Hardware :: Mythdora Will Not Power Off After Shutdown
Jun 12, 2011
I have a PCChips M830 version 5 motherboard with AMD Duron 666mhz cpu and 786mb DDR ram. I installed Mythdora 12.23 for playing videos on my tv and music on my stereo. Eventually I hope to get DSL out in the sticks where I live and can then stream movies from Netflix. I did not install MythTV. The installation went fine and I had no errors. I've done a lot getting it ready and it is stable. The problem I'm having is it will not power down. When I click "Shut Down" and then press F1 I can see the shutdown procedure and all looks fine until it gets to "Power Down".
At which time it freezes and I have to flip the power switch on the power supply for it to power down. If I open a terminal and do "su root" and use "shutdown -h now" it exhibits the same behaviour. I've looked through the bios settings several times paying close attention to the "Power Management" section and have not seen anything relating to this. Doesn't seem like a big problem I know, but it keeps me from booting the machine from LAN since the ethernet card WOL settings are lost when powering down with the power supply switch.
View 5 Replies
ADVERTISEMENT
Jan 24, 2010
I've been using Ubuntu on and off since 8.04, but only last week decided to make a real switch across to it.After installing 9.10 64bit though, my laptop while running Ubuntu just turns itself off at completely random times - it doesn't seem to go through any shut down procedure or anything, it's more like the power's just suddenly cut. It sometimes happens 5 minutes after being turned on, or sometimes 4 or 5 hours, it really is random.I really have no idea where to even begin trying to stop this. I think it must be a software thing because this has never happened with windows or earlier versions of Ubuntu, but other than that I don't know what to do to stop this.I'm dual booting Windows 7 32bit and Ubuntu 9.10 64bit, and this is on a Toshiba L350-D 11-D laptop, which has a 64bit AMD processor.
View 3 Replies
View Related
Jan 20, 2011
I would like a program that will auto shutdown my Linux machine when it detects low power or X amount of minutes remaining on UPS. I don't have NIC's in my UPS's so that's why I am asking... Not even sure it is possible for the Linux machine to detect when it switches to AUX power.
View 4 Replies
View Related
May 16, 2010
just recently I upgraded from 9.10 to 10.04. Now whenever I shut down computer gets stuck after umounting disks etc, so I have to shut down using power button, similar to this error[URL]
View 2 Replies
View Related
May 10, 2011
I found an application AUTO POWER ON & SHUTDOWN in windows which is really very useful to those who have night unlimited broadband connection. I searched for similar application in UBUNTU as I am slowly shifting to UBUNTU from 10.04 (maveric) version. Whenever I search for application or for other options, so many have written failed attempts only.
View 5 Replies
View Related
Dec 15, 2009
This OS is has been cloned from the drive of another computer. The motherboard is now an SIS730. I assume the hardware is sufficiently different to prevent the OS from shutting down the computer.How do I fix this? ---without installing, if possible.
View 2 Replies
View Related
Mar 6, 2010
for some reason, my opensuse 11.2 can not shut down as normal. by pressing ctrl-alt-F1 and issuing "init 0", the console displays the following messages and then stops there. Segmentation fault Master Resource control: runlevel 0 has been reached skipped services in runlevel 0: SuSEfirewall2_setup I have to push power button to shut down it.
View 2 Replies
View Related
Nov 9, 2010
I just did a clean reinstall of Ubuntu (10.04 --> 10.10). After the install, any time I do CPU intensive work, my PC is suddenly shutting down like it's overheating. Everything was working fine for months, and started having problems immediately after the reinstall. so this is not a problem with my hardware, and it's not a problem with my fans needing cleaning -- it's a problem with software. So please don't tell me "that sounds like overheating, clean your fans". Something is different in software-land between 10.04 and 10.10 that is causing this to happen.
I have checked my log files, and can't find anything related to overheating -- searches for things related to lm_sensors, "temp", and "thermal" are not turning up anything in the system logs (syslog, kern.log, or messages). I also looked at the logs around the times of the sudden shutdown, and couldn't find anything unusual. How can I diagnose this? I'd like to file a bug report, but since I can't find anything in the logs, I honestly have no idea how to go about providing useful information. Is there anything besides overheating that might be causing my laptop to suddenly shut off? (I am using a Gateway M-6888u laptop, btw)
View 3 Replies
View Related
Jul 8, 2009
I have a Genius K627 Keyboard with Power, Sleep and Wake buttons. ACPI is unsupported on my computer, but it can turn off its power supply when the system halts (PM is ok). I would like to bind the Power key on the keyboard to execute the /sbin/halt command. What I already know is that I can specify an event in inittab (kbrequest) that would execute a command. What I don't know how I can make my system receive pressing Power button as a kbrequest. The scancodes of Power button on the keyboard (by showkey): 0x74 0xf4
This is the line I was talking about in my inittab:
Code:
ce:12345:kbrequest:/sbin/halt
I think I should edit /etc/console/boottime.kmap.gz but don't know how I could insert this scancode into it.
View 8 Replies
View Related
Jul 13, 2009
I have built a Centos 5.3 server for a friend of mine that is being used as a NAS server. The server has 4 1TB drives in a RAID 5 configuration and a dedicated non raid system drive for the OS. My friend isnt very Linux literate so I need this bow to be relatively simple. I have worked most of it out but have a question with regards to remote reboot.
I need to be able to shut this device down through the power switch without human intervention (at the moment when the power switch is pushed the server asks to confirm shutdown) the server wont have a Monitor connected so this isn't practical. Is it possible to use the power switch to do an clean, immediate shutdown?
The other option is shutdown through a web page is this something that has been done before? I know he can do it through terminal by issuing a shutdown now command but as I said this guy wants something simple. I don't really want to explain everytime he needs to shut the Server down how to do it if he can just do it via a website or even with the power button.
