppy disk with all the needed drivers. The floppy boots to a shell with all the busybox utils, etc. and detects the USB CDROM media and all its files.
My Question is: How do I get the kernel and initrd on the Live CD to start or boot after booting from the Floppy disk ?, I mean, I want to load linux again but this time from the CD after booting linux from floppy, if that makes sense. I'm just using the floppy to boot and recognize the USB CDROM. This can be done with MSDOS and loadlin but loadlin has an issue(it hangs) with the newer kernels (2.6.18 and greater). I searched for the loadlin source code to port it to linux but was unable to find it on the net.
I scored a Dell poweredge 6300 from a local pawn shop. It has the capability to boot from cd-rom, but apparently not with isolinux, which is what the debian installer cd uses. I was able to boot to UBCD411 (Ultimate Boot CD, which uses syslinux), but didn't see any option to boot to a CD (maybe I'm missing something here?). I tried using the boot floppy from this site. I didn't expect it to work (it's from the Woody era), and it did not. I got a message that says SYSLINUX ver.XXXX CBIOS boot failed. I went to [URL].. and looked for a boot floppy image for Lenny, but apparently it doesn't exist. I did however find the boot floppy image for Etch.
To be honest, even if I did find the Lenny floppy boot image, I'm not sure how to use it to point the system to the installer CD. So, I have two questions:
1) Does anyone know of a boot floppy image for Lenny, or if I could use the Etch boot floppy image?
2) How would one boot from floppy, then point the system to the installer CD?
System info: (4) Xeon Pentium 2 processors 500 Mhz (6) UltraSCSI hard drives (1) SCSI cd-rom drive (1) SCSI dvd-rom drive (1) Floppy drive (1) 10/100 NIC
I'm open to any other suggestions as to how I could install Debian Lenny on this machine.
When I try 'makebootdisk' and get to the 'format' stage, it tells me: "The attempt to format the floppy disk in /dev/fd0 has failed ..." The disk is fine, and can be read from, but the above msg. shows up instantly -- the light on the drive doesn't even come on. I'd expect this to be a routine problem but I can't find any solutions either here or on the web.
I want to boot Slitaz on an old laptop that can't boot from the CD drive, so I need a boot floppy which can in turn boot from the CD.Over on http://slitaz.org/en/get/ there is a link to download the floppy-grub4dos boot disk, but the link is broken. Is there an alternate source for this disk?
I am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
Is there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)
I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.
*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.
I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
I am building a v2.6 kernel floppy disk distro to run on a 1992 computer. FWIW The specs on the computer are
* 66 MHZ processor * 12 MB ram * 400 MB HD * EGA monochrome video card
It runs Linux quite nice actually. I want to get it online with a null modem cable and use the other Linux box as a gateway to the internet. I have networking, TCP and slip support in the kernel. I do now know if I have all the needed network configuration files. I am able to ping 127.0.0.1. If I try to ping the other computer, I get a "network is unreachable" error. Tell me any commands to run on either box and I will attempt to do so. Remember the old computer is running a stripped down toolset since its only two floppies worth.
There is a little strange behaviour on my usb disk. Today i try to access it and, when i list directory i cannot find one of them.A result of the command ls -l give me this result for that directory:
<code> d????????? ? ? ? ? ? directory </code>
The disk is formatted in EXT3.i try chmod and chown, but the system give me a generic I/O error.The box is a new 1Tb box, ubuntu is 11.04.
Every now and then my USB disk drops out and I get the following errors in dmesg:
But when I unplug it, and plug it back in do dmesg | tail, it doesn't pick it or any other usb storage device up (nothing comes out of dmesg this time).
So I tried to reload the module:
But as you can see I get the above error message.
They only think that works is a computer reboot (YUK!).
Any ideas: * how to determine who is using it? * force remove it * solve my main issue of usb dropping out.
Quick question - I would like to know how to prevent users from accessing directories above the directory used for ftp. I'm running proftpd and I'm able to connect outside of my LAN, however all user accounts can click "Up to higher level directoy" and access everything, all the way up to the root directory. How can I make this unaccessable/not visible to users connecting to my server, allowing access only to the directories and subdirectories I have specified?
i'm having some problems booting ubuntu 9.10 and i just want to backup my files and install it all over again.I want to access my old files from the ubuntu Live CD, because no kernel is working.Is there a way?. Just in case, i don't have partitions, so i don't have a 'home' one (but i'm going to
On a modern system--Lucid, SATA 3.0--does the location of a file on the physical disk make an appreciable difference to its access speed? If so, is there a (safe) way to put a file in a particular place on the disk?
I ask because I would like to reserve some space on disk to remain unused without messing with the partition table. My thought was to do this by using dd to create some large files (4 Gb each, or so) containing zeros.But obviously I would like to put them on the slowest part of the disk, as they won't be used for anything.