View 1 Replies
View Related
May 1, 2010
I have machine which I am using a server for all my office activities. We have fedora (11.0) installed in that system. When even power goes out system is getting shut-down abruptly. We have UPS for this system and some times UPS also runs out of power. Do we have any software, which monitors battery power and shutdown the system gracefully, when system knows that power is running out. I am using desktop machine, not a laptop. So I may some hardware like battery which runs fot sometime, even though there is no power. Then there will software which monitors and shut down the system gracfully.
View 3 Replies
View Related
May 18, 2010
technically, this is UNR with lxde installed after extended UNR use. i like being able to hit my power button in gnome, and getting a message asking what you want to do, or cancel if needed. well, in lxde, the shutdown button brings up a similar message. could i map the power button to show that popup in lxde?
View 1 Replies
View Related
Jun 1, 2010
I am currently using a Ubuntu Netbook Remix 9.04
When I press the power button, I see a dialogue box which asks for confirmation and if nothing is confirmed system automatically shuts down in 60 seconds.
I want to change this time of 60 seconds to say 30 seconds. Is it possible? Also is there a way to hide that dialogue box...
View 1 Replies
View Related
Jun 25, 2010
I have a dell zino inspiron media pc with Ubuntu 10.04 installed. I am able to shutdown using the power button on machine i.e. System->Preferences->Power Management option 'when power button is pressed': choose 'Shutdown'.But for option 'when suspend button is pressed', I only get 'Suspend' or 'Hibernate' in the drop-down. Where is my 'Shutdown' option?I really want to be able to shutdown my machine from my wireless keyboard!
View 1 Replies
View Related
Apr 3, 2011
After a recent upgrade, the red power icon in the far right of the upper panel disappeared. In its place is a half obscured copy of my user name, which appears right next to my user name (along with the chat icon). The chat icon/user name is functional, as it is supposed to be, but the half obscured user name that replaced my shutdown/restart power icon is just a bug, and has no function. Not only is it unsightly, but I miss the power icon. Yes, I can right-click on the panel and add one, but it doesn't allow me to drag it all the way to the far upper-right corner, where it is supposed to be located... I found this post in another thread: sudo apt-get install indicator-applet-session, but it did nothing to solve my problem.. I'm running 64-bit 10.10, btw, if that makes any difference.
View 9 Replies
View Related
Aug 8, 2010
I have upgraded my netbook system to lenny. I got almost every thing working right except gnome-power-manager shutdown event. It shows critical battery level (red color) on its applet on the panel but it does not do the normal safe shutdown action. Instead, it just do a sudden shutdown of the system which causes the lose of some data. Is there any way to solve this issue using lenny's current version (2.22.1-4)?My netbook is AcerOne.
View 1 Replies
View Related
Nov 3, 2010
I have Ubuntu 10.10 on e-machine T-1221 I can shut down the machine using :
sudo shutdown -h from terminal
I can shutdown using powerbutton on case. I can't use the applet indicator powerbutton in root account, but, I can use the command under "System-->-Shutdown" in root account, but I don't see "System-->-Shutdown" in users account. Is there a way to add it ? I installed Debian 6.0 Squeeze on my Acer Aspire 3620 Laptop it works just fine and has the same Gnome Desktop. The only thing different is that there is no powerbutton available thru Gnome applets, only the command on menu under" Sytem-->-Shutdown", which I'm fine with on this machine.
These are the things I tried on emachine T-1221
I tried "acpi=force"
I tried "noacpi"
I tried "noacpi nolapic"
I read the bug reports it stated that on live-cd there was only suspend and hibernate. There is no shutdown or reboot. I tried: "#start acpi", it closed with errors. It said that Ubuntu uses upstart. Is there a script which you can add to power button to add the shutdown.? Really I don't necessarily need powerbutton, I think the work around would be adding the command to "System-->-Menu.
View 3 Replies
View Related
Aug 25, 2011
I'm trying to shutdown my Fedora 15 host when my virtualbox VM shutsdown to make it easier for my users. Their VM's automatically load on power upIs there a way to detect when the virtual box service stops to trigger Fedora to automatically power down?
View 1 Replies
View Related
Dec 10, 2010
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
View 1 Replies
View Related
Jun 4, 2010
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
View 2 Replies
View Related
Jun 21, 2010
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
View 2 Replies
View Related
Apr 4, 2011
I'm looking for any power monitoring devices for Linux to allow monitoring power quality, voltage changes, and outages. This would be for North American three phase power system. I want to have this data fed live to my own program. It should be something much better than just jury-rigging a circuit to fee the power waveform into 2 or 3 audio cards.
View 10 Replies
View Related
Oct 30, 2010
I had unplugged my PC last night as sometimes there's storms at night this morning I plugged in PC and the power light is blinking and the PC wont come on at all tried different power cord, same result
PC is a AMD athlon64 3300+ 2.4ghz SiS graphics
probably the power-supply or what?
If it is the power supply, how do I find new one as I've never had to replace anything on it or any other PC?
Also, I really need access to the hard drive but it's a weird hard drive and was wondering if I could put that hard drive in my K7 PC, which already has 2 drives in it can a pc have 3 drives? do I have to add/have another ribbon cable for 3rd drive?
View 4 Replies
View Related
Feb 5, 2011
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
View 2 Replies
View Related
Jun 30, 2010
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies
View Related
May 28, 2010
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies
View Related
Apr 22, 2010
I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
View 2 Replies
View Related
Jun 20, 2010
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies
View Related
Sep 7, 2010
Ubuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
View 3 Replies
View Related
Dec 10, 2010
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies
View Related
